Welcome
Messages
Messages
HPS5069
Attempt to set connection state to {0} is not valid.

What's new in HATS 10
HATS prerequisites
Getting Started
User's and Administrator's Guide
Web Application Programmer's Guide
Cloud Deployment
Messages
- Messages
  - HAT0001
    Loading configuration data from {0}.
  - HAT0002
    The message log file is {0}.
  - HAT0003
    The trace log file is {0}.
  - HAT0040
    A program exception occurred. There may be additional messages in this log which describe the error. The following information may help determine the cause, if this log is requested by IBM® service: {0}
    {1}
  - HAT0060
    File {0} was not found.
  - HAT0061
    Directory {0} was not found.
  - HAT0062
    Archive file {0} could not be created.
  - HAT0300
    An unexpected exception was received: {0}
  - HAT0350
    An error occurred reading the file {0}.
  - HAT0351
    An error occurred writing the file {0}.
  - HAT0352
    Cannot find the file named {0}.
  - HAT0353
    Creating the file {0}.
  - HAT0354
    Failed to delete the file named {0}.
  - HAT0360
    Licenses used ({0}) exceeding licenses purchased ({1}). For more information on licensing enablement, see the InfoCenter at ({2}).
  - HAT0361
    HATS License key is corrupt. Default assigned. For more information on licensing enablement, see the InfoCenter at ({0}).
  - HAT0362
    HATS License key is missing. Default assigned. For more information on licensing enablement, see the InfoCenter at ({0}).
  - HAT0363
    HATS Error reading HATS License key. Default assigned. For more information on licensing enablement, see the InfoCenter at ({0}).
  - HAT0400
    An exception occurred creating the host configuration. A message containing the exception details follows.
  - HAT0401
    Cannot connect to the host using the following session properties:{0}
  - HAT0402
    Session is in CONNECTION_ACTIVE state, but not CONNECTION_READY state. A possible reason could be that the TN server port specified does not support the data stream expected. Session properties being used:
    {0}
  - HAT0403
    Cannot load the application {0}.
  - HAT0405
    Session is ready, but no host data was available. Session properties:{0}
  - HAT0410
    An error occurred while processing this request. Detailed error information: {0}
  - HAT0411
    The host connection is inactive.
  - HAT0412
    An error occurred while processing an application Web page "{0}".
  - HAT0413
    An exception occurred. {0}
  - HAT0414
    An error occurred while scanning for screen matches.
  - HAT0415
    The wfhats.xml file is malformed.
  - HAT0416
    An error occurred while forwarding control to WebFacing.
  - HAT0600
    An error occurred while retrieving the action list for the screen customization "{0}".
  - HAT0601
    The action {0} specifies an invalid parameter.
  - HAT0602
    Cannot insert null value to the host screen at row {0}, column {1}.
  - HAT0603
    Cannot insert the value {0} to the host screen at row {1}, column {2}, because the host screen size is {3}.
  - HAT0604
    An exception occurred while calculating the value for the global variable {0}. The action which failed was {1}. A message containing the exception details follows.
  - HAT0605
    An error occurred while processing the actions for the screen customization "{0}".
  - HAT0606
    Global variable "{0}" does not exist.
  - HAT0607
    The index {0} for global variable "{1}" is out of bounds. The global variable has {2} elements.
  - HAT0608
    Cannot insert the value "{0}" to the host screen at row {1}, column {2}, because the location is not contained in an unprotected field.
  - HAT0700
    The attribute "{0}" of widget setting does not exist.
  - HAT0701
    The value of attribute "{0}" in widget setting is empty.
  - HAT0702
    The value of attribute "{0}" in widget setting is invalid.
  - HAT0703
    An error occurred while processing a transformation fragment {0}.
  - HAT0800
    An exception occurred setting the property of print session. A message containing the exception details follows.
  - HAT0801
    An exception occurred processing PDF I/O to client browser. A message containing the exception details follows.
  - HAT0910
    User credentials could not be retrieved from Web Express™ Logon.
  - HAT0911
    Web Express™ Logon macro could not be initialized.
  - HAT0912
    Web Express™ Logon cannot retrieve user credentials because the client servlet request was not provided.
  - HAT0913
    Web Express™ Logon cannot retrieve user credentials because the credential mapper was not initialized.
  - HAT0914
    Verify that the connection has been configured to support Web Express™ Logon.
  - HAT0915
    The plug-in {0} is not appropriate for the environment it is running in. Be sure to choose the proper plug-in implementation class for IBM® or Standard portlet environments.
  - HAT1300
    Event payload type must be serializable.
  - HPS5001
    The value {0} of the attribute {1} in the XML element {2} is not a valid value
  - HPS5007
    Failed to delete the file named {0}
  - HPS5008
    There was an error reading the file {0}
  - HPS5009
    There was an error writing the file {0}
  - HPS5010
    The installation directory parameter {0} specifies a directory {1} that is not an absolute path
  - HPS5011
    The installation directory parameter {0} specifies a path {1} that does not exist
  - HPS5012
    {0} is not a directory
  - HPS5013
    The XML element {0} is missing the required attribute {1}
  - HPS5014
    The initialization parameter {0} is missing. It should specify the installation directory name
  - HPS5015
    The XML element {0} is missing either the attribute {1} or the attribute {2}
  - HPS5016
    The XML element {0} is not a valid element in the file {1}
  - HPS5017
    Unexpected error {0} occurred. {1}
  - HPS5018
    An unexpected exception has occurred. {0}.
  - HPS5019
    There was an XML parse error while reading the file {0} or its DTD file at line {1} in column {2}. The error message is {3}
  - HPS5020
    An exception occurred while parsing XML file {0} : {1}.
  - HPS5021
    Invalid value of attribute {0} in object {1}. {0} can only be greater than 0.
  - HPS5022
    Invalid value of attribute {0} in object {1}. {0} cannot be equal to 0
  - HPS5023
    Invalid value of attribute {0} in object {1}. {0} can only be 0 or higher
  - HPS5024
    Invalid value of attribute {0} in object {1}. {0} can only be -1 or higher.
  - HPS5025
    Missing mandatory attribute {0} in object {1}
  - HPS5027
    Error creating object {0}. Object {1} not defined.
  - HPS5028
    Object {0} already defined
  - HPS5029
    The runtime is not started.
  - HPS5030
    {0} expired. Cannot get a connection from {1}.
  - HPS5031
    Object {0} not defined
  - HPS5032
    Cannot load Pool Manager {0}
  - HPS5033
    Too little memory. {0} bytes available
  - HPS5034
    No HttpSession available
  - HPS5035
    There is no data source object {0} in HttpSession. A possible cause is the use of multiple browsers from a single machine to a chained application. See documentation for more information.
  - HPS5036
    Attempt to create user list with invalid type: {0}.
  - HPS5037
    Attempt to create user list with invalid name: {0}.
  - HPS5038
    Error creating object {0}. Object is empty
  - HPS5039
    Cannot get a User from user list {0}
  - HPS5040
    Invalid value of attribute {0} in object {1}. {0} can only be -1 or greater than 0
  - HPS5041
    Value of attribute {0} specified, but no file name specified.
  - HPS5043
    Internal error, attribute {0} in Conn object is null.
  - HPS5044
    SQL connection is closed.
  - HPS5045
    JDBC exception while checking connection state : {0}
  - HPS5046
    JDBC driver {0} not loadable, received exception: {1}
  - HPS5047
    JDBC getConnection call failed for URL {0}, received exception: {1}
  - HPS5048
    Call to method {0} not expected for JDBC connections.
  - HPS5049
    The following Session properties are not acceptable to HOD : {0}. Exception received: {1}
  - HPS5050
    Cannot recover connection if HodLogonSpec is null.
  - HPS5051
    Cannot recover connection if logon or alternate logon macros are null
  - HPS5052
    Cannot set up a connection to the host using the following session properties: {0}
  - HPS5053
    Received InterruptedException: {0}
  - HPS5054
    Macro state STATE_EMPTY not reached. Current® macro state is {0}
  - HPS5055
    Ran out of time while playing HOD macro: Macro file name = {0} Macro = {1}
  - HPS5056
    Problem encountered while playing macro in file {0} Current® state is {0} Initial fragment of the macro: {1}
  - HPS5057
    PropertyVetoException received from HOD: {0}
  - HPS5058
    MacroException received from HOD: {0}
  - HPS5059
    HOD extract event {0} not expected. Extracts are not permitted in logon or logoff macros
  - HPS5060
    Both UserPool and BeanRef are null - cannot provide value for prompt {0} to HOD macro
  - HPS5061
    Ran out of time while supplying prompt values to HOD macro in file {0}. Exception received: {1}
  - HPS5062
    Macro prompt value could not be provided. Exception received: {0}
  - HPS5063
    Received the following MacroErrorEvent while playing HOD macro: {0}
  - HPS5064
    No get_userid method (with either 0 or 1 argument) in bean
  - HPS5065
    No get_password method in bean
  - HPS5066
    No "getter" method {0} for parameter {1} in bean {2}
  - HPS5067
    Exception received when calling getter method in bean: {0}
  - HPS5068
    Exception received: {0}
  - HPS5069
    Attempt to set connection state to {0} is not valid.
  - HPS5070
    Cannot change originating Pool. Old: {0}, New: {1}.
  - HPS5071
    Cannot change connection specification. Old: {0}, New: {1}
  - HPS5072
    There is no Pool Manager
  - HPS5073
    An encryption key is needed to start the system.
  - HPS5074
    An encryption key is needed because user list {0} is encrypted.
  - HPS5075
    Received STATE_PLAY_ERROR while playing macro in file {0}
  - HPS5077
    Session is in CONNECTION_ACTIVE state, but not CONNECTION_READY state. A possible reason could be that the TN server port specified does not support the data stream expected. Session properties being used: {0}
  - HPS5079
    HOD macro {0} has one or more syntax errors
  - HPS5080
    Invalid value of attribute {0} in object {1}. {0} can only be -1 or greater than {2}
  - HPS5081
    The value {0} assigned to the attribute {1} in the file {2} is not valid. It should be a number. A value of {3} will be used.
  - HPS5082
    Missing property {0} in user list {1}
  - HPS5083
    Failed to find the file named {0}
  - HPS5084
    Could not set up a connection
  - HPS5085
    Licenses used ({0}) exceeding licenses purchased ({1}). For more information on licensing enablement, see the InfoCenter at ({2}).
  - HPS5086
    Invalid value of attribute {0} in object {2}. {0} cannot be greater than attribute {1}. The value of attribute {1} will be used.
  - HPS5090
    System start
  - HPS5091
    System shutdown
  - HPS5092
    {0} Security attribute {1} appears to be corrupted, or the encryption key is incorrect. {2}
  - HPS5093
    {0} Invalid schema value for {1} property. {2}
  - HPS5094
    {0} User property {1} conflicts with schema. {2}
  - HPS5095
    User {0} not found in user list {1}
  - HPS5096
    Pool {0} exceeded its capacity. Overflow connection created
  - HPS5097
    Pool {0} exceeded its capacity. Request failed
  - HPS5098
    Ran out of time while playing HOD macro: Macro file name = {0} Macro = {1} Exception received: {2}
  - HPS5099
    Internal error, the following attribute or result is unexpected {0}
  - HPS5100
    User ID {0} from UserPool {1} was used to set up a session to host {2}, and must be recovered
  - HPS5101
    The WebSphere® servlet engine cannot create an HttpSession object to store the host connection with the key {0}.
  - HPS5102
    Insufficient rights to the file {0}. Please check file owner and permissions
  - HPS5103
    The data source connection has been removed, probably because the maxBusyTime has expired
  - HPS5107
    User list {0} not found
  - HPS5108
    Connection Pool {0} not found
  - HPS5109
    Hostname {0} cannot be resolved
  - HPS5110
    RemoteException received when making RMI call: {0}
  - HPS5111
    Integration object {0} has no methods. Check your Java™ CLASSPATH
  - HPS5117
    Key {0} not present in message file
  - HPS5136
    There is no runtime on host "{0}" named {1}.
  - HPS5137
    Checkin screen did not match current PS. Connection = {0} ECL error = {1} Screen description = {2} Screen dump = {3}
  - HPS5142
    License limit has been reached. No further connections are allowed. For more information on licensing enablement, see the InfoCenter at ({0}).
  - HPS5143
    An Exception was caught when creating an HOD screen for connection {0}. This probably is caused by an environment configuration problem. Perhaps the X Window System DISPLAY variable is not set, or RAWT is not configured properly.
  - HPS5145
    Cannot connect to the host using SSL. If importing a certificate is required for this SSL connection, make sure that it has been imported from the Telnet server into a valid PKCS12 file, and that the password (SSLP12Password) and path (SSLP12FilePath) for the PKCS12 file are specified correctly. The session properties are: {0}
  - HAT5551
    Parameter {0} is missing
  - HAT5552
    Conflicting parameters {0}
  - HAT5556
    File has been opened {0}
  - HAT5557
    File not found {0}
  - HAT5561
    A fix for {0} cannot be applied to {1}.
  - HAT5562
    {0} fix information for {1} was not found in {2}
  - HAT5563
    {0} cannot be restored because it has not been applied
  - HAT5564
    {0} cannot be committed because it has not been applied
  - HAT5565
    Fix {0} has an unknown type {1}
  - HAT5571
    CAPAR {0} was applied on {1}
  - HAT5572
    CAPAR {0} was committed on {1}
  - HAT5573
    CAPAR {0} has an unknown state {1}
  - HAT5574
    APAR {0} was applied on {1}
  - HAT5575
    APAR {0} was committed on {1}
  - HAT5576
    APAR {0} has an unknown state {1}
  - HAT5577
    Fix type {0} is a valid type for {1}
  - HAT5578
    APAR {0} for build {1} will be applied to build {2}
  - HAT5579
    CAPAR {0} for build {1} will be applied to build {2}
  - HAT5581
    Source file {0} is available
  - HAT5582
    There are no CAPARs applied to this component.
  - HAT5583
    There are no APARs applied to this component.
  - HAT5584
    There are no CAPARs or APARs applied to this component
  - HAT5585
    The {0} build level is {1} dated {2}
  - HAT5586
    Report for {0} version {1}
  - HAT5587
    CAPAR {0} includes fix {1}
  - HAT5588
    APAR {0} includes fix {1}
  - HAT5589
    {0} is not applied or committed
  - HAT5590
    {0} is included in fix {1}
  - HAT5591
    {0} cannot be applied because it was superseded by {1}
  - HAT5592
    {0} cannot be applied until prereq fix {1} is committed
  - HAT5593
    {0} cannot be applied because it requires prereq fix {1}
  - HAT5594
    {0} has already been applied
  - HAT5595
    Write permission is denied for target {0}.
  - HAT5596
    Source file {0} is missing
  - HAT5597
    Read permission is denied for {0}
  - HAT5598
    Checking source file {0}
  - HAT5599
    {0} - Checking applied fix {1}
  - HAT5602
    Checking target file {0}
  - HAT5603
    Target file {0} is missing and cannot be replaced
  - HAT5604
    Directory {0} is missing
  - HAT5605
    Existing file {0} will be replaced
  - HAT5606
    Target file {0} is missing and cannot be removed
  - HAT5607
    Target file {0} is missing and cannot be restored
  - HAT5611
    File {0} was previously backed up
  - HAT5612
    Checking backup file {0}
  - HAT5613
    Backup file {0} is missing
  - HAT5614
    Target file {0} is missing and will be created.
  - HAT5615
    Write access is permitted for target {0}.
  - HAT5616
    Read access is permitted for {0}
  - HAT5617
    Source file {0}
  - HAT5618
    Target file {0}
  - HAT5619
    Creating directory {0}
  - HAT5620
    Existing target file {0} will be backed up
  - HAT5621
    Backing up file {0}
  - HAT5623
    Applying new file {0}
  - HAT5624
    Removing old file {0}
  - HAT5627
    File {0} was previously restored
  - HAT5628
    Restoring original file {0}
  - HAT5629
    {0} cannot be restored because it has been committed
  - HAT5630
    {0} cannot be restored because it has not been applied
  - HAT5635
    {0} has concurrent {1} fix requirements - see the readme file
  - HAT5641
    {0} has already been committed
  - HAT5642
    {0} must be committed before a new fix can be applied
  - HAT5643
    {0} for build {1} cannot be applied to build {2}
  - HAT5644
    {0} for build {1} cannot be applied to build {2}
  - HAT5645
    The request was successful
  - HAT5646
    The request was not successful
  - HAT5647
    The final return code is {0}
  - HAT5648
    Log file {0} contains 1 additional message.
  - HAT5649
    Log file {0} contains {1} additional messages.
  - HAT5653
    System Information {0} {1}
  - HAT5654
    Today is {0}
  - HAT5655
    Fix type {0} is not a CAPAR or APAR
  - HAT5656
    Unable to construct the XML image {0}
  - HAT5657
    Unexpected xerces exception {0}
  - HAT5658
    Unexpected exception {0}
  - HAT5659
    Internal program problem {0}
  - HAT5700
    User Parameter {0} {1}
  - HAT5703
    Checking {0} root {1}
  - HAT5704
    Unable to locate {0} root {1}
  - HAT5705
    {0} root located {1}
  - HAT5706
    {0} product not found
  - HAT5708
    {0} not found.
  - HAT5710
    {0} located {1}
  - HAT5711
    Fix file not found {0}
  - HAT5712
    Unknown action {0}
  - HAT5713
    Extracting fix {0} ...
  - HAT5714
    Extracting the fix control file {0}
  - HAT5715
    Fix control file {0} is missing
  - HAT5716
    Extracting the fix data files
  - HAT5745
    {0} can not be applied until previous maintenance is applied to your HATS projects. See the readme for information on applying maintenance to your HATS projects.
  - HPS5747E
    Unable to copy application configuration files
  - HPS5748E
    Security Exception {0}
  - HPS5750E
    Arguments are {0}
  - HPS5901
    Exception occurred attempting to create or activate the HATS EJB
  - HPS5902
    Exception occurred while processing the EJB Properties input argument
  - HPS5903
    Exception occurred while processing the EJB Helper object
  - HPS5904
    Exception occurred invoking the EJB Helper object
  - HPS5905
    Exception occurred attempting to invoke ConnMgr to cleanup a connection
  - HPS5950
    {0}: {1}: {2}: HPubEJB2_Reference={3}, JNDI_NAME={4}, PROVIDER_URL={5}, INITIAL_CONTEXT_FACTORY={6}
  - HPS5951
    {0}: accessHandle==null || hPubLinkKey==null
  - HPS5952
    {0}: getEJBObject(): {2}: {3}
  - HPS5953
    {0}: processIO({1}): {2}: {3}
  - HPS5954
    {0}: HPubEJB.remove(), ejb={1}: {2}: {3}
  - HPS5955
    {0}: ejb.getHandle(), ejb={1}: {2}: {3}
  - HPS5956
    {0}: HttpServletRequest.getSession(true), hPubLinkKey={2}
  - HPS6002
    Conn exception while releasing session to the Session Manager
  - HPS6003
    Unable to acquire connection from the Session Manager
  - HPS6004
    Exception while invoking a property's read method
  - HPS6005
    Internal processing error
  - HPS6006
    Introspection exception
  - HPS6007
    Connection Link Key is null when trying to acquire a chained non-web connection
  - HPS6008
    Connection Link Key is null when trying to release a chained non-web connection
  - HPS6009
    Unexpected exception: {exception text}
  - HPS6100
    Unable to acquire session from the Session Manager
  - HPS6101
    Internal HOD macro processing error
  - HPS6102
    Internal macro processing error, extraction coordinates out of bounds
  - HPS6103
    Internal macro processing error, macro empty
  - HPS6105
    Received unexpected interrupted exception while waiting
  - HPS6106
    Unable to communicate with the Session Manager
  - HPS6107
    Illegal access exception while invoking a property's read method
  - HPS6108
    Invocation target exception while invoking a property's read method
  - HPS6109
    Exception occurred, cannot retrieve current screen
  - HPS6112
    Received the following MacroErrorEvent while playing Host On-Demand macro: {0}
  - HPS6202
    Internal error: Unable to locate read method for property
  - HPS6203
    Internal error: Unable to locate marker for end-of-input-variable in SQL statement
  - HPS6204
    Internal error: Unable to locate ForSQL read method for property
  - HPS6205
    SQL error while opening statement
  - HPS6209
    SQL error while executing SQL statement: {0}
  - HPS6210
    Numeric input values cannot be blank. Enter a value for all numeric input fields
  - HPS7001
    Unexpected exception {0}.
- Notices
Advanced Macro Guide
Troubleshooting
IBM i, System z, and UNIX platform-specific information
FAQs
HATS API References (Javadoc)
Configure DCAS for Web Express Logon
HATS Tuning Documentation

HPS5069

Attempt to set connection state to {0} is not valid.

This is an internal error.

Turn on HATS traces and try to re-create the condition. Contact IBM® service and provide the trace information.