DEFAULT_TG_CHARS

Required? No
Keyword Type Complex
Multiples Allowed? No, only one for each PORT keyword
DEFAULT_TG_CHARS = (
 @CONVERSION_FUNCTION = DEFAULT_TG_CHARS_Conversions

   COST_PER_BYTE = (
      @TYPE = UNSIGNEDNUMBERKEYWORD
      @RANGE = 0,255
    )
   COST_PER_CONNECT_TIME = (
      @TYPE = UNSIGNEDNUMBERKEYWORD
      @RANGE = 0,255
    )
   EFFECTIVE_CAPACITY = (
      @TYPE = UNSIGNEDNUMBERKEYWORD
    )
   MODEM_CLASS = (
      @TYPE = BOOLEANKEYWORD
      @READ_ONLY = 1
      @DEFAULT = 0
    )
   PROPAGATION_DELAY = (
      @TYPE = ENUMKEYWORD
        @ENUM_LIST = (
         MINIMUM = 0
         LAN = 76
         TELEPHONE = 113
         PKT_SWITCHED_NET = 145
         SATELLITE = 153
         MAXIMUM = 255
      )
    )
   SECURITY = (
      @TYPE = ENUMKEYWORD
        @ENUM_LIST = (
         NONSECURE = 1
         PUBLIC_SWITCHED_NETWORK = 32
         UNDERGROUND_CABLE = 48
         SECURE_CONDUIT = 96
         GUARDED_CONDUIT = 128
         ENCRYPTED = 160
         GUARDED_RADIATION = 192
      )
    )
   USER_DEFINED_1 = (
      @TYPE = UNSIGNEDNUMBERKEYWORD
    )
   USER_DEFINED_2 = (
      @TYPE = UNSIGNEDNUMBERKEYWORD
    )
   USER_DEFINED_3 = (
      @TYPE = UNSIGNEDNUMBERKEYWORD
    )
)
The DEFAULT_TG_CHARS parameter is a complex keyword comprised of the following parameter keywords:
  • COST_PER_BYTE
  • COST_PER_CONNECT_TIME
  • EFFECTIVE_CAPACITY
  • PROPAGATION_DELAY
  • SECURITY
  • USER_DEFINED_1
  • USER_DEFINED_2
  • USER_DEFINED_3

See the descriptions of the parameter keywords to define the DEFAULT_TG_CHARS parameter.

Note:
The DEFAULT_TG_CHARS parameter cannot be set using the SNA Node Configuration application.