Home
Rational® Integration Tester
Reference Guide
This guide provides the topics to help the Integration tester use the product by using the user interface, commands or scripts. This guide is intended for Integration testers.
Recording Studio
With Rational® Integration Tester, you can record events (messages or database interactions) sent to and from the system under test. Use Recording Studio to control what parts of the system should be recorded. These parts could be specific parts of the system infrastructure or specific services using that infrastructure. You can then use the recorded events as a source of tests and other interactions with the system. In Recording Studio, you can record the traffic over a number of different transports.
Using the Recording Studio
Use the Recording Studio to monitor and capture events, and use captured events for tests and other artifacts for use within your Rational® Integration Tester project.
Configuring subscribe operations to record IDoc types
You can record and virtualize SAP application resources by creating a subscribe operation for a logical SAP application server and configuring it to record a specific IDoc type.

Rational® Integration Tester
- Release Notes
  This document contains information about What's new, installation, known issues, and contact information of IBM Support.
- System Requirements
  This document includes information about hardware and software requirements for IBM® Rational® Integration Tester.
- Getting Started
  This guide provides an overview and describes the tasks to get you started with Rational® Integration Tester.
- Administrator Guide
  This guide describes how to install Rational® Integration Tester. After you install the software, you can perform administration tasks such as configuration and integration of the product. This guide is intended for administrators.
- Tester Guide
  This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
- Test Manager Guide
  This guide describes the tasks that you can perform for tracking the quality of the application. This guide is intended for Test Managers.
- Troubleshooting
  While working with Rational® Integration Tester, you might encounter some problems that you can easily troubleshoot.
- Reference Guide
  This guide provides the topics to help the Integration tester use the product by using the user interface, commands or scripts. This guide is intended for Integration testers.
  - Rational® Integration Tester overview
    This section provides an overview of Rational® Integration Tester, including information about projects and files, the Rational Integration Tester user interface, environments, and project settings and preferences.
  - Architecture School
    Use the Architecture School perspective to build a system under test by using the logical, physical, and synchronization views. You can also use this perspective to manage the schemas available in your project.
  - Recording Studio
    With Rational® Integration Tester, you can record events (messages or database interactions) sent to and from the system under test. Use Recording Studio to control what parts of the system should be recorded. These parts could be specific parts of the system infrastructure or specific services using that infrastructure. You can then use the recorded events as a source of tests and other interactions with the system. In Recording Studio, you can record the traffic over a number of different transports.
    - Monitor Configuration view
      After you set up the system under test for recording, you can choose what you want to record in the Recording Studio. You can do this by selecting Monitor Configuration (in the upper-left portion of the Recording Studio perspective) that specifies what you want to record. It shares space with the Triggers view. To show the Monitor Configuration view, click the Monitor Configuration tab at the bottom of the view.
    - Events Monitors Properties view
      The Event Monitor Properties view, located directly below the Event Monitors and Triggers view, displays information about the operation that is selected in the Event Monitors view.
    - Events view
      The Events View displays events that are captured by enabled event monitors. The perspective at the right of Recording Studio is divided into two views: a list of captured events on top and details for the selected event at the bottom. Within the view, you can send a response to selected events or run and manage triggers.
    - Triggers view
      A trigger is essentially a publisher that is used to send an event to the system under test. Existing triggers are displayed in the Triggers view, which is in the upper-left portion of the Recording Studio perspective. It shares space with the Event Monitors view. To show the Triggers view, click the Triggers tab at the bottom of the view.
    - Using the Recording Studio
      Use the Recording Studio to monitor and capture events, and use captured events for tests and other artifacts for use within your Rational® Integration Tester project.
      - Capturing events
        You can use the Recording Studio to capture events. The Events View can be used with the Event Monitors view to select events and record them. You can define the destination for recorded events by using tags in the message header properties of selected operation.
      - Recording from an ad hoc monitor
        Create an ad hoc monitor to record events from a transport rather than from an operation.
      - Creating an operation from recorded events
        You can save events, including information from the monitor on which they were recorded, as a new operation.
      - Recording HTTP and HTTPS traffic
        Use the HTTP proxy in the IBM® Rational® Test Control Panel to record all HTTP and HTTPS traffic that is routed through the proxy.
      - Recording TCP traffic
        The Rational® Integration Tester HTTP/TCP Proxy, enables Rational Integration Tester to record general TCP traffic that is routed through the proxy or to route TCP traffic to stubs automatically when they start instead of routing traffic through the live system.
      - Recording Java™ Message Service (JMS) traffic
        You can use Rational® Integration Tester to record JMS Traffic.
      - Recording MQ telemetry traffic
        You can use Rational® Integration Tester to record MQ telemetry transport traffic by connecting to the MQ telemetry transport broker that you want to use and subscribing directly to topics communicated from that broker.
      - Recording RabbitMQ transport traffic
        The RabbitMQ proxy recording feature (this is not HTTP based) enables Rational® Integration Tester to record RabbitMQ transport traffic that is routed through the proxy.
      - Recording WebSphere® MQ and TIBCO EMS Server events
        Recording for WebSphere® MQ transports is carried out in a different way than other transports. The WebSphere MQ transport does not provide a native method for watching a queue in a non-destructive manner. In other words, events cannot be captured without taking them off the queue.
      - Recording and virtualizing RFCs
        You can record and virtualize SAP application resources. If you are testing a Java™ application that uses the SAP Java Connector (JCo) to make remote function calls (RFCs) to an SAP application server, use Rational® Integration Tester to record and virtualize those calls.
      - Configuring the Recording Studio settings of logical SAP application servers
        You can record SAP application resources by configuring a logical SAP application server to record IDocs. Use the Recording Studio perspective of Rational® Integration Tester to record incoming and outgoing intermediate documents (IDocs).
      - Configuring subscribe operations to record IDoc types
        You can record and virtualize SAP application resources by creating a subscribe operation for a logical SAP application server and configuring it to record a specific IDoc type.
      - Creating event monitors for SAP recordable resources
        Before you can start a recording session, you must create an event monitor in Recording Studio. Do this task after specifying the Recording Studio settings of a logical SAP application server to record intermediate documents (IDocs), or after configuring a subscribe operation for a logical SAP application server to record IDoc types.
      - Recording SQL events
        When the Rational® Integration Tester JDBC proxy is installed, you can use Rational Integration Tester and Rational Test Virtualization Server to record SQL events that are executed against databases from applications that use JDBC. There are two methods of selecting a database for recording: Architecture School method and Recording Studio method. Both methods achieve the same result but the Architecture School method is a more direct method.
      - Recording FIX traffic
        You can use Rational® Integration Tester and an HTTP/TCP proxy to record FIX traffic.
      - Recording Java™ method calls
        To record Java™ method calls, you use the Java application that you want to record, an instance of the Java virtualization agent as applicable installed into the application, and a Java method transport in Rational® Integration Tester.
      - Playing back recorded events
        You can select recorded events and replay them in the Recording Studio perspective. You can specify the pacing speed with which the messages are published (as-fast-as-possible, defined interval, or as-original). Rules and functions in the Rule Cache can be used to make basic modifications to message contents as they are published. Playback works on events that have been exported and re-imported.
    - Data masking concepts, methods, and types
      Use Rational® Integration Tester to add a data mask to particular fields in recorded messages that may contain sensitive data. When you add a mask, you prevent that sensitive data from appearing in any assets created from those messages, such as tests, test data, stubs, and data models.
  - Test Factory
    The Test Factory perspective is one of the main areas in Rational® Integration Tester. You can create all the tests and the required artifacts/data to support them.
  - Test Lab
    You use the Test Lab to execute test assets, repair tests, and open test assets for editing directly from this perspective. You can execute all of the tests, test suites, and stubs that are created in Test Factory.
  - Results Gallery
    You use the Results Gallery perspective to view an execution summary and detailed coverage, error, and performance reports for executed test suites and for test cases that were executed within a suite or as part of a test cycle.
  - Messages
    Rational® Integration Tester can publish and subscribe to messages as part of a test. A message normally consists of two parts: a header and a body. The header usually adheres to a predefined logical construction, while the structure of the body can be more arbitrary.
  - Schemas
    Rational® Integration Tester can handle many types of content. For the product to be able to interpret the variety of content types, it must associate a content format description, or schema with the content.
  - Database resources, connections, and bindings
    Rational® Integration Tester can interact with any database that supports connectivity through the JDBC specification. These interactions can be used to extract or update data where necessary, and test data sets can be taken directly from database table content.
  - Identity stores and SSL
    An identity store can group a collection of one or more certificates that can be used in IBM® Rational® Integration Tester to validate and authenticate connections that use SSL. After you create an identity store, you can use it to enable SSL communications in various messaging transports.
  - Scripting within tests and stubs
    You can use scripts in Rational® Integration Tester that include the Rational Integration Tester legacy scripting language, ECMAScript (such as JavaScript™), or any third-party scripting language that you install.
  - External tools
    Rational® Integration Tester is primarily GUI-based, but you can also run or view tests, suites, and stubs outside of the Rational Integration Tester.
  - Test actions
    Actions are the building blocks of a test. A test consists of a series of steps and each step is an action. Actions can be defined for tests and stubs.
  - Formatting and parsing date-time patterns
    For some fields in Rational® Integration Tester, you can define patterns for date-time formatting. Pattern letters are repeated, as their number determines the exact presentation of the date-time information that they represent.
  - The Add Numbers service
    The Add Numbers service, included with Rational® Integration Tester, provides a simple way to generate messages that you can observe with topology discovery or capture in Recording Studio.
- Security Considerations
  You can take certain actions to ensure that your installation is secure, customize your security settings, and set up user access controls.
- Notices
  This document provides information about copyright, trademarks, terms and conditions for product documentation.

Configuring subscribe operations to record IDoc types

You can record and virtualize SAP application resources by creating a subscribe operation for a logical SAP application server and configuring it to record a specific IDoc type.

Before you begin

Create a physical connection in your Rational® Integration Tester project to the relevant SAP application server.
Create the logical SAP application server upon which the subscribe operation will be created.

About this task

There are two methods of configuring therecording parameters:

Configure the Recording Studio settings of the relevant logical SAP application server to record a specific IDoc or IDoc type.
Create a subscribe operation for the relevant logical SAP application server and configure it to record a specific IDoc type.

This topic explains the second method.

Procedure

Open the Logical View of the Architecture School perspective.
Right-click the relevant logical SAP application server, and then click New > General > Operation on the shortcut menus.

The Operation window is displayed.
On the Message Exchange Pattern tab, click Subscribe in the Pattern list.
Note: It is not necessary to specify the schema root.
In the Transport field, ensure that the correct physical SAP application server transport is selected.
Click Watch.
Note: Watch mode subscription is not available for SAP PI 7.3.1 or later.
In the Poll Interval(s) field, enter the required number of seconds between queries.
In the IDoc Type field, enter the relevant IDoc type.
Note: The asterisk (*) and question mark (?) wildcards can be used in the IDoc Type field.
Click OK.

Results

The operation is configured to record the specified IDoc type.

You can now select the operation as a recordable resource in the Recording Studio perspective.

Note: If you want to record IDocs or subscribe to them in watch mode, you need to install the IDoc Monitor RFC. Installation instructions are available in installation_directory\tools\SAP.