Welcome
Reference information
The reference sections of the information contain reference information that you need when you use CICS® VR.
CICS® VR Messages and abend codes
This section includes the messages and abend codes that are used by CICS VR, and also includes instructions to successfully complete the recovery of CICS VSAM data.
Operator messages
Operator messages are listed sequentially and contain an explanation of how the entries are formatted.
DWW252I
ATTEMPT TO CONNECT TO CICS VR ADDRESS SPACE FAILED. ASID (IN HEX):nnnn RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc

What's new in CICS VR 6.1
CICS® VR 6.1 contains these changes.
Operating environment
CICS® VR uses logs to recover your VSAM data.
CICS VR Overview
Getting Started
CICS® VR and CICS® TS
CICS VR Exits
Running CICS® VR forward recovery
CICS® VR forward recovery consists of a restore and then forward recovery.
Running CICS® VR backup
The information in the following topics describe how to take a backup using CICS® VR. The panels and secondary windows are in the sequence that they are displayed during a backup job generation.
Running CICS® VR reorganization
You can reorganize a VSAM sphere using CICS® VR. VSAM sphere reorganization can increase the space of a sphere and its alternate indexes. It can also change the control interval sizes for a sphere's components.
Working with other VSAM sphere list pull-down menus
The CICS® VR recovery and backup functions are typically accessed using the Utilities pull-down menu after selecting VSAM spheres.
Working with CICS® Backout Failed spheres
The CICS® Backout Failed sphere list shows the CICS spheres registered for manual recovery or reorganization after CICS notification of a backout failure.
Working with logs
Using ISMF data set lists with CICS® VR
CICS® VR is integrated with ISMF so that you can create a CICS VR recovery job for the data sets in an ISMF data set list by entering the VSAMREC line operator or list command. When you enter the VSAMREC line operator or list command, the necessary CICS VR panels are called and you can create a recovery job for the VSAM sphere.
Running CICS® VR manually
IBM® recommends that you use the CICS® VR panel interface to create recovery jobs for your VSAM spheres. Using the CICS VR panel interface eliminates the need for you to manually keep track of daily update activity, logs, backups, etc. Also, the CICS VR panel interface automatically creates the recovery JCL for you.
Running CICS® VR batch backout
The CICS® VR batch backout utility allows you to remove updates that were made to KSDS, ESDS, RRDS, and VRRDS VSAM spheres by steps in a batch job. This section describes how to run the CICS VR batch backout utility.
Understanding CICS® VR reports
The CICS® VR forward recovery and batch backout utilities produce a set of reports upon successful completion. The reports are written to the data set allocated to the DWWPRINT ddname. However, the set of reports written for the forward recovery backout utilities differ from the set of reports written for the batch backout utilities.
Understanding IBM® program support
The IBM® Customer Engineering Program Support structure helps you resolve problems with IBM products, and ensures that you can make the best use of your IBM computing systems.
Problem determination procedures
If you have to contact IBM® personnel about a CICS® VR problem, you must classify and describe the problem.
Diagnosing the causes of abends
You can determine the cause of a CICS® VR abend in a number of ways.
Reference information
The reference sections of the information contain reference information that you need when you use CICS® VR.
- CICS VR command reference
  Descriptions of the CICS VR command rules and how to read the syntax diagrams.
- CICS® VR commands
  A table of descriptions of CICS® VR functions and commands used with CICS TS.
- CICS® VR Messages and abend codes
  This section includes the messages and abend codes that are used by CICS VR, and also includes instructions to successfully complete the recovery of CICS VSAM data.
  - CICS® VR messages
    Messages and their format.
  - Operator messages
    Operator messages are listed sequentially and contain an explanation of how the entries are formatted.
    - DWW007E
      SYSTEM LEVEL TOO LOW TO START CICS VR SERVER.
    - DWW007I
      SYSTEM LEVEL TOO LOW TO START CICS VR SERVER.
    - DWW008I
      CICS VR SERVER SUCCESSFULLY TERMINATED AT END OF MEMORY.
    - DWW009E
      CICS VR SERVER NOT AVAILABLE WHEN SYSTEM IN XCF LOCAL MODE.
    - DWW009I
      CICS VR SERVER NOT AVAILABLE WHEN SYSTEM IN XCF LOCAL MODE.
    - DWW009I
      CICS VR SERVER NOT AVAILABLE WHEN SYSTEM IS PARTITIONING FROM SYSPLEX.
    - DWW009E
      CICS VR SERVER NOT AVAILABLE WHEN SYSTEM IS PARTITIONING FROM SYSPLEX.
    - DWW010I
      CICS VR SERVER NOT ACTIVE. CICS VR_INIT(NO) WAS SPECIFIED.
    - DWW014I
      CICS VR SERVER ADDRESS SPACE IS NOW ACTIVE.
    - DWW015I
      CICS VR SERVER ADDRESS SPACE HAS TERMINATED AND IS RESTARTING.
    - DWW016E
      REASON CODE (HEX): rsn MODULE NAME: modulename RETURN ADDR (HEX): returnaddress
    - DWW016I
      TERMINATING ERROR DETECTED IN CICS VR SERVER ADDRESS SPACE. RETURN CODE (HEX): rc REASON CODE (HEX): rsn MODULE NAME: modulename RETURN ADDR (HEX): returnaddress
    - DWW017E
      CICS VR SERVER ADDRESS SPACE FAILED DURING INITIALIZATION. RETURN CODE (HEX): rc REASON CODE (HEX): rsn ADDITIONAL INFO (HEX): data
    - DWW017I
      CICS VR SERVER ADDRESS SPACE FAILED DURING INITIALIZATION. RETURN CODE (HEX): rc REASON CODE (HEX): rsn ADDITIONAL INFO (HEX): data
    - DWW018D
      CICS VR SERVER RESTARTED nn TIMES. REPLY RESTART <R> OR CANCEL <C>.
    - DWW019D
      INVALID RESPONSE. REPLY RESTART <R> OR CANCEL <C>.
    - DWW020I
      DISPLAY SMS,CICS VR DISPLAY SMS,CICS VR - SERVER STATUS SYSNAME: sys01 sstat ASID: asid STEP: step ... SYSNAME: sys32 sstat ASID: asid STEP: step ... DISPLAY SMS,CICS VR - JOB STATUS APPLID AND NUMBER OF JOBS USING BATCH LOGGING: SYSNAME: sys01 applid alljobs redojobs undojobs ... SYSNAME: sys32 applid alljobs redojobs undojobs DATA SET NAMING CONVENTION IN USE: SYSNAME: sys01 hlq.slq ... SYSNAME: sys32 hlq.slq UNDO LOG NAMING CONVENTION IN USE: RCD NAMING CONVENTION IN USE: prefix XCF GROUP NAMING CONVENTION IN USE: suffix SYSNAME: sys01 undoprefix ... SYSNAME: sys32 undoprefix
    - DWW020I
      DISPLAY SMS,CICS VR DISPLAY SMS,CICS VR - LOG STREAM CONNECTION STATUS SYSNAME 00000000011111111122... INDENTIFIER 12345678901234567890... logstreamname ssssssssssssssssssss... ... logstreamname ssssssssssssssssssss... ... nn SYSNAME: sys01 ... nn SYSNAME: sys32
    - DWW021E
      CICSVR SERVER REFRESH FAILED. RETURN CODE (HEX): rc REASON CODE (HEX): rsn ADDITIONAL INFO (HEX): data
    - DWW022I
      CICSVR SERVER fmid1 ( apar1 ) REFRESHED WITH fmid2 ( apar2 )
    - DWW023E
      CICSVR SERVER UNEXPECTED ERROR. RETURN CODE (HEX): rc REASON CODE (HEX): rsn ADDITIONAL INFO (HEX): data
    - DWW051I
      DFSMS CICS VR COMMAND REJECTED. CICS VR SERVER ADDRESS SPACE IS NOT ACTIVE.
    - DWW172I
      REQUEST TO TERMINATE CICS VR ADDRESS SPACE IS REJECTED: CICS VR SERVER IS WAITING FOR A REPLY TO MESSAGE DWW018D.
    - DWW172I
      REQUEST TO TERMINATE CICS VR ADDRESS SPACE IS REJECTED: CICS VR SERVER IS NOT ACTIVE.
    - DWW172I
      REQUEST TO TERMINATE CICS VR ADDRESS SPACE IS ACCEPTED: CICS VR SERVER TERMINATION SCHEDULED.
    - DWW172I
      REQUEST TO TERMINATE CICS VR ADDRESS SPACE IS REJECTED: SERVER TERMINATION IN PROGRESS.
    - DWW172I
      REQUEST TO ACTIVATE CICS VR ADDRESS SPACE IS REJECTED: CICS VR SERVER IS ACTIVE.
    - DWW180E
      UNEXPECTED ERROR DURING CICS VR SERVER PROCESSING.MODULE WHICH DETECTED THE ERROR: DWW1IRCM RETURN CODE (HEX): 00000024 REASON CODE (HEX): 711152E0 CALLED MODULE ERROR INFORMATION: RETURN CODE (HEX): 00000024 REASON CODE (HEX): 71122412 COMPLETION CODE:cc PROBLEM DESCRIPTION: CICS VR SERVER PREALLOCATION REQUIREMENTS NOT MET
    - DWW180E
      UNEXPECTED ERROR DURING CICS VR SERVER PROCESSING. MODULE WHICH DETECTED THE ERROR: modulename RETURN CODE (HEX): rc REASON CODE (HEX): rsnc CALLED MODULE ERROR INFORMATION: RETURN CODE (HEX): crc REASON CODE (HEX): crsnc PROBLEM DESCRIPTION: text
    - DWW190E
      CICS VR IS NOT LICENSED FOR USE ON THE SYSTEM.
    - DWW190I
      CICS VR IS NOT LICENSED FOR USE ON THE SYSTEM.
    - DWW204E
      CICS VR DATA SET NAMING CONVENTION NOT SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname - INVALID VALUE DETECTED. INVALID VALUE: prefix
    - DWW204I
      CICS VR DATA SET NAMING CONVENTION SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname. CURRENT VALUE: nnnnnnnn.nnnnnnnn
    - DWW204I
      CICS VR DATA SET NAMING CONVENTION NOT CHANGED ON SYSTEM: systemname - INVALID VALUE SPECIFIED. CURRENT VALUE: nnnnnnnn.nnnnnnnn
    - DWW204I
      CICS VR DATA SET NAMING CONVENTION NOT CHANGED ON SYSTEM: systemname - SAME VALUE SPECIFIED. CURRENT VALUE: nnnnnnnn.nnnnnnnn
    - DWW204I
      CICS VR DATA SET NAMING CONVENTION CHANGED ON SYSTEM: systemname. OLD VALUE: nnnnnnnn.nnnnnnnn NEW VALUE: nnnnnnnn.nnnnnnnn
    - DWW204I
      CICS VR DATA SET NAMING CONVENTION NOT SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname
    - DWW205E
      CICS VR RCDS NAMING CONVENTION NOT SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname - INVALID VALUE DETECTED. INVALID VALUE: prefix
    - DWW205I
      CICS VR RCDS NAMING CONVENTION NOT SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname
    - DWW205I
      CICS VR RCDS NAMING CONVENTION SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname CURRENT VALUE: prefix
    - DWW205I
      CICS VR RCDS NAMING CONVENTION NOT CHANGED ON SYSTEM: systemname - INVALID VALUE SPECIFIED. CURRENT VALUE: prefix
    - DWW205I
      CICS VR RCDS NAMING CONVENTION NOT CHANGED ON SYSTEM: systemname - SAME VALUE SPECIFIED. CURRENT VALUE: prefix
    - DWW205I
      CICS VR RCDS NAMING CONVENTION CHANGED ON SYSTEM: systemname OLD VALUE: oldprefix NEW VALUE: newprefix
    - DWW206E
      CICS VR XCF GROUP NAMING CONVENTION NOT SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname - INVALID VALUE DETECTED. INVALID VALUE: suffix
    - DWW206I
      CICS VR XCF GROUP NAMING CONVENTION NOT SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname
    - DWW206I
      CICS VR XCF GROUP NAMING CONVENTION SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname CURRENT VALUE: suffix
    - DWW206I
      CICS VR XCF GROUP NAMING CONVENTION NOT CHANGED ON SYSTEM: systemname - INVALID VALUE SPECIFIED. CURRENT VALUE: suffix
    - DWW206I
      CICS VR XCF GROUP NAMING CONVENTION NOT CHANGED ON SYSTEM: systemname - SAME VALUE SPECIFIED. CURRENT VALUE: suffix
    - DWW206I
      CICS VR XCF GROUP NAMING CONVENTION CHANGED ON. SYSTEM: systemname OLD VALUE: oldsuffix NEW VALUE: newsuffix
    - DWW207E
      CICS VR UNDO LOG NAMING CONVENTION NOT SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname - INVALID VALUE DETECTED. NVALID VALUE: prefix
    - DWW207I
      CICS VR UNDO LOG NAMING CONVENTION NOT SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname
    - DWW207I
      CICS VR UNDO LOG NAMING CONVENTION SET DURING CICS VR ADDRESS SPACE INITIALIZATION ON SYSTEM: systemname CURRENT VALUE: prefix
    - DWW207I
      CICS VR UNDO LOG NAMING CONVENTION NOT CHANGED ON SYSTEM: systemname - INVALID VALUE SPECIFIED. CURRENT VALUE: prefix
    - DWW207I
      CICS VR UNDO LOG NAMING CONVENTION NOT CHANGED ON SYSTEM: systemname - SAME VALUE SPECIFIED. CURRENT VALUE: prefix
    - DWW207I
      CICS VR UNDO LOG NAMING CONVENTION CHANGED ON SYSTEM: systemname . OLD VALUE: oldprefix. NEW VALUE: newprefix
    - DWW210I
      CICS VR INVENTORY SCAVENGER STARTING ON SYSTEM: systemname
    - DWW210I
      CICS VR INVENTORY SCAVENGER STARTED ON SYSTEM: systemname
    - DWW210I
      CICS VR HISTORY SCAVENGER STARTED ON SYSTEM: systemname
    - DWW210I
      CICS VR HISTORY SCAVENGER FINISHED ON SYSTEM: systemname
    - DWW220I
      CICS VR taskname. SERVICE REQUEST IS REJECTED - INVALID REQUEST.MODULE WHICH DETECTED THE ERROR: modulename. RETURN CODE (HEX): rc. REASON CODE (HEX): rsnc. PROBLEM DETERMINATION DATA (HEX): data. CALLED MODULE ERROR INFORMATION: RETURN CODE (HEX): crc. REASON CODE (HEX): crsnc. PROBLEM DESCRIPTION: text.
    - DWW220I
      CICS VR taskname SERVICE REQUEST IS REJECTED - INCOMPLETE REQUEST. MODULE WHICH DETECTED THE ERROR: modulename. RETURN CODE (HEX): rc. REASON CODE (HEX): rsnc. PROBLEM DETERMINATION DATA (HEX): data. CALLED MODULE ERROR INFORMATION: RETURN CODE (HEX): crc. REASON CODE (HEX): crsnc PROBLEM DESCRIPTION: text.
    - DWW220I
      CICS VR taskname SERVICE REQUEST IS REJECTED - UNEXPECTED ERROR. MODULE WHICH DETECTED THE ERROR: modulename. RETURN CODE (HEX): rc. REASON CODE (HEX): rsnc. PROBLEM DETERMINATION DATA (HEX): data. CALLED MODULE ERROR INFORMATION: RETURN CODE (HEX): crc. REASON CODE (HEX): crsnc. PROBLEM DESCRIPTION: text
    - DWW240I
      CICS VR ADDRESS SPACE HAS SUCCESSFULLY CONNECTED TO XCF. GROUP groupname. ON SYSTEM: systemname.
    - DWW245I
      APPLICATION IDENTIFIER applid SET FOR CICS VR ADDRESS SPACE ON SYSTEM: systemname
    - DWW246I
      APPLICATION application ( jobname) SUCCESSFULLY RAN.
    - DWW246I
      APPLICATION application ( jobname ) HAS BEEN CANCELED.
    - DWW246I
      REQUEST TO RUN APPLICATION application ( jobname ) HAS BEEN RECEIVED.
    - DWW246I
      REQUEST TO RUN APPLICATION application ( jobname ) HAS BEEN ACCEPTED.
    - DWW246I
      REQUEST TO RUN APPLICATION application ( jobname ) HAS BEEN REJECTED. RETURN CODE (HEX): rc REASON CODE (HEX): rsn PROBLEM DESCRIPTION: error
    - DWW246I
      REQUEST TO CANCEL APPLICATION application ( jobname ) HAS BEEN RECEIVED.
    - DWW246I
      REQUEST TO CANCEL APPLICATION application ( jobname ) HAS BEEN ACCEPTED.
    - DWW246I
      REQUEST TO CANCEL APPLICATION application ( jobname ) HAS BEEN REJECTED. RETURN CODE (HEX): rc REASON CODE (HEX): rsn PROBLEM DESCRIPTION: error
    - DWW250I
      CALLER IS NOT AUTHORIZED
    - DWW251I
      BUILDING OF VSAM CONTROL BLOCK FAILED. RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW252I
      ATTEMPT TO CONNECT TO CICS VR ADDRESS SPACE FAILED. ASID (IN HEX):nnnn RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW253I
      ATTEMPT TO GET MAIN SPACE FAILED
    - DWW254I
      INVALID VSAM FUNCTION SPECIFIED. RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW255I
      INVALID VSAM BATCH LOGGING TOKEN DETECTED
    - DWW256I
      INVALID RPL DETECTED. SPHERE NAME: VSAM_sphere_name
    - DWW257I
      USER ATTEMPTING TO WRITE TO LOG WITH MRKBFR BIT SET.SPHERE NAME: VSAM_sphere_name
    - DWW258I
      USER ATTEMPTING TO WRITE TO LOG WITH CIMODE BIT SET. SPHERE NAME: VSAM_sphere_name
    - DWW259I
      LOGGING NOT PERFORMED FOR ADDRESS SPACE. ASID (IN HEX): nnnn RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW260I
      INVALID REDO LOG RECORD TYPE SPECIFIED FOR cccc LOGGING. SPHERE NAME: VSAM_sphere_name RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW261I
      GET BLOCK REQUEST FAILED
    - DWW262I
      UNEXPECTED ERROR DURING VSAM BATCH LOGGING. ASID (IN HEX): nnnn
    - DWW263I
      NO cccc LOGGING REQUESTED. ASID (IN HEX): nnnn RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW264I
      VSAM BATCH cccc LOGGING COMPLETED SUCCESSFULLY. ASID (IN HEX): nnnn RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW265I
      VSAM BATCH UNDO LOGGING TERMINATED. ASID (IN HEX): nnnn RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW266I
      INVALID VSAM BATCH LOGGING TYPE SPECIFIED. LOGGING TYPE: cccc RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW267I
      VSAM BATCH REDO LOGGING FAILED. ASID (IN HEX): nnnn RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc
    - DWW268I
      VSAM BATCH UNDO LOGGING FAILED. ASID (IN HEX): nnnn. RETURN CODE (IN HEX): rc. REASON CODE (IN HEX): rsnc.
    - DWW269I
      BATCH LOGGING REQUESTED: type SPHERE spherename REDOS rrrr UNDOS uuuu
    - DWW280I
      CICS VR FAILED PROCESSING BATCH LOGGING REQUEST: (CONNECT | WRITE | DISCONNECT | UNDETERMINED). FROM ASID asid JOB jobname STEP stepname FOR SPHERE dsname LOG STREAM logstream. RETURN CODE (HEX): rc REASON CODE (HEX): rsnc PROBLEM DETERMINATION: probdet RETURN CODE (HEX): crc REASON CODE (HEX): crsnc
    - DWW281I
      CICS VR LOGGER IS DISABLED. BATCH LOGGING REQUEST REJECTED. ASID asid JOB jobname STEP stepname FOR SPHERE dsname.
    - DWW282I
      MAXIMUM POOL SIZE REACHED IN LSQA STORAGE
    - DWW283I
      GETMAIN FAILURE. RC: rc. RSN: rsnc.
    - DWW284I
      PAUSE FAILED. RC: rc. RSN: rsnc.
    - DWW285I
      nnnn BLOCK NOT FOUND. MODULE RSN CODE: rsnc
    - DWW286I
      ERROR OCCURRED DURING RELEASE DWWL2HSF: RELEASE RC: rc. PAUS BLOCK ADDR: pbaddr. RELEASE PET: rpet DWWL2HSF: JOB NAME: jobname. STEP NAME: stepname. VSAM SPHERE: dsname
    - DWW300S
      THIS IS THE CICS® VR xxx BETA THAT EXPIRES ON dd/mm/yyyy
    - DWW301I
      CICSVR MESSAGE DATA SET IS FULL - hlq.slq.DWWMSGx.systemname
    - DWW302I
      CICSVR NOW RECORDING MESSAGES ON hlq.slq.DWWMSGx.systemname
    - DWW303I
      CICSVR ddddddd DATA SET IS FULL. IT IS WRAPPED
    - DWW400I
      logtype CONNECT DONE FOR JOB jobname, JOBID jobid, DSN dsn, LOGSTREAM ls
    - DWW401I
      logtype DISCONNECT DONE FOR JOB jobname, JOBID jobid, DSN dsn, LOGSTREAM ls
    - DWW500I
      RCDS RCDS_name (dsname)IS status. [DYNALLOC RETURN CODE (HEX): dynrc] [DYNALLOC ERROR REASON CODE (HEX): dynerrrsn] [DYNALLOC INFORMATION REASON CODE (HEX): dyninforsn] [ABEND SYSTEM COMPLETION CODE (HEX): abendsystemcc] [ABEND USER COMPLETION CODE (HEX): abendusercc] [ABEND REASON CODE (HEX): abendrsn] [DIV RETURN CODE (HEX): divrc] [DIV REASON CODE (HEX): divrsn]
    - DWW505I
      REQUEST TO ADD RCDS RCDS_name HAS BEEN RECEIVED. REQUESTER: requester CAUSE: cause
    - DWW505I
      REQUEST TO ADD RCDS RCDS_name IS REJECTED - INVALID NAME SPECIFIED.
    - DWW505I
      REQUEST TO ADD RCDS RCDS_name (dsname) IS REJECTED - INVALID DATA SET NAME DETECTED.
    - DWW505I
      REQUEST TO ADD RCDS RCDS_name (dsname) IS REJECTED - UNEXPECTED RESULT DETECTED ON A SYSTEM. RESULT: result
    - DWW505I
      REQUEST TO ADD RCDS RCDS_name (dsname) IS REJECTED - UNEXPECTED RESULT DETECTED ON THE SYSTEM. RESULT: result
    - DWW505I
      REQUEST TO ADD RCDS RCDS_name IS REJECTED - INVALID NAME DETECTED ON A SYSTEM. EXECUTOR: executor
    - DWW505I
      REQUEST TO ADD RCDS RCDS_name (dsname) IS REJECTED - INVALID DATA SET NAME DETECTED ON A SYSTEM. EXECUTOR: executor
    - DWW505I
      REQUEST TO ADD RCDS RCDS_name (dsname) IS REJECTED - UNEXPECTED RESULT DETECTED ON A SYSTEM. EXECUTOR: executor RESULT: result
    - DWW505I
      REQUEST TO ADD RCDS RCDS_name (dsname) IS REJECTED - UNEXPECTED ERROR DETECTED ON THE SYSTEM. EXECUTOR: executor COMPLETION CODE: cc
    - DWW0506S
      A backout-failed end indicator is missing. The base cluster to back out is dddd.
    - DWW506I
      RCDS RCDS_name (dsname) ADDED.
    - DWW506I
      RCDS RCDS_name (dsname) ADDED ON A SYSTEM. EXECUTOR: executor
    - DWW506I
      RCDS RCDS_name (dsname) ADDED ON THE SYSTEM. EXECUTOR: executor
    - DWW507I
      RCDS RCDS_name (dsname) ALREADY ADDED.
    - DWW507I
      RCDS RCDS_name (dsname) ALREADY ADDED ON A SYSTEM. EXECUTOR: executor
    - DWW507I
      RCDS RCDS_name (dsname) ALREADY ADDED ON THE SYSTEM. EXECUTOR: executor
    - DWW509I
      RCDS RCDS_name (dsname) NOT ADDED.
    - DWW509I
      RCDS RCDS_name (dsname) NOT ADDED ON A SYSTEM. EXECUTOR: executor CAUSE: cause
    - DWW509I
      RCDS RCDS_name (dsname) NOT ADDED ON THE SYSTEM - THE RCDS IS status. EXECUTOR: executor [DYNALLOC RETURN CODE (HEX): dynrc] [DYNALLOC ERROR REASON CODE (HEX): dynerrrsn] [DYNALLOC INFORMATION REASON CODE (HEX): dyninforsn] [ABEND SYSTEM COMPLETION CODE (HEX): abendsystemcc] [ABEND USER COMPLETION CODE (HEX): abendusercc] [ABEND REASON CODE (HEX): abendrsn] [DIV RETURN CODE (HEX): divrc] [DIV REASON CODE (HEX): divrsn]
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name HAS BEEN RECEIVED. REQUESTER: requester CAUSE: cause
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name IS REJECTED - INVALID NAME SPECIFIED.
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name (dsname) IS REJECTED - INVALID DATA SET NAME DETECTED.
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name (dsname) IS REJECTED - WOULD RESULT IN LESS THAN MINIMUM NUMBER OF IN USE RCDS.
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name (dsname) IS REJECTED - UNEXPECTED RESULT DETECTED ON A SYSTEM. RESULT: result
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name (dsname) IS REJECTED - UNEXPECTED RESULT DETECTED ON THE SYSTEM. RESULT: result
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name IS REJECTED - INVALID NAME DETECTED ON A SYSTEM. EXECUTOR: executor
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name (dsname) IS REJECTED - INVALID DATA SET NAME DETECTED ON A SYSTEM. EXECUTOR: executor
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name (dsname) IS REJECTED - WOULD RESULT IN LESS THAN MINIMUM NUMBER OF IN USE RCDS ON A SYSTEM. EXECUTOR: executor
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name (dsname) IS REJECTED - UNEXPECTED RESULT DETECTED ON A SYSTEM. EXECUTOR: executor RESULT: result
    - DWW510I
      REQUEST TO DELETE RCDS RCDS_name (dsname) IS REJECTED - UNEXPECTED ERROR DETECTED ON THE SYSTEM. EXECUTOR: executor COMPLETION CODE: cc
    - DWW511I
      RCDS RCDS_name (dsname) DELETED.
    - DWW511I
      RCDS RCDS_name (dsname) DELETED ON A SYSTEM. EXECUTOR: executor
    - DWW511I
      RCDS RCDS_name (dsname) DELETED ON THE SYSTEM. EXECUTOR: executor
    - DWW512I
      RCDS RCDS_name (dsname) ALREADY DELETED.
    - DWW512I
      RCDS RCDS_name (dsname) ALREADY DELETED ON A SYSTEM. EXECUTOR: executor
    - DWW512I
      RCDS RCDS_name (dsname) ALREADY DELETED ON THE SYSTEM. EXECUTOR: executor
    - DWW514I
      RCDS RCDS_name (dsname) NOT DELETED.
    - DWW514I
      RCDS RCDS_name (dsname) NOT DELETED ON A SYSTEM. EXECUTOR: executor CAUSE: cause
    - DWW514I
      RCDS RCDS_name (dsname) NOT DELETED ON THE SYSTEM - THE RCDS IS status. EXECUTOR: executor [DYNALLOC RETURN CODE (HEX): dynrc] [DYNALLOC ERROR REASON CODE (HEX): dynerrrsn] [DYNALLOC INFORMATION REASON CODE (HEX): dyninforsn]
    - DWW520I
      REQUEST TO DISPLAY RCDS STATUS HAS BEEN RECEIVED. REQUESTER: requester CAUSE: cause
    - DWW520I
      DISPLAY SMS,CICS VR,RCDS. DISPLAY SMS,CICS VR,RCDS-DATA SET NAMES NAME DATA SET NAME identifier dsname ... identifier dsname DISPLAY SMS,CICS VR,RCDS - STATUS NAME STATUS identifier status ... identifier status DISPLAY SMS,CICS VR,RCDS - SPACE NAME TOTAL USED UNIT identifier total used unit ... identifier total used unit
    - DWW530I
      REQUEST TO QUERY STATE OF RCDS RCDS_name (dsname) SUCCESSFULLY COMPLETED ON THE SYSTEM. EXECUTOR: executor
    - DWW530I
      REQUEST TO QUERY STATE OF RCDS RCDS_name (dsname) NOT EXECUTED - THE RCDS IS NOT IN USE ON THE SYSTEM. EXECUTOR: executor
    - DWW530I
      REQUEST TO QUERY STATE OF RCDS RCDS_name (dsname) FAILED - error ERROR DETECTED ON THE SYSTEM. EXECUTOR: executor [SHOWCAT RETURN CODE (HEX): showcatrc] [CATALOG RETURN CODE (HEX): catalogrc] [CATALOG PROBLEM CODE (HEX): catalogprob]
    - DWW530I
      REQUEST TO QUERY RCDS STATE FAILED - UNEXPECTED ERROR DETECTED ON THE SYSTEM. EXECUTOR: executor COMPLETION CODE: cc
    - DWW540I
      n RCDS ARE IN USE, NO ACTION REQUIRED.
    - DWW541W
      n RCDS ARE IN USE, EVENTUAL ACTION REQUIRED.
    - DWW542A
      1 RCDS IS IN USE, IMMEDIATE ACTION REQUIRED.
    - DWW569S
      The Data-In-Virtual (DIV) Access service for data set dddd failed. The return code is rc and the reason code is rs.
    - DWW570S
      The Data-In-Virtual (DIV) Map service for data set dddd failed. The return code is rc and the reason code is rs.
    - DWW590E
      CICS VR CONTROL SERVICE REQUEST IS REJECTED. CONTROL FUNCTION: function CONTROL STRING: string ERROR POSITION: mark ERROR DESCRIPTION: error
    - DWW590E
      CICS VR CONTROL SERVICE REQUEST IS TERMINATED. CONTROL FUNCTION: function CONTROL STRING: string ERROR DESCRIPTION: error
    - DWW590I
      CICS VR CONTROL SERVICE REQUEST IS ACCEPTED. CONTROL FUNCTION: function CONTROL STRING: string STATE DESCRIPTION: state
    - DWW590I
      CICS VR CONTROL SERVICE REQUEST IS REJECTED. CONTROL FUNCTION: function CONTROL STRING: string ERROR POSITION: mark ERROR DESCRIPTION: error
    - DWW590I
      CICS VR CONTROL SERVICE REQUEST IS COMPLETED. CONTROL FUNCTION: function CONTROL STRING: string STATE DESCRIPTION: state
    - DWW590I
      CICS VR CONTROL SERVICE REQUEST IS TERMINATED. CONTROL FUNCTION: function CONTROL STRING: string ERROR DESCRIPTION: error
    - DWW590I
      CICS VR CONTROL SERVICE REQUEST IS INCOMPLETE. CONTROL FUNCTION: function CONTROL STRING: string STATE DESCRIPTION: state
    - DWW591I
      DISPLAY CONTROL. DISPLAY CONTROL - UNDO LOGGING CONTROL STRINGS SYSNAME: sys01 undologstring ... SYSNAME: sysnn undologstring DISPLAY CONTROL - BATCH BACKOUT CONTROL STRINGS SYSNAME: sys01 backoutstring ... SYSNAME: sysnnbackoutstring DISPLAY CONTROL - GENERAL CONTROL STRINGS SYSNAME: sys01generalstring ... SYSNAME: sysnngeneralstring
    - DWW599I
      DISPLAY CONTROL DEFAULTS. CONTROL DEFAULTS NAME VALUE SCOPE OWNER name value scope owner ... ... ... name value scope owner
    - DWW601I
      CICS REQUEST FOR FORWARD RECOVERY OF VSAM DATA SET AFTER BACKOUT FAILURE HAS BEEN ACCEPTED BY CICS VR. THE DATA SET NAME IS: DataSetName
    - DWW601I
      CICS REQUEST FOR REORGANIZATION OF VSAM DATA SET AFTER BACKOUT FAILURE HAS BEEN ACCEPTED BY CICS VR. THE DATA SET NAME IS: DataSetName
    - DWW602I
      CICS REQUEST FOR FORWARD RECOVERY OF VSAM DATA SET AFTER BACKOUT FAILURE NOT ACCEPTED. CICS VR ADDRESS SPACE IS NOT ACTIVE. THE DATA SET NAME IS: DataSetName
    - DWW602I
      CICS REQUEST FOR REORGANIZATION OF VSAM DATA SET AFTER BACKOUT FAILURE NOT ACCEPTED. CICS VR ADDRESS SPACE IS NOT ACTIVE. THE DATA SET NAME IS: DataSetName
    - DWW602I
      CICS REQUEST FOR FORWARD RECOVERY OF VSAM DATA SET AFTER BACKOUT FAILURE NOT ACCEPTED. CICS VR INTERNAL ERROR HAS OCCURRED. THE DATA SET NAME IS: DataSetName
    - DWW602I
      CICS REQUEST FOR REORGANIZATION OF VSAM DATA SET AFTER BACKOUT FAILURE NOT ACCEPTED. CICS VR INTERNAL ERROR HAS OCCURRED. THE DATA SET NAME IS: DataSetName
    - DWW603I
      CICS VR ATTEMPTED TO PERFORM FORWARD RECOVERY OR REORGANIZATION OF VSAM DATA SET BY CICS REQUEST AFTER BACKOUT FAILURE. THE ATTEMPT WAS NOT SUCCESSFUL. THE DATA SET WAS NOT FOUND. THE BACKOUT FAILURE STILL REGISTERED IN CICS VR. THE DATA SET NAME IS: DataSetName
    - DWW603I
      CICS VR ATTEMPTED TO PERFORM FORWARD RECOVERY OR REORGANIZATION OF VSAM DATA SET BY CICS REQUEST AFTER BACKOUT FAILURE. THE ATTEMPT WAS NOT SUCCESSFUL. THE DATA SET IS LEFT AVAILABLE TO CICS, AND THE BACKOUT FAILURE STILL REGISTERED IN CICS VR. THE DATA SET NAME IS: DataSetName
    - DWW603I
      CICS VR ATTEMPTED TO PERFORM FORWARD RECOVERY OR REORGANIZATION OF VSAM DATA SET BY CICS REQUEST AFTER BACKOUT FAILURE. THE ATTEMPT WAS NOT SUCCESSFUL. THE DATA SET IS UNAVAILABLE TO CICS, AND THE BACKOUT FAILURE STILL REGISTERED IN CICS VR. THE DATA SET NAME IS: DataSetName
    - DWW604I
      CICS VR ATTEMPTED TO PERFORM FORWARD RECOVERY OR REORGANIZATION OF VSAM DATA SET BY CICS REQUEST AFTER BACKOUT FAILURE. THE ATTEMPT WAS SUCCESSFUL, BUT THE DATA SET IS LEFT UNAVAILABLE TO CICS, AND THE BACKOUT FAILURE STILL REGISTERED IN CICS VR. THE DATA SET NAME IS: DataSetName
    - DWW604I
      CICS VR ATTEMPTED TO PERFORM FORWARD RECOVERY OR REORGANIZATION OF VSAM DATA SET BY CICS REQUEST AFTER BACKOUT FAILURE. THE ATTEMPT WAS SUCCESSFUL. THE DATA SET IS AVAILABLE TO CICS, BUT THE BACKOUT FAILURE STILL REGISTERED IN CICS VR. THE DATA SET NAME IS: DataSetName
    - DWW605I
      VSAM DATA SET IN RLS MODE HAS BEEN MADE UNAVAILABLE AND QUIESCED BY CICS VR REQUEST ATTEMPTING FORWARD RECOVERY OR REORGANIZATION. THE DATA SET NAME IS: DataSetName
    - DWW605I
      VSAM DATA SET IN NON-RLS MODE HAS BEEN MADE UNAVAILABLE WITH ALL CICS FILES CLOSED BY CICS VR REQUEST ATTEMPTING FORWARD RECOVERY OR REORGANIZATION. THE DATA SET NAME IS: DataSetName
    - DWW605I
      VSAM DATA SET HAS BEEN MADE UNAVAILABLE TO CICS AND QUIESCED BY CICS VR REQUEST ATTEMPTING NON-BWO BACKUP. THE DATA SET NAME IS: DataSetName
    - DWW606I
      VSAM DATA SET IN RLS MODE HAS BEEN UNQUIESCED AND MADE AVAILABLE BY CICS VR REQUEST AFTER SUCCESSFUL FORWARD RECOVERY OR REORGANIZATION. THE DATA SET NAME IS: DataSetName
    - DWW606I
      VSAM DATA SET IN NON-RLS MODE HAS BEEN MADE AVAILABLE WITH ALL CICS FILES ENABLED BY CICS VR REQUEST AFTER SUCCESSFUL FORWARD RECOVERY OR REORGANIZATION. THE DATA SET NAME IS: DataSetName
    - DWW606I
      VSAM DATA SET HAS BEEN MADE AVAILABLE TO CICS AND UNQUIESCED BY CICS VR REQUEST AFTER SUCCESSFUL NON-BWO BACKUP. THE DATA SET NAME IS: DataSetName
    - DWW607I
      CICS VR ATTEMPTED TO PERFORM NON-BWO BACKUP OF VSAM DATA SET. THE ATTEMPT WAS NOT SUCCESSFUL. THE DATA SET IS UNAVAILABLE TO CICS. THE DATA SET NAME IS: DataSetName
    - DWW607I
      CICS VR ATTEMPTED TO PERFORM NON-BWO BACKUP OF A VSAM DATA SET. DATA SET NAME NOT FOUND IN CICS. THE DATA SET NAME IS: DataSetName
    - DWW607I
      CICS VR ATTEMPTED TO PERFORM NON-BWO BACKUP OF VSAM DATA SET. THE ATTEMPT WAS NOT SUCCESSFUL. THE STATE OF THE DATA SET IN CICS WAS NOT CHANGED. THE DATA SET NAME IS: DataSetName
    - DWW608I
      CICS VR ATTEMPTED TO PERFORM NON-BWO BACKUP OF VSAM DATA SET. THE ATTEMPT WAS SUCCESSFUL, BUT THE DATA SET IS LEFT UNAVAILABLE TO CICS. THE DATA SET NAME IS: DataSetName
    - DWW608I
      CICS VR ATTEMPTED TO PERFORM NON-BWO BACKUP OF VSAM DATA SET. THE ATTEMPT WAS SUCCESSFUL. DATA SET NOT FOUND IN CICS. THE DATA SET NAME IS: DataSetName
    - DWW609I
      CICS VR XFCBFAIL GLOBAL USER EXIT PROGRAM FAILED. LAST EXEC CICS RESPONSE: ResponseData
    - DWW610I
      CICS VR EXCI LINK TO CICS FAILED. REASON: ResponseData
    - DWW611I
      CICS REQUEST FOR FORWARD RECOVERY OF VSAM DATA SET AFTER BACKOUT FAILURE HAS BEEN REGISTERED IN THE CICS VR RCDS. USE CICS VR ISPF DIALOG TO BUILD FORWARD RECOVERY JOB. THE DATA SET NAME IS: DataSetName
    - DWW611I
      CICS REQUEST FOR REORGANIZATION OF VSAM DATA SET AFTER BACKOUT FAILURE HAS BEEN REGISTERED IN THE CICS VR RCDS. USE CICS VR ISPF DIALOG TO BUILD REORGANIZATION JOB. THE DATA SET NAME IS: DataSetName
    - DWW620I
      CICS® VR AUTOMATED FORWARD RECOVERY FOR CICS BACKOUT FAILURES HAS BEEN ENABLED.
    - DWW621I
      CICS® VR AUTOMATED FORWARD RECOVERY FOR CICS BACKOUT FAILURES ALREADY ENABLED. THE ENABLE REQUEST REJECTED.
    - DWW622I
      AN ATTEMPT TO ENABLE CICS® VR AFR FOR CICS BACKOUT FAILURES FAILED. THE EXIT PROGRAM COULD NOT BE LOADED.
    - DWW622I
      AN ATTEMPT TO ENABLE CICS® VR AFR FOR CICS BACKOUT FAILED. THE REQUEST IS NOT AUTHORIZED.
    - DWW622I
      AN ATTEMPT TO ENABLE CICS® VR AFR FOR CICS BACKOUT FAILURES FAILED DUE TO AN UNEXPECTED ERROR.
    - DWW623I
      CICS® HAS INITIATED A STARTUP OF CICS VR SERVER.
    - DWW625I
      CICS® VR AUTOMATED FORWARD RECOVERY FOR CICS BACKOUT FAILURES HAS BEEN DISABLED.
    - DWW625I
      CICS VR AUTOMATED FORWARD RECOVERY FOR CICS BACKOUT FAILURES HAS BEEN STOPPED. THE BF EXIT ABENDED.
    - DWW626I
      CICS VR AUTOMATED FORWARD RECOVERY FOR CICS BACKOUT FAILURES ALREADY DISABLED. THE DISABLE REQUEST REJECTED.
    - DWW627I
      AN ATTEMPT TO DISABLE CICS® VR AFR FOR CICS BACKOUT FAILURES FAILED. THE EXIT PROGRAM COULD NOT BE ACCESSED.
    - DWW627I
      AN ATTEMPT TO DISABLE CICS® VR AFR FOR CICS BACKOUT FAILURES FAILED. THE REQUEST IS NOT AUTHORIZED.
    - DWW627I
      AN ATTEMPT TO DISABLE CICS VR AFR FOR CICS BACKOUT FAILURES FAILED DUE TO UNEXPECTED ERROR.
    - DWW821I
      date time THE SYSTEM LOGGER RETURNED AN ERROR DURING IXGCONN CONNECT FOR LOG STREAM logstream. SOME DATA PREVIOUSLY WRITTEN TO THIS LOG STREAM HAS BEEN LOST. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW823I
      date time THE SYSTEM LOGGER RETURNED AN ERROR DURING IXGCONN CONNECT FOR LOG STREAM logstream. CICS VR BATCH LOGGER ATTEMPTED TO CONNECT TO A LOG STREAM MODEL, WHICH IS NOT POSSIBLE. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW829I
      date time A SEVERE ERROR (CODE X'code') HAS OCCURRED IN MODULE modname
    - DWW838I
      date time A TEMPORARY ERROR CONDITION OCCURRED DURING SYSTEM LOGGER OPERATION {IXGCONN | IXGWRITE | IXGBRWSE | IXGDELET} {CONNECT | DISCONNECT | START | READCURSOR | READBLOCK | END | ALL | RANGE} FOR LOG STREAM logstream. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW839I
      date time AN ERROR OCCURRED DURING SYSTEM LOGGER OPERATION {IXGCONN | IXGWRITE | IXGBRWSE | IXGDELET} {CONNECT | DISCONNECT | START | READCURSOR | READBLOCK | END | ALL | RANGE} FOR FORWARD RECOVERY LOG STREAM logstream. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW840I
      date time THE SYSTEM LOGGER RETURNED AN ALERT DURING OPERATION {IXGCONN CONNECT | IXGWRITE} FOR LOG STREAM logstream. THE LOG STREAM {DATA SET DIRECTORY IS FULL | WRITER OFFLOAD TASK IS FAILING | STAGING DATA SET FAILED}. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW841I
      date time THE SYSTEM LOGGER RETURNED AN ERROR DURING OPERATION {IXGCONN CONNECT | IXGWRITE} FOR LOG STREAM logstream. {CICS VR BATCH LOGGER | THE SYSTEM LOGGER} DOES NOT HAVE AUTHORITY {TO PERFORM THIS OPERATION | TO ACCESS THE LOG STREAM STRUCTURE}. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW842I
      date time THE SYSTEM LOGGER RETURNED AN ERROR DURING OPERATION IXGCONN CONNECT FOR LOG STREAM logstream. THE LOG STREAM IS BEING DELETED BY ANOTHER PROGRAM. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW843I
      date time THE SYSTEM LOGGER RETURNED AN ERROR DURING OPERATION IXGCONN CONNECT FOR LOG STREAM logstream. THE MAXIMUM NUMBER OF LOG STREAM CONNECTIONS THAT SYSTEM LOGGER CAN SUPPORT HAS BEEN REACHED. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW844I
      date time THE SYSTEM LOGGER RETURNED AN ERROR DURING OPERATION IXGCONN CONNECT FOR LOG STREAM logstream THE SYSTEM LOGGER FAILED TO FIND A SUITABLE COUPLING FACILITY FOR THE LOG STREAM STRUCTURE. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW850I
      date time THE SYSTEM LOGGER RETURNED AN ERROR DURING OPERATION IXGCONN CONNECT FOR LOG STREAM logstream. THE LOG STREAM IS A DASD-ONLY LOG WHICH IS CONNECTED ON ANOTHER SYSTEM. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW851I
      date time THE SYSTEM LOGGER RETURNED AN ERROR DURING OPERATION IXGCONN CONNECT FOR LOG STREAM logstream. THE LOG STREAM IS A DASD-ONLY LOG WHICH IS NOT SUPPORTED BY THE CURRENT LEVEL OF SYSTEM LOGGER. SYSTEM LOGGER RETURN CODE rc REASON CODE rsnc
    - DWW999I
      CICS VR ZZVALUE SERVICE REQUEST IS REJECTED. error
    - DWW999I
      CICS VR ZZVALUE SERVICE REQUEST IS ACCEPTED.
  - CICS VR return codes and reason codes in non-CICS VR messages
    Tables of reason and return codes.
  - Service diagnostic messages
    The following messages are CICS VR service diagnostic messages for use by IBM field support personnel.
  - Abend codes
    This section explains the CICS VR abend codes, and provides instructions for you to successfully complete the recovery of your CICS® VSAM data. Each abend code is explained using the following format.
- CICS® VR ddnames
  A table that contains the ddnames for CICS® VR.
- UNDO log structure overview
  Every undo log block consists of a Block Header (MVSLogBlockHeader type), followed by log records. Every log record includes a standard General Log Header (GenLogRecord type), followed by record data.
- DWWBKNT REXX
  The REXX procedure DWWBKNT performs multiple calls of the CICS VR NOTIFY utility DWWNT for IDCAMS REPRO backups listed in the input data set. It can be used in TSO and in a batch environment.
- Customization parameters
  The table lists parameters that you can specify on the DWWCST01 panel to customize members of &HLQ.SDWWCNTL.OUT and &HLQ.SDWWSENU/SJPN.OUT data sets.
- User replaceable JCL skeleton
  You can replace the CICS® VR supplied JCL skeleton DWWUJOB with one of your own ones that satisfies your requirements.
Glossary
The terms in this glossary are defined as they pertain to the CICS VSAM Recovery documentation.
Edition notice
This is the information for CICS VSAM Recovery for z/OS. It applies to CICS VSAM Recovery for z/OS Version 6.1, and to all subsequent versions, releases, and modifications until otherwise indicated in new editions. Make sure you are using the correct edition for the level of the product.
Download PDF
Download the PDF format documentation for CICS VSAM Recovery for z/OS 6.1

DWW252I

ATTEMPT TO CONNECT TO CICS VR ADDRESS SPACE FAILED. ASID (IN HEX):nnnn RETURN CODE (IN HEX): rc REASON CODE (IN HEX): rsnc

The CICS VR VSAM Batch Logger has detected an error while attempting to connect to the CICS VR server address space. See the probdet2 field description of the associated VSAM IEX161I 002 message for details (CICS VR return and reason codes in non-CICS VR messages).

In the message text:

nnnn: The address space ID of the application.
rc: The return code.
rsn: The reason code.

CICS VR VSAM batch logging terminates. The system continues processing.

Check that the log stream ID for the sphere is correct, the system logger is active, no parallel updates for the sphere or real ddname attempted from different jobs.