LS_NAME

Required? Yes
Keyword Type String
Field Length 1–8
Multiples Allowed? No, only one for each LINK_STATION keyword
   LS_NAME = (
      @TYPE = STRINGKEYWORD
      @FIELD_LENGTH = 1,8
      @REQUIRED = 1
    )

The LS_NAME parameter specifies the 1- to 8-byte name used to identify a connection.

All eight characters must be specified. Valid characters are any locally displayable characters using the native encoding of the local system.

This parameter is required.

Note:
During device configuration, the link station name $ANYNET$ is automatically defined when the AnyNet® SNA over TCP/IP device is configured. This has the effect of informing the SNA Node Operations application that this is the link station to which independent LU session traffic that is to be routed by the AnyNet® DLC should be sent. A link station of this name must be defined on a port over the AnyNet® DLC if AnyNet® routing is required. This definition can not be changed or deleted.