Welcome
Getting Started
Overview of CICS VR installation
This information describes all the necessary steps to successfully set up CICS VR 6.3. It includes a detailed description of the various CICS VR components and how to set them up. The CICS VR server address space is required for batch logging, backup notification, and backout failure notification.
LNKLST updates
Libraries need to be added to the LNKLST concatenation for the CICS VR server.

What's new in CICS VR 6.3
CICS® VR 6.3 contains these changes.
Operating environment
CICS® VR uses logs to recover your VSAM data.
CICS VR Overview
Getting Started
- Introducing CICS® VR
  CICS® VSAM Recovery Version 6 Release 3 (CICS VR) recovers your lost or damaged VSAM data.
- Overview of CICS VR installation
  This information describes all the necessary steps to successfully set up CICS VR 6.3. It includes a detailed description of the various CICS VR components and how to set them up. The CICS VR server address space is required for batch logging, backup notification, and backout failure notification.
  - Running CICS® VR JCL customization
    CICS® VR JCL customization is an optional step that assists you to customize the CICS VR sample jobs, clists, and ISPF dialog skeletons.
  - LPALST updates
    Add the library DWW.V630.SDWWLPA to the LPALST. To add the library dynamically to the LPALST issue the SETPROG command.
  - LNKLST updates
    Libraries need to be added to the LNKLST concatenation for the CICS VR server.
  - SYS1.PARMLIB updates
    The parameters required to activate the CICS VR server address space are discussed here with some example settings.
  - Define the RCDS data sets
    To allocate your final RCDS data sets so that they can both be used by the ISPF interface and the server address space, you must follow the RCDS naming convention.
  - Activating the CICS VR server address space
    The commands that are required to activate the CICS VR server address space.
  - Setting up the ISPF interface
    To run IVP jobs the ISPF interface must be set up first, using the sample JCL and pre-allocated data sets.
  - Running the IVP jobs to verify your CICS VR installation
    When you have completed the installation of the CICS VR server address space you run the following IVP jobs to verify your installation using the following CICS VR installation verification procedures (IVPs) to confirm that CICS VR is operational. You must also run the CLIST to activate the ISPF interface in order to complete the IVP process.
- Migration considerations
  Consider these general migration considerations when you migrate to CICS® VR 6.3 from an earlier release.
- Activating the CICS® VR server address space
  The CICS® VR server address space provides a communication vehicle for CICS VR and other applications. It must be active if you want to use any of these CICS VR functions.
- Setting up CICS® VR VSAM batch logging
  CICS® VR VSAM batch logging, referred to as batch logging, provides logging of updates made to VSAM data sets by batch jobs. Two types of batch logging are available, forward recovery logging and undo logging.
- CICS® VR security
  Security has been enhanced to protect the RCDS from being updated by any user. It is possible to specify that the users security profile must be checked before allowing certain information in the RCDS to be added, changed, or deleted.
CICS® VR and CICS® TS
CICS VR Exits
Running CICS® VR forward recovery
CICS® VR forward recovery consists of a restore and then forward recovery.
Running CICS® VR backup
The information in the following topics describe how to take a backup using CICS® VR. The panels and secondary windows are in the sequence that they are displayed during a backup job generation.
Running CICS® VR reorganization
You can reorganize a VSAM sphere using CICS® VR. VSAM sphere reorganization can increase the space of a sphere and its alternate indexes. It can also change the control interval sizes for a sphere's components.
Working with other VSAM sphere list pull-down menus
The CICS® VR recovery and backup functions are typically accessed using the Utilities pull-down menu after selecting VSAM spheres.
Working with CICS® Backout Failed spheres
The CICS® Backout Failed sphere list shows the CICS spheres registered for manual recovery or reorganization after CICS notification of a backout failure.
Working with logs
Using ISMF data set lists with CICS® VR
CICS® VR is integrated with ISMF so that you can create a CICS VR recovery job for the data sets in an ISMF data set list by entering the VSAMREC line operator or list command. When you enter the VSAMREC line operator or list command, the necessary CICS VR panels are called and you can create a recovery job for the VSAM sphere.
Running CICS® VR manually
IBM® recommends that you use the CICS® VR panel interface to create recovery jobs for your VSAM spheres. Using the CICS VR panel interface eliminates the need for you to manually keep track of daily update activity, logs, backups, etc. Also, the CICS VR panel interface automatically creates the recovery JCL for you.
Running CICS® VR batch backout
The CICS® VR batch backout utility allows you to remove updates that were made to KSDS, ESDS, RRDS, and VRRDS VSAM spheres by steps in a batch job. This section describes how to run the CICS VR batch backout utility.
Understanding CICS® VR reports
The CICS® VR forward recovery and batch backout utilities produce a set of reports upon successful completion. The reports are written to the data set allocated to the DWWPRINT ddname. However, the set of reports written for the forward recovery backout utilities differ from the set of reports written for the batch backout utilities.
Understanding IBM® program support
The IBM® Customer Engineering Program Support structure helps you resolve problems with IBM products, and ensures that you can make the best use of your IBM computing systems.
Problem determination procedures
If you have to contact IBM® personnel about a CICS® VR problem, you must classify and describe the problem.
Diagnosing the causes of abends
You can determine the cause of a CICS® VR abend in a number of ways.
Reference information
The reference sections of the information contain reference information that you need when you use CICS® VR.
Glossary
The terms in this glossary are defined as they pertain to the CICS VSAM Recovery documentation.
Edition notice
This is the information for CICS VSAM Recovery for z/OS. It applies to CICS VSAM Recovery for z/OS Version 6.3, and to all subsequent versions, releases, and modifications until otherwise indicated in new editions. Make sure you are using the correct edition for the level of the product.
Download PDF
Download the PDF format documentation for CICS VSAM Recovery for z/OS 6.3

LNKLST updates

Libraries need to be added to the LNKLST concatenation for the CICS VR server.

Add these libraries to the LNKLST concatenation:

DWW.V630.SDWWLOAD
DWW.V630.SDWWLENU

Use the following command sequence to update the LNKLST dynamically with the new library names:

Figure 1. Update LNKLST

P LLA
T PROG=AA
IEE252I MEMBER PROGAA FOUND IN SYS1.PARMLIB
CSV500I LNKLST SET LNKLST68 HAS BEEN DEFINED
IEF196I IEF237I C90A ALLOCATED TO SYS00340
IEF196I IEF285I DWW.V630.SDWWLOAD
IEF196I IEF285I VOL SER NOS= TOTCI3.
CSV501I DATA SET DWW.V630.SDWWLOAD 886
HAS BEEN ADDED TO LNKLST SET LNKLST68
S LLA,SUB=MSTR
SETPROG LNK,UPDATE,JOB=*

Use the display LLA command to verify that the LNKLST contains the correct library names. The L character on the left to the library name indicates that it is in the current LNKLST.

This example shows the output of the command:

Figure 2. Display LLA command

D LLA
CSV600I 06.48.20 LLA DISPLAY 292
EXITS: CSVLLIX1 - ON CSVLLIX2 - OFF
VLF: ACTIVE GET LIB ENQ: YES SEARCH FAIL COUNT: 0
LNKLST SET: LNKLST66
94 LIBRARY ENTRIES FOLLOW
ENTRY L F R P LIBRARY NAME
1 L IGY.SIGYCOMP
...
...
10 L SYS1.SC66.LINKLIB
11 L CPAC.LINKLIB
12 L DWW.V630.SDWWLENU
...
...
45 L DWW.V630.SDWWLOAD

APF authorizing CICS VR libraries

The CICS VR SDWWLOAD and SDWWLENU libraries are required for the CICS VR server and must be authorized. Add these libraries to the list of APF-authorized libraries in the appropriate PROGxx (or IEAAPFxx) member in SYS1.PARMLIB:

DWW.V630.SDWWLOAD
DWW.V630.SDWWLENU

If your list(s) of APF-authorized libraries are specified in the dynamic format, in a PROGxx member, refresh the APF list dynamically using the SETPROG or SET PROG=xx command.

If your list(s) of APF-authorized libraries are specified in the static format (in IEAAPFxx members), schedule an MVS IPL for the APF-authorization to take effect.

For information about maintaining lists of APF-authorized libraries, see the z/OS MVS Initialization and Tuning Reference.