USE_CONSTANT_RTS

Required? Yes
Keyword Type Boolean
Default 1
Multiples Allowed? No, only one for each PORT_SDLC_SPECIFIC_DATA parameter
   USE_CONSTANT_RTS = (
      @TYPE = BOOLEANKEYWORD
      @REQUIRED = 1
      @DEFAULT = 1
    )
The USE_CONSTANT_RTS (request-to-send) parameter specifies whether flow control is used between an adapter and the modem. Valid values are:
0
The adapter waits for the CTS (clear-to-send) signal before sending data to the modem.
1
There is no flow control to the modem.

This parameter is required. The default is 1.

By default, for a synchronous data link control (SDLC) connection, constant RTS is specified. When this local station is a secondary link station on a multidrop connection, constant RTS should not be specified.