PROPAGATION_DELAY

Required? No
Keyword Type Enumerated
Multiples Allowed? No, only one for each PORT keyword
   PROPAGATION_DELAY = (
      @TYPE = ENUMKEYWORD
        @ENUM_LIST = (
         MINIMUM = 0
         LAN = 76
         TELEPHONE = 113
         PKT_SWITCHED_NET = 145
         SATELLITE = 153
         MAXIMUM = 255
      )
    )
The PROPAGATION_DELAY parameter specifies the default time it takes for a signal to travel the length of the link, in microseconds, for this port. The value is encoded as a 1-byte floating-point number, represented by the following formula: 
0.1 mmm * 2 eeeee

where the bit representation of the byte is eeeeemmm.

Valid values are:
LAN
Less than 480 microseconds delay.
MAXIMUM
Maximum propagation delay.
MINIMUM
No propagation delay.
PKT_SWITCHED_NET
Between 49 512 and 245 760 microseconds delay.
SATELLITE
Longer than 245 760 microseconds delay.
TELEPHONE
Between 480 and 49 512 microseconds delay.

This parameter is optional.

Note:
The PROPAGATION_DELAY parameter cannot be set using the SNA Node Configuration application.