ADJACENT_NODE_ID

Required? No
Keyword Type Hexadecimal string
Field Length 1–8
Multiples Allowed? No, only one for each LINK_STATION keyword
   ADJACENT_NODE_ID = (
      @TYPE = HEXSTRINGKEYWORD
      @FIELD_LENGTH = 1,8
    )

The ADJACENT_NODE_ID parameter specifies the node ID of the adjacent node. An adjacent node is directly connected to this node via this link definition.

Specify a block ID of 3 hexadecimal characters and a PU ID of 5 hexadecimal characters.

This parameter is optional.


The Communications Server icon
Note:
  1. If ADJACENT_NODE_TYPE indicates that the adjacent node is a T2.1 node (END_NODE, LEARN, NETWORK_NODE, or SUBAREA_LEN), this parameter is ignored unless it is nonzero, and either ADJACENT_NODE_TYPE is set to SUBAREA_LEN or the adjacent node does not send a network name control vector in its XID3.
  2. If ADJACENT_NODE_TYPE is specified as HOST_DEP_LU_ONLY or HOST_XID0, this parameter is ignored.
  3. If ADJACENT_NODE_TYPE is specified as DSPU_XID and this parameter is specified as nonzero, it is used to check the identity of the downstream PU.
  4. If ADJACENT_NODE_TYPE is specified as DSPU_NO_XID and DSPU_SERVICES is specified as PU_CONCENTRATION, this parameter is ignored.
  5. If ADJACENT_NODE_TYPE is specified as DSPU_NO_XID and DSPU_SERVICES is specified as DLUR, this parameter is used to identify the downstream PU to the DLUS.

The Personal Communications icon
Note:
  1. If ADJACENT_NODE_TYPE indicates that the adjacent node is a T2.1 node (END_NODE, LEARN, NETWORK_NODE, or SUBAREA_LEN), this parameter is ignored unless it is nonzero, and either ADJACENT_NODE_TYPE is set to SUBAREA_LEN or the adjacent node does not send a network name control vector in its XID3.
  2. If ADJACENT_NODE_TYPE is specified as HOST_DEP_LU_ONLY, this parameter is ignored.