MAX_SEND_BTU_SIZE
| Required? | No |
| Keyword Type | Unsigned number |
| Multiples Allowed? | No, only one for each LINK_STATION keyword |
MAX_SEND_BTU_SIZE = (
@TYPE = UNSIGNEDNUMBERKEYWORD
)
The MAX_SEND_BTU_SIZE parameter specifies the maximum BTU size that can be sent from this link station. This value is used to negotiate the maximum BTU size that can be transmitted between a link station pair.
This parameter is optional.
Note:
- If the link is not HPR-capable, this value must be set to a value greater than or equal to 99.
- If the link is HPR-capable, this value must be set to a value greater than or equal to 768.
- If the Personal Communications TN3270E LU sessions configure using an IBM EEDLC connection over a VPN client, then the TN3270E LU sessions cannot be established. The VPN client adds its security data, resulting in a maximum BTU size that is greater than allowed for IBM EEDLC connection. To solve this problem, user has to edit the configuration file (*.acg) using a text editor and change the value of MAX_SEND_BTU_SIZE & MAX_RCV_BTU_SIZE between 1200 to 1450 under the LINK_STATION section for EEDLC link.
 |
For a multipath channel (MPC) DLC, MAX_SEND_BTU_SIZE should be specified as 32 768 to allow the DLC to determine the size. |