Welcome
Messages and codes
This section describes the messages that the Collector, Query interface, Dependency Reporter, Affinities Reporter, Load Module Scanner, CSECT Scanner, and Builder can issue, and the transaction abend codes that the Collector can produce.
CIU2168W
Option option is invalid

Preface
This information describes the IBM® CICS® Interdependency Analyzer for z/OS®. It explains what the program does and how to set up and run its various components.
What's new in CICS® IA Version 6.1
CICS® IA Version 6.1 continues to support a wide range of capabilities and fully supports new CICS Transaction Server 6.3. Building on previous releases, CICS IA Version 6.1 contains updates to reflect those commands for which CICS Transaction Server 6.3 has updated the threadsafe status allowing more applications to run without requiring a switch to QR TCB mode.
Overview of the CICS® Interdependency Analyzer
This section gives an overview of the CICS® Interdependency Analyzer (CICS IA), and describes its components.
Getting Started with the CICS® IA plug-in for CICS Explorer®
The CICS® Interdependency Analyzer plug-in for CICS Explorer® provides an Eclipse-based interface to analyze your CICS IA data. It also provides cheat sheets that guide you through the steps required to configure and install CICS IA. It is recommended that you download the CICS IA plug-in and follow the steps in the cheat sheets.
Configuring CICS® IA
This section describes what you need to do before you can use CICS® IA.
Running the Collector
You run the CICS® IA Collector to look for instances of program commands that might cause resource dependencies or transaction affinities.
Updating the Dependency and Affinity database objects
The Dependency database objects contain accumulated data about your applications and the resources that they use. Update the database objects regularly to add new information recorded by the Collector in the VSAM dependency files.
Managing your CICS® IA data
With each new release CICS® IA captures more data. In volatile development environments this data can soon become out of date. If you have out of date data, the CICS IA plug-in might retrieve more data than you need. The presence of unwanted data might impede your analysis and provide confusing results.
The CICS® IA UDB database
CICS® IA provides jobs to unload CICS IA data into CSV files. These files can be used to populate the IBM® supported UDB databases.
Running the Reporter
Running the Program Threadsafe report
The threadsafe report can be run from the CICS IA Explorer plug-in or as a batch job using the sample CIUJTSQ2 that can be found in SCIUSAMP.CICS. The report runs the Db2® stored procedure CIUSPTSR.
Running the Load Module Scanner
The Load Module Scanner scans load modules for instances of program commands that could cause resource dependencies or transaction affinities.
Running the CSECT Scanner
The CICS® IA CSECT Scanner scans load modules for information that can be used to identify the version of each CSECT.
Running the Builder
The CICS® IA Builder runs as a batch job to build affinity-transaction-group definitions suitable for input to the CICS system management product, CICSPlex SM.
Running the sample Db2® query
This section describes how to run the sample CICS® IA batch query job CIUJSAMP.
Solving problems
This section helps you to isolate and determine the cause of CICS® IA problems.
Details of dependencies and affinities collected
Correlating Load Module Scanner and Dependency Reporter output to source
The structure of the CICS® IA database
Messages and codes
This section describes the messages that the Collector, Query interface, Dependency Reporter, Affinities Reporter, Load Module Scanner, CSECT Scanner, and Builder can issue, and the transaction abend codes that the Collector can produce.
- Contacting IBM® Support
  Information on IBM® support policy can be found on our Web site.
- Messages that CICS® IA can issue
- CIU1000E
  CIUMSGE Language Module Not Found
- CIU1001I
  Begin CICS® IA IVP for TS version: CICS-version-number
- CIU1002I
  Installation verification ended successfully
- CIU1003E
  Transaction verification failed, transaction ID: transaction-name
- CIU1004E
  Program verification failed, program ID: program-name
- CIU1005E
  VSAM file verification failed, file ID: file-name
- CIU1006I
  Transaction verified, transaction ID: transaction-name
- CIU1007I
  Program verified, program ID: program-name
- CIU1008I
  VSAM file verified, file ID: file-name
- CIU1009E
  Verification unsuccessful — highest return code: return-code
- CIU1010I
  TD queue verified, TD queue ID: TDqueue-name
- CIU1011E
  TD queue verification failed, TD queue ID: TDqueue-name
- CIU1012I
  DB2ENTRY verified, DB2ENTRY ID: DB2entry-name
- CIU1013W
  DB2ENTRY verification failed, DB2ENTRY ID: DB2ENTRY-name
- CIU10141
  DB2TRAN verified, DB2TRAN ID: DB2TRAN-name
- CIU1015W
  DB2TRAN verification failed, DB2TRAN ID: DB2TRAN-name
- CIU1016I
  JOURNALMODEL verified, model ID: model-name
- CIU1017E
  JOURNALMODEL verification failed, model ID: model-name
- CIU2101W
  CINT already in use by user userid
- CIU2102W
  Collector is not state
- CIU2103W
  Collector is already stopped
- CIU2104W
  Invalid key was pressed
- CIU2105I
  CINT session has ended
- CIU2106W
  Options must be Y(Yes) or N(No)
- CIU2107W
  Size must be integer (10 to 2000 Mb)
- CIU2108W
  Select a valid date/time format
- CIU2109W
  Select a valid date/time separator
- CIU2110I
  No amendments were entered
- CIU2111I
  CINT options are updated
- CIU2113W
  Options must be Y(Yes), N(No) or blank(default)
- CIU2114I
  Records are restored
- CIU2115I
  Dependency files are emptied
- CIU2116W
  Dataspace too large - no storage available
- CIU2117W
  Dataspace too large - IEFUSI limit reached
- CIU2118I
  No records were restored
- CIU2119I
  CICS® is terminating
- CIU2120I
  Press Enter to confirm Start with data restore or PF12 to cancel
- CIU2121I
  Press Enter to confirm Start without restore or PF12 to cancel
- CIU2122I
  Press Enter to confirm Stop or PF12 to cancel
- CIU2123I
  Enter to confirm Start ALL or PF12 to cancel
- CIU2124I
  Enter to confirm Stop ALL or PF12 to cancel
- CIU2125E
  A CINT action must be supplied
- CIU2126I
  No actions to take
- CIU2127W
  Transaction ID prefix is invalid
- CIU2128W
  Language code is invalid
- CIU2129W
  Control file CIUCNTL not open in the FOR
- CIU2130W
  Dependency file CIUINTn not open in the FOR
- CIU2131W
  Control file CIUCNTL is not available
- CIU2132W
  Dependency file CIUINT1 is not available
- CIU2133W
  Error opening Control file CIUCNTL
- CIU2134W
  Error opening Dependency file CIUINT1
- CIU2135S
  CICS® command data failed RESP=eibresp RESP2=eibresp2 RCODE=eibrcode
- CIU2136W
  Exclude list name is invalid
- CIU2137I
  Affinity files are emptied
- CIU2138W
  Options must be Y(Yes), N(No), or D(Detail)
- CIU2139W
  Options must be Y(Yes), N(No), D(Detail) or blank(default)
- CIU2140W
  Value must be between 2 and 9999, or 1 for no updates
- CIU2141W
  Options must be A (Affinity), I (Interdependency), or B (Both)
- CIU2142W
  Options must be A (Affinity), I (Interdependency), B (Both), or blank
- CIU2143W
  Options must be Y (Yes), N (No), A (Aff.), I (Dep.), or B (Both)
- CIU2144W
  Options must be Y (Yes), N (No), A (Aff.), I (Dep.), B (Both), or blank
- CIU2145I
  All files are emptied
- CIU2146I
  Press Enter to confirm REFRESH or PF12 to cancel
- CIU2147I
  Press Enter to confirm REFRESH ALL or PF12 to cancel
- CIU2148I
  CINT applid CICS® Resource options are updated
- CIU2149I
  CINT applid Db2/MQ/IMS/CPSM options are updated
- CIU2150I
  CINT applid General options are updated
- CIU2151I
  CINT applid Time and Date options are updated
- CIU2152I
  CINT applid CICS® Affinity options are updated
- CIU2153I
  CINT applid Global options are updated
- CIU2154I
  CINT applid Task options are updated
- CIU2155I
  CINT applid Natural resource options are updated
- CIU2159E
  Task collection trigger value must be between 1 and 9999
- CIU2160I
  CINC session has ended
- CIU2161I
  CICS® is terminating
- CIU2162W
  Control file CIUCNTL is not available
- CIU2163W
  Error opening Control file CIUCNTL
- CIU2164W
  There are no connected CICS® regions
- CIU2165W
  Too large number of selected regions
- CIU2166W
  Invalid selection of APPLID
- CIU2168W
  Option option is invalid
- CIU2170W
  Options must be 1, 2, 3 or N(No)
- CIU2185I
  CINT region-name Application Collection Options are updated.
- CIU2186E
  Maximum applications-amount applications can be selected for dependency collection.
- CIU2186I
  CINT region-name Application Collection Options are updated by user ID.
- CIU2187I
  Enable collection of Application Data collection-option.
- CIU2188E
  Wrong option for collection of Application Data.
- CIU2188S
  Memory allocation error at point point-number.
- CIU2189E
  For DEFAULTS, Application Collection Option must chosen.
- CIU2191I
  CINT region-name Application Collection Options are set to DEFAULTS
- CIU2192I
  CINT region-name Appl. Coll. Options are set to DEFAULTS by user ID. (Appl. Coll. is abbreviated because of TDQ limits)
- CIU2193S
  Error opening CICS® IA Applications file.
- CIU2201S
  CICS® command data failed RESP=eibresp RESP2=eibresp2 RCODE=eibrcode
- CIU2202S
  VSAM filetype file filename command failed RESP=eibresp RESP2=eibresp2
- CIU2204I
  CINT being used by userid
- CIU2206S
  CICS® command PROGRAM program failed RESP=eibresp RCODE=eibrcode
- CIU2207E
  Db2® table error on tablename SQL code code
- CIU2208E
  CICS® region is not connected to IBM® Db2®
- CIU2209S
  Records in control file CIUCNTL have incorrect format
- CIU2210S
  Create dataspace action failed REASON=reason code ERROR=error code
- CIU2211S
  Create table action failed REASON=reason code TABLE=table number
- CIU2212S
  Add element action failed REASON=reason code TABLE=table number
- CIU2213S
  Stop of collector has failed during Start processing
- CIU2214I
  Collector is now state
- CIU2215S
  Stop of Collector has failed
- CIU2216S
  Destroy pool action failed REASON=reason code ERROR=error code
- CIU2217S
  Destroy table action failed REASON=reason code TABLE=table number
- CIU2218S
  CINT has abended abend code in program program
- CIU2219I
  Data type collector is now state
- CIU2220S
  Create CPOOL action failed REASON=reason code
- CIU2221S
  Function call failed: FUNCTION=function code REASON=reason code
- CIU2222S
  Destroy CPOOL action failed REASON=reason code
- CIU2224S
  Error calculating space utilisation
- CIU2225E
  Unsupported type of CINT task initiation
- CIU2226E
  Incorrect CINT action: action
- CIU2227I
  Non-terminal CINT task initiating
- CIU2228S
  Replace element action failed REASON=reason code TABLE=table number
- CIU2229S
  UT/TT table update failed FUNC=function code REASON=reason code TABLE=table number
- CIU2230S
  VSAM dependency file filename header READ failed RESP=eibresp RESP2=eibresp2
- CIU2231I
  Number of records restored = count
- CIU2232E
  CICS® Release release is not supported by the Collector
- CIU2233W
  CIUINTDT call failed REASON=reason code
- CIU2236I
  EXEC CICS DISABLE STOP for program exitprog OK
- CIU2238I
  EXEC CICS DISABLE EXITALL for program exitprog OK
- CIU2239S
  DISABLE EXITALL for program exitprog failed RESP=eibresp RCODE=reason code
- CIU2240I
  EXEC CICS ENABLE EXIT for program exitprog, EXIT exit OK
- CIU2241I
  EXEC CICS ENABLE EXIT START for program exitprog OK
- CIU2242I
  EXIT PROGRAM exitprog already disabled
- CIU2243I
  EXEC CICS ENABLE TRUE for program exitprog OK
- CIU2244S
  Exclude list name has invalid contents at offset offset
- CIU2245S
  Dump domain function function failed RESP=resp RCODE=rcode
- CIU2246E
  Collector is not in START or PAUSED state
- CIU2247W
  CICS® IA dataspace is nn percent full
- CIU2248I
  CINT applid CICS® Resource options are updated by userid
- CIU2249I
  CINT applid Db2/MQ/IMS/CPSM options are updated by userid
- CIU2250I
  CINT applid General options are updated by userid
- CIU2251I
  CINT applid Time and Date options are updated by userid
- CIU2252I
  CINT applid CICS® Affinity options are updated by userid
- CIU2253I
  CINT applid Global options are updated by userid
- CIU2254I
  CINT applid Task options are updated by userid
- CIU2255I
  CINT applid Natural resource options are updated by userid
- CIU2256I
  CINT command_name is requested by userid for applid
- CIU2257I
  CINT Collector runtime options for applid:
- CIU2258I
  options_list
- CIU2275W
  Control file CIUCNTL not open in the FOR
- CIU2276S
  CICS® command data failed RESP=eibresp RESP2=eibresp2 RCODE=eibrcode
- CIU2277S
  USER record is not found in the CIUCNTL control file
- CIU2278S
  USER record in the CIUCNTL control file has incorrect format
- CIU2279S
  CONTROL1 record is not found in the CIUCNTL control file.
- CIU2280S
  REGION record is not found in the CIUCNTL control file.
- CIU2281S
  CINC has abended abend in program program
- CIU2283I
  CINC being used by userid
- CIU2284S
  Records in control file CIUCNTL have incorrect format
- CIU2285E
  Unsupported type of CINC task initiation
- CIU2287E
  CICS® Release release is not supported by the CINC
- CIU2288S
  CINC abending - internal error elsewhere in the CINC
- CIU2289I
  CINC command flow options are updated by userid
- CIU2290I
  options_list
- CIU2291S
  CICS® command PROGRAM program failed RESP=eibresp RCODE=eibrcode
- CIU2292I
  EXEC CICS® ENABLE EXIT for program exitprog, EXIT exit OK
- CIU2293W
  CINC Collector is already active for userid
- CIU2294W
  Max concurrent CINC Collector sessions limit reached
- CIU2295W
  User journal name journal_name value is already used by other active user
- CIU2296I
  CINC Collector runtime options for userid
- CIU2297W
  CINC Collector is not started in all/some your regions
- CIU2298I
  CINC Collector is started in your regions
- CIU2299W
  CINC Collector is not started. All options are empty.
- CIU2300W
  CINC Collector is not started. Option option is empty
- CIU2301W
  CINC Collector is not started. Some regions are not connected.
- CIU2303W
  CINC Collector is not stopped. There are no active collector sessions.
- CIU2304W
  CINC Collector is not stopped. There are no connected regions.
- CIU2308I
  CINC Collector is stopped by uuuu
- CIU2309I
  CINC Collector has logged nnnn records for uuuu
- CIU2310W
  CINC Collector is not stopped. Option option is empty.
- CIU2311I
  CINC Collector is stopped for uuuu. Limit of tasks: nnnn .
- CIU2312I
  CINC Collector is stopped for uuuu. Limit of records: nnnn .
- CIU2313W
  Invalid cursor position
- CIU2314W
  CINC already in use by user userid
- CIU2316W
  CINC Collector is not started. All regions are not connected
- CIU2317W
  CINC Collector is already active for some regions
- CIU2319W
  Updates are rejected because CINC Collector is running for userid
- CIU2320I
  CINC Collector is stopped. Total records written: number
- CIU2321W
  APPLIDs applidID is not found in control file. Updates are rejected.
- CIU2322W
  Duplicate APPLIDs applidID specified. Updates are rejected.
- CIU2323W
  Journal Copy Criteria option is invalid. Enter LAST, USER or CFID
- CIU2324W
  CINC Collector is not started in all your regions
- CIU2325W
  CINC Collector is started in some your regions
- CIU2326W
  CINC was not completed for userid
- CIU2327W
  CICS® ApplIDs option is empty
- CIU2328W
  CINC Collector was not completed for userid
- CIU2329S
  An abend occurred in program program for region region
- CIU2330S
  CINC Collector for USERID userid1 is already started by userid2
- CIU2331W
  Privileged Collection not started. In use by another privileged user userid
- CIU2332W
  Privileged Collection not started. In use by general users.
- CIU2333W
  General Collection not started. In use by privileged user userid
- CIU2335W
  The value for the Authority field is incorrect
- CIU2336W
  Wildcard characters in the UserID field are not allowed for general users
- CIU2351E
  Invalid journal type in model
- CIU2352I
  Logstream lsname assigned for CINC user userid
- CIU2353E
  Different Control file names
- CIU2354I
  User exit exit was loaded
- CIU2500I
  There is no action to process.
- CIU2501W
  No more users allowed. Maximum limit of users reached.
- CIU2502I
  No users were added.
- CIU2503I
  User userid was not copied.
- CIU2504E
  Cannot manage user userid. It is in use by someone else.
- CIU2505E
  User userid has "ACTIVE" status. Stop CINC collector and try again.
- CIU2506I
  User userid was not updated.
- CIU2507W
  Confirm the deletion of user userid.
- CIU2508I
  The deletion of user userid was cancelled.
- CIU2509W
  Journal name must begin with a letter.
- CIU2510E
  Cannot delete user userid – CINC session is active.
- CIU2511W
  User name can contain national characters. It must be alphanumeric.
- CIU2512W
  Journal name can contain national characters. It must be alphanumeric
- CIU2513E
  Cannot update user userid – CINC session is active.
- CIU2514I
  User userid was added.
- CIU2515E
  Cannot add user userid – CINC user or CINT region already exists.
- CIU2516E
  Cannot add user userid – internal error occurred.
- CIU2517W
  Cannot update user userid – CINC collector is active.
- CIU2518I
  User userid updated.
- CIU2519E
  Update failed – user userid does not exist.
- CIU2520E
  Cannot update user userid – internal error occurred.
- CIU2521E
  CICS® TS release is current_release. Release required_release or higher is required.
- CIU2522W
  Consequences of deleting user with unknown status are unpredictable.
- CIU2523I
  CICS® Interdependency Analyzer for z/OS® - nnnnnn
- CIU3117I
  CINT options refreshed
- CIU3301I
  CINB task is starting
- CIU3302S
  CINB received an unrecognizable request
- CIU3303S
  CINB has abended abend code in program program
- CIU3304S
  CINB abending - system error elsewhere in the Collector
- CIU3305I
  CINB save started - because of reason
- CIU3306I
  CINB save ended - count records saved
- CIU3307I
  CINB terminated - Collector is stopping
- CIU3308I
  Message received from program program
- CIU3309I
  Collector action by date/time options
- CIU3310S
  Invalid file number for table in GWA
- CIU3311E
  Transaction CINB must be initiated by transaction CINT
- CIU3312S
  CINB abending - CICS® is terminating
- CIU3313S
  Invalid address for program in the GWA
- CIU3314S
  Function call failed FUNCTION=function code REASON=reason code TABLE=table number
- CIU3315S
  File filename is full
- CIU3316S
  Unexpected resource type resourcetype
- CIU3318I
  Tasks before stopping:: nnnn .
- CIU3319I
  Records before stopping: nnnn .
- CIU3320I
  CIUCPOOL: Limit of cells is exceeded. NNNNN records rejected
- CIU3321I
  Performance Monitoring is activated.
- CIU3322I
  Performance Monitoring is deactivated
- CIU3323I
  The TCB switch counter data is not available
- CIU3324I
  CINB: count type records saved
- CIU3325I
  CINB: DETAILED: count records type type saved
- CIU3326I
  New dependencies total: count
- CIU3327I
  New resource details total: count
- CIU3371I
  Transaction CINS is starting
- CIU3372S
  Transaction CINS has abended with abend code in program program.
- CIU3373E
  Transaction CINS must be initiated by transaction CINT.
- CIU3374I
  Transaction CINS has terminated - Collector is stopping.
- CIU3380I
  Collector Statistics not available for this period of time.
- CIU3401I
  Master System trace flag is set ON
- CIU3402I
  Master User trace flag is set ON
- CIU3405I
  Master System trace flag is restored OFF
- CIU3406I
  Master User trace flag is restored OFF
- CIU3407I
  Error at setting Master trace flag. Response code: eibresp
- CIU3408I
  ENTER TRACENUM for program name failed RESP=eibresp . HL_TRACE forced to N
- CIU4100S
  Function call failed FUNCTION=function code REASON=reason code TABLE=table number
- CIU4200S
  Dataspace is full
- CIU4300E
  Interaction with Natural failed REASON=reason
- CIU4301S
  Service service failed RCODE=rcode REASON=reason
- CIU4302S
  Interface with Natural is disabled.
- CIU4307S
  Interaction with Natural failed REASON=reason
- CIU4308S
  CICS® command data failed RESP=eibresp RESP2=eibresp2 RCODE=eibrcode
- CIU4309S
  Interaction with Natural has abended abend code
- CIU5000S
  Function call num is invalid for module
- CIU5001E
  filename control record not found for applid applid. Run canceled
- CIU5003E
  Some action failed. Return/ABEND code=return reason=reason
- CIU5004E
  GENCB failed for filename CB=control block RC=return code REASON=reason code
- CIU5005S
  File number filenum is invalid
- CIU5006S
  Attempt to actionfilename. File is type
- CIU5007S
  RPL number rplnum is invalid for filename
- CIU5008S
  Table number table number is invalid
- CIU5012E
  Invalid PARM specified. Program terminated.
- CIU5015E
  Invalid {MATCH | STATE | CONTEXT} value specified. Correct and rerun
- CIU5016E
  DSPSIZE value is not numeric. Correct and rerun
- CIU5017E
  DSPSIZE is invalid. It must be between 2 and 2000
- CIU5018E
  Load of modname has failed AC=abcode RC=reason_code
- CIU5019E
  Dataspace too large - no storage available
- CIU5020E
  Dataspace too large – IEFUSI limit reached
- CIU5021E
  Create dataspace failed REASON reason_code ERROR error_code
- CIU5022E
  Create table failed REASON reason_code TABLE table_number
- CIU5023E
  Keyword keyword is invalid or unexpected
- CIU5024E
  Keyword keyword is missing
- CIU5025E
  A value of value is invalid for keyword keyword
- CIU5026E
  Invalid CREATE type
- CIU5027E
  Incorrect number of brackets
- CIU5028E
  Missing semicolon
- CIU5029E
  Keyword keyword is duplicated
- CIU5030E
  No valid statements in REPGRPS – processing terminated
- CIU5031E
  CIUTABM error function element TABLE table_number REASON reason_code MODULE progname
- CIU5032E
  No HEADER record found – statement ignored
- CIU5033E
  Duplicate TRANGRP name
- CIU5034E
  Transaction group has not been previously created
- CIU5035W
  Dependency data may be be incomplete because of abend type abend
- CIU5036E
  Dataspace is full
- CIU5037E
  No valid transaction IDs in REPGRPS – processing terminated
- CIU5038E
  Invalid AFFLIFE for AFFINITY
- CIU5039E
  PARM keyword is duplicated. Correct and rerun
- CIU5040E
  Invalid REMOVE type
- CIU5041E
  Report type is not recognized — processing terminated
- CIU5042I
  Error reading Applid input – processing terminated
- CIU5043I
  Error reading CIUCNTL file – processing terminated
- CIU5044E
  Db2® table error on tablename SQL code code
- CIU5050E
  OPTION ERROR: modulename A VALUE OF optionvalue IS INVALID FOR OPTION optionname.
- CIU5051E
  modulename ERROR ON OPEN OF CIUOPTS
- CIU6002E
  Bad parameter: xxx
- CIU6003I
  Last use timestamps will not be updated
- CIU6004I
  Last use timestamps will be updated
- CIU6005I
  Number of new rows added to tablename = nnnn
- CIU6006I
  Number of existing rows in tablename = nnnn
- CIU6007I
  Number of rows updated in tablename = nnnn
- CIU6008E
  SQL error: xxxxxxxx, yyyyyyyyy
- CIU6010E
  File error: xxxxxxxx, yyyyyyyyy
- CIU6011I
  **** QSAM OUTPUT STATISTICS FOR TABLE tablename ****
- CIU6012I
  -------------------------------------
- CIU6013I
  Number of processed records:
- CIU6014I
  Number of existing rows:
- CIU6015I
  Number of rows updated:
- CIU6016E
  CIU_THREADSAFE_CMD table is empty.
- CIU6017I
  QSAM CSV files will be produced
- CIU6018E
  QSAM error, xxxxxxxx, yyyyyyyy. X=program name; y=diagnostic information
- CIU6019I
  Journal records read = nnnnnnnn
- CIU6020I
  Trace records written = nnnnnnnn
- CIU6021W
  No rows selected for processing from tablename
- CIU6022I
  **** UPDATE STATUS FOR TABLE tablename ****
- CIU6023I
  Number of new rows added:
- CIU6024E
  SQLERRMC: sqlerrmc
- CIU6030I
  CONTROL1 record added to control file
- CIU6031I
  CONTROL1 record already exists
- CIU6032I
  Defaults record added to control file
- CIU6033I
  DEFAULTS record already exists
- CIU6034I
  APPLID region record added to control file
- CIU6035I
  APPLID region record already exists
- CIU6036I
  Number of regions added =number
- CIU6037I
  Number of existing regions =number
- CIU6038I
  Number of error records =number
- CIU6039W
  No input records found for //REGIONS
- CIU6040E
  Input record error – add region(aaaaaaaa,ssss,_dumphlq_)
- CIU6041E
  CICS® APPLID must be 1 to 8 characters
- CIU6042E
  CICS® SYSID must be 1 to 4 characters
- CIU6043W
  No input records found for //CIUMIGXT
- CIU6044I
  Parse OK - Number of APPLS added =
- CIU6045I
  Parse failed - XML-EVENT: XML-TEXT:
- CIU6046I
  Number of duplicate rows fixed in tablename = count
- CIU6047I
  Number of applications migrated =
- CIU6048E
  Length of APPLIC code > 8
- CIU6049E
  Length of APPLIC name > 50
- CIU6050E
  Length of APPLIC tran > 4
- CIU6051E
  Length of APPLIC program > 8
- CIU6052I
  Unknown record type type was read from file file. The record is skipped.
- CIU6053I
  Data records read: number.
- CIU6054I
  Data records processed: number.
- CIU6055I
  Data records skipped: number.
- CIU6056W
  procedure_name warning. SQL contention occurred while modifying Db2 tables data.
- CIU6057E
  procedure_name error. Invalid parameter specified: parameter.
- CIU6058S
  procedure_name SQL error. SQLCODE=sql_code ERRMSG="db2_error_message".
- CIU6059I
  Db2 procedure procedure_name ended with RC=return_code.
- CIU6064E
  CICS IA Dump HLQ must be 1 to 8 characters and non-blank - for DEFAULTS.
- CIU6065E
  SYSID must be ''DFTS'' for DEFAULTS.
- CIU6067E
  Translation table modname length is invalid
- CIU7000I
  5655-U86 (C) Copyright IBM® Corp. 2001, 2023
- CIU7001S
  An irrecoverable error has occurred in module module.
- CIU7003I
  Enter a valid option
- CIU7027I
  No regions defined to CICS® IA
- CIU7028W
  Invalid action code.
- CIU7029I
  Action processed successfully.
- CIU7030I
  Start/Stop request cancelled.
- CIU7031E
  Connection to remote region not acquired
- CIU7032E
  Connection to remote region not found
- CIU7033I
  Enter new Applid and Sysid
- CIU7034I
  New Applid already exists
- CIU7035I
  Press Enter to confirm delete or PF12 to cancel
- CIU7036I
  Request cancelled
- CIU7037I
  State must be STOPPED before you can delete
- CIU7038I
  Options 1-3 not valid for single region file
- CIU7039I
  Press Enter to confirm action or PF12 to cancel
- CIU7041I
  CICS® IA not installed in target region
- CIU7042I
  Option number not valid for item
- CIU7043I
  Maximum of 200 records in control file
- CIU7044I
  CINC Action processed successfully.
- CIU7046E
  CINC user userid entry not found.
- CIU7047S
  CINC Unknown request has been received.
- CIU7052E
  Region name record Control file has an incorrect format.
- CIU7053E
  Region name record is not found in Control file.
- CIU7100I
  CICS IA beta trial period is over.
- CIU8000E
  The file you have selected could not be found. Please select another file.
- CIU8001E
  File read error: an internal key value is not a valid integer. Please select another file.
- CIU8002E
  File read error: an internal key value is not a valid integer. Please select another file.
- CIU8003E
  File read error: an internal key value is not a valid integer. Please select another file.
- CIU8004E
  File read error: an internal key value is not a valid key value. Please select another file.
- CIU8005E
  File read error: an internal key value is not a valid key value. Please select another file.
- CIU8006E
  File read error: an internal key value is not a valid key value. Please select another file.
- CIU8007E
  File read error: APPS must be a 3 character code.
- CIU8008E
  File read error: error reading the selected file.
- CIU8009E
  Error closing file.
- CIU8040E
  The URL provided in the CICS® IA Preferences appears invalid. Please check the Host URL given in the CICS IA Preferences.
- CIU8045E
  Communication with the host failed.
- CIU8050E
  Communication with the host failed.
- CIU8055E
  The data could not be displayed in a table. Please try the client again. If the problem persists contact IBM® support.
- CIU8060E
  Copy fail: Cannot copy row numbers. Select another cell and try again.
- CIU8061E
  Copy fail: No Cell in the table was selected. Select an individual cell and try again.
- CIU8067E
  FileIO error: error saving FILENAME. Please try again.
- CIU8068E
  FileIO error: error overwriting file. Please try again.
- CIU8100I
  All available data for this query retrieved from the host.
- CIU8101I
  There are more records to be retrieved.
- CIU8102I
  No data to retrieve for this query.
- CIU8103W
  CICS® region is not connected to IBM® Db2®. See message CIU8200I in the CINT log.
- CIU8104W
  Invalid Application code. See message CIU8202W in the CINT log.
- CIU8105W
  Enter a valid 2 digit KEY1 field. See CIU8203W in the CINT log.
- CIU8106W
  Enter correct WHERE clause. See message CIU8204W.
- CIU8107W
  No columns selected for display. See message CIU8206W.
- CIU8108E
  Bad CICS® return code. See message CIU8205E in the CINT log.
- CIU8109E
  Bad SQL return code. See message CIU8201E in the CINT log.
- CIU8110E
  Client and server not compatible. See message CIU8207E in the CINT log.
- CIU8111E
  No message file found on host.
- CIU8120E
  Invalid return code from the host. Contact IBM® support.
- CIU8200W
  CICS® region is not connected to IBM® Db2®
- CIU8201E
  Db2® table error on function SQL code code
- CIU8202W
  Enter a valid 3 digit application code.
- CIU8203W
  Enter a valid 2 digit KEY1 field.
- CIU8204W
  One or more WHERE fields are not alphanumeric.
- CIU8205S
  CICS® command failed RESP=resp RESP2=resp2
- CIU8206W
  No columns SELECTED for display.
- CIU8207E
  Client and server not at the same service level.
- IUXA
- IUXB
- IUXD
- IUXE
- IUXF
- IUXG
- IUXI
- IUXT
- IUXU
- IUXV
- IUXW
- IUXX
- IUXY
- IUXZ
- IUYA
- IUYC
- IUYE
- IUYG
- IUYH
- IUYI
- IUYJ
- IUYK
- IUZ0
- IUZ1
- IUZ3
- IUZ4
- IUZ5
- IUZ6
- IUZ7
- IUZ8
- IUZ9
- IUZA
- IUZB
- IUZC
- IUZD
- IUZF
- IUZH
- IUZI
- IUZJ
- IUZN
- IUZO
- IUZQ
- IUZR
- IUZS
- IUZT
- IUZU
- IUZV
- IUZX
- IUZY
- IUZZ
- Collector table manager diagnostics
  This section lists the meaning for each possible value of the call parameters that are included in the error messages issued if an error occurs on a call to the Collector table manager, CIUTABM.
- Collector CINB request queue manager diagnostics
  This section lists the meaning for each possible value of the call parameters that are included in the error messages issued if an error occurs on a call to the Collector CINB request queue manager, CIUCINP.
- Date formatter diagnostics
CICS® IA space considerations
CICS® IA security
CICS® IA External Interfaces
The Appendix describes available Stored Procedures and Command Flow user exit.
Collecting dynamic COBOL calls
CICS® IA detects dynamic COBOL calls, which are collected by the Dependency and Command Flow Data collectors.
Accessibility
Accessibility features help a user who has a physical disability, such as restricted mobility or limited vision, to use software products successfully
Download PDF
Download the PDF format documentation for CICS Interdependency Analyzer for z/OS 6.1

CIU2168W

Option option is invalid

The Option input field on a screen is invalid because it contains an embedded blank space character, or starts with a digit, or has more than one wildcard character.

The input is rejected.

Correct the invalid input.

CIUACM10, CIUACM20, CIUAWSDA, CIUAWSCF

Destination

Terminal end user and CINT TD queue.