DSV (Data Set View)

Purpose
The DSV function displays the Data Set View or View Entry panel, in online mode. This function can be invoked from a REXX program or a TSO clist or entered on an ISPF Command line, but cannot be used in batch jobs as it is an interactive function.
Usage notes
When invoked from an ISPF Command line without a parameter, the Data Set View Entry panel is displayed in interactive mode and you can specify a valid data set for browsing. If you include a valid data set name as a parameter, then you bypass the Entry panel, and go directly to viewing the specified data set.

When invoked from a REXX procedure or TSO list, you must supply the data set name.

Related functions
DSB
Display Data Set Browse or Browse Entry panel
DSE
Display Data Set Edit or Edit Entry panel
DSEB
Update disk data set records
DSU
Update disk data set records
Figure 1. Syntax
(1)
Template options

1 TCIN=tcin(member)
1? OFFSETIN=(
2.1 value?,ALL
2.1 ?value,ALL,+ ,value,fieldname
1)
Copybook processing

1! LANG=AUTO
1 LANG=
2.1 COBOL
2.1 PLI
2.1 HLASM
1  %COBOL options
1  %PL/I options
1  %HLASM options
COBOL options

1! DBCS=NO
1 DBCS=YES
1! CDPC=NO
1 CDPC=YES
1! CAE=NO
1 CAE=YES
1! MIXED=NO
1 MIXED=YES
1 +  RFROMn=operand1 RTOn=operand2
1! CBLMAXRC=4
1 CBLMAXRC=num
1 CBLLIBS=(+  dsname)
8? CBLADDOP=options
Notes:
  • 1 VSAM only.
PL/I options

1! BIN63=NO
1 BIN63=YES
1! DEC31=NO
1 DEC31=YES
1! GRAPHIC=NO
1 GRAPHIC=YES
1! UNALIGNED=NO
1 UNALIGNED=YES
1! PLIMAXRC=4
1 PLIMAXRC=num
1 PLILIBS=(+  dsname)
7? PLIADDOP=options
HLASM options

1! DBCS=NO
1 DBCS=YES
1! NOALIGN=NO
1 NOALIGN=YES
1! ASMMAXRC=4
1 ASMMAXRC=num
1 ASMLIBS=(+  dsname)
5? ASMADDOP=options
DSNIN=dsname
Defines the name of the data set to be viewed. If any DD statements are specified, they are not used. The name may include a member name in parenthesis. If the member is specified here, the associated Member parameter must be empty. Must be specified when $DSV is invoked from a REXX procedure or TSO clist.

Can be omitted when DSV is entered on a command line. If specified, you bypass the Entry panel, and go directly to the Data Set View panel. When omitted, the Data Set View Entry panel is displayed in interactive mode and you can specify a valid data set for browsing.

You can further describe this data set, as follows:

MEMBER=member
The name of a single member in a PDS, or a member name pattern representing one or more members in a PDS. If the data set is a PDS, you must specify this parameter.

A member name pattern can consist of any characters that are valid in a member name and two special pattern characters: the asterisk (*) and the percent symbol (%).

*
represents any number of characters. As many asterisks as required can appear anywhere in a member name pattern. For example, if you enter a member name pattern of *d*, all members in the PDS whose name contains “d” are processed.
%
is a place holding character that means a single character. As many percent symbols as necessary can appear anywhere in a member name pattern. For example, if you enter a member name pattern of %%%%, all members in the PDS whose name is four characters in length are processed.

MEMBER=member is ignored if the data set is not a PDS.

VOLSERIN=volser
Volume serial number for a non-cataloged data set.
MQ:manager:queuename
You can specify a MQ queue in place of a data set name, where:
manager
The MQ manager to be used. If you specify a generic name, File Manager displays a list of matching managers to select from.
queuename
The queue to be used. If you specify a generic name, File Manager displays a list of matching queues to select from.
rt:applid:rname
You can specify a CICS® resource in place of a data set name, where:
rt
Resource type. Valid values are:
FI
For a CICS® file.
TD
For a Transient Data Queue.
TS
For a Temporary Storage Queue.
applid
The VTAM® applid of the CICS® system.
rname
The name of the resource.
POSITION=skip
Number of logical records to be skipped from the beginning of the data set. The default is 0.
KEY=key (VSAM only)
A key for KSDS records, or a slot number for RRDS records. The maximum key length is 30 characters. The first record with a key or slot value greater than or equal to key is the first record copied. If you omit the key and skip values, browsing begins with the first record in the data set.

If the key contains lowercase characters, blanks, or commas, enclose it in quotation marks. You can also specify a key in hexadecimal format (for example, X'C1C2C3').

TCIN=tcin(member)
PDS and member name of the copybook or template that describes the record structure of your data set.
OFFSETIN
The length of the 01 field in the template and the start locations of the fields within that 01 field are adjusted by the value provided.
value
The offset value, which must be in the range -32760 to 32760, to be applied to the corresponding field identifier. If no field identifier is supplied and ALL is not used, the value is applied to the first Level 01 field in the template.
ALL
Where the template contains multiple record structures, this keyword applies the corresponding value to all Level 01 within the template.
Note: You can specify a value for ALL and then override this value for individual layouts by providing subsequent value and fieldname combinations.
fieldname
The name of the Level 01 field to which value is to be applied. The default is the first Level 01 field in the template.
Copybook processing
If you specify a copybook (instead of an existing template), File Manager uses these processing options to compile the copybook into a template:
LANG
Determines whether File Manager automatically detects the copybook language or interprets the language as COBOL, PL/I, or HLASM.
Note: The COMPLANG setting in FMN0POPT is the equivalent of the LANG parameter in batch functions.
  • If COMPLANG is set it determines the installation default language for online and batch compilation.
  • If COMPLANG is not specified then COBOL is the installation default for online compilation and AUTO is the default for batch compilation.
  • If a value of COBOL, HLASM, PL/1, or AUTO is specified (in the Compiler Language Selection panel or through the LANG parameter in a batch job) it overrides the default language.
AUTO
Automatically detect whether the copybook language is COBOL, PL/I, or Assembler and invoke the appropriate compiler. If the compilation results in a return code greater than the maximum allowed return code for that language, and no template can be produced, then the compilation error is reported. If File Manager successfully creates a template (despite the compilation errors), then it continues processing with the template.
COBOL
Invoke the COBOL compiler to create a template from the copybook. (Do not invoke the PL/I compiler, even if the COBOL compilation results in errors.)
PLI
Invoke the PL/I compiler to create a template from the copybook. (Do not invoke the COBOL compiler, even if the PL/I compilation results in errors.)
HLASM
Invoke the HLASM compiler to create a template from the copybook.
DSINFO

Specifies whether additional data set information for input and output sources should be produced in batch reports for the DSP, DSM, DSC, and FCH commands.

NO
No additional data set information is generated.
YES
Generates data set information including DSORG, RECFM, LRECL, BLKSIZE, and VSAM attributes including average record length, maximum record length, key offset, key length and reuse, for input and output data sets when applicable.
COBOL options
The following options are used to compile a COBOL copybook into a template:
DBCS=YES
Use the DBCS compiler option.
DBCS=NO
Use the NODBCS compiler option.

For details on the effect of the DBCS and NODBCS compiler options, see the IBM COBOL Programming Guide for OS/390 & VM.

CDPC=NO
Do not use the COBOL SPECIAL-NAMES paragraph "Decimal-point is comma".
CDPC = YES
Use the COBOL SPECIAL-NAMES paragraph "Decimal-point is comma".
CAE=NO
Do not use the COBOL compile option ARITH(EXTEND).
CAE = YES
Use the COBOL compile option ARITH(EXTEND).
MIXED = NO
Field names stored in the template in uppercase.
MIXED = YES
Field names stored in the template in the original case as coded in the COBOL copybook.
RFROM1 RTO1 … RFROM5 RTO5
Up to five pairs of “From” and “To” pseudo-text character strings for the COBOL REPLACE compiler-directing statement.

If your COBOL copybooks contain characters that you want to remove or replace with other characters before compiling the copybooks into templates, then use these replacing options.

For example, if your copybooks contain colon characters (:) that you want to remove before compiling, then specify '==:==' as operand1 and '=====' as operand2.

For details on specifying “From” and “To” strings for COBOL REPLACE, see the IBM COBOL Language Reference.

CBLMAXRC
Sets the maximum acceptable return code for a copybook compile. A return code higher than the specified level causes the function to stop. Default is 4.
Note: The COMPMAXRC parameter is still supported but it is recommended that the CBLMAXRC parameter is used instead. If you do specify the COMPMAXRC parameter, it takes precedence over the language MAXRC.
CBLLIBS
Allows you to specify a list of up to ten data set names to be specified in the SYSLIB concatenation list. These data sets are searched in the order specified for COPY and INCLUDE members for the compilation.
dsname
The name of the data set name to be processed. Generic name masks are not allowed.
CBLADDOP
Additional COBOL compiler options which are included in a CBL statement when compiling COBOL copybooks.
PL/I options
The following options are used to compile a PL/I copybook into a template:
BIN63=YES
Use the LIMITS(FIXEDBIN(63)) compiler option.
BIN63=NO
Use the LIMITS(FIXEDBIN(31)) compiler option.
DEC31=YES
Use the LIMITS(FIXEDDEC(31)) compiler option.
DEC31=NO
Use the LIMITS(FIXEDDEC(15)) compiler option.
GRAPHIC=YES
Use the GRAPHIC compiler option.
GRAPHIC=NO
Use the NOGRAPHIC compiler option.
UNALIGNED=YES
Use the DEFAULT RANGE (*) UNALIGNED, language statement to change the default alignment.
UNALIGNED=NO
Use the PL/I default.
PLIMAXRC
Sets the maximum acceptable return code for a copybook compile. A return code higher than the specified level causes the function to stop. Default is 4.
Note: The COMPMAXRC parameter is still supported but it is recommended that the PLIMAXRC parameter is used instead. If you do specify the COMPMAXRC parameter, it takes precedence over the language MAXRC.
PLILIBS
Allows you to specify a list of up to ten data set names to be specified in the SYSLIB concatenation list. These data sets are searched in the order specified for COPY and INCLUDE members for the compilation.
dsname
The name of the data set name to be processed. Generic name masks are not allowed.
PLIADDOP
Additional PL/I compiler options which are included in a *PROCESS statement when compiling PL/I copybooks.

For details on the effect of these compiler options, see the IBM VisualAge PL/I for OS/390 Programming Guide.

HLASM options
The following options are used to compile a HLASM copybook into a template:
DBCS=YES
Use the DBCS compiler option.
DBCS=NO
Use the NODBCS compiler option.
NOALIGN=YES
Use the NOALIGN compiler option.
NOALIGN=NO
Use the ALIGN compiler option.
ASMMAXRC
Sets the maximum acceptable return code for a copybook compile. A return code higher than the specified level causes the function to stop. Default is 4.
Note: The COMPMAXRC parameter is still supported but it is recommended that the ASMMAXRC parameter is used instead. If you do specify the COMPMAXRC parameter, it takes precedence over the language MAXRC.
ASMLIBS
Allows you to specify a list of up to ten data set names to be specified in the SYSLIB concatenation list. These data sets are searched in the order specified for COPY and INCLUDE members for the compilation.
dsname
The name of the data set name to be processed. Generic name masks are not allowed.
ASMADDOP
Additional HLASM compiler options which are included in a *PROCESS statement when compiling COPY and MACRO members.

For details on the effect of these compiler options, see the HLASM V1R6 Programmer's Guide.

For more information on using this function, see:

FILEMGR "$DSV DSNIN='FMNUSER.TEST.KSDS1',KEY=000100"
FILEMGR DSV