USE_PU_NAME_IN_XID


	The USE_PU_NAME_IN_XID parameter keyword applies to Communications Server only.


Required?	No
Keyword Type	Boolean
Default	0
Multiples Allowed?	No, only one for each LINK_STATION keyword

   USE_PU_NAME_IN_XID = (
      @TYPE = BOOLEANKEYWORD 
      @DEFAULT = 0
    )

The USE_PU_NAME_IN_XID parameter specifies whether the PU_NAME value in this LINK_STATION keyword should be used instead of the FQ_CP_NAME value from the NODE keyword during XID3 negotiation at link startup. Valid values are:

0: Use the CP name in XID3 negotiation
1: Use the PU name instead of the CP name in XID3 negotiation

This field is ignored unless ADJACENT_NODE_TYPE is specified as HOST_DEP_LU_ONLY or SUBAREA_LEN (Communications Server), or BACK_LEVEL_LEN_NODE or HOST_XID3 (Personal Communications).

This parameter is optional. The default is 0; use the node CP name during XID3 negotiation.

USE_PU_NAME_IN_XID

Submit Your Feedback

Submitted Feedback