OUT_ONLY_SVC_START

Required? No
Keyword Type Unsigned number
Default 0
Range 0–60000
Multiples Allowed? No, only one for each PORT_X25_SPECIFIC_DATA parameter
   OUT_ONLY_SVC_START = (
      @TYPE = UNSIGNEDNUMBERKEYWORD
      @RANGE = 0,60000
      @DEFAULT = 0
    )

The OUT_ONLY_SVC_START parameter specifies the lowest logical channel number that the data terminal equipment (DTE) can assign to an outgoing call. The value that you type in this field is the one provided by the network supplier when you subscribed to the network.

The value is an integer in the range 0–60000.

This parameter is optional. The default is 0.

The value you type in this field must match both of the following conditions:
  • The value can not be within the range defined for the two other SVCs (in-only SVCs and two-way SVCs).
  • The value must be greater than the highest two-way SVC channel number configured for this link.
Note:
You can not specify a value for this parameter unless the OUT_ONLY_SVC_COUNT parameter has a value greater than 0.