Copy To panel

This panel comes in different versions, depending on whether you have specified a template in the Copy From panel and whether the output is to be exported to an external format such as XML or CSV.

Panel and field definitions

Figure 1. Copy Utility: “To” panel (no copybook or template specified in “From” panel)

  Process   Options   Help
 ──────────────────────────────────────────────────────────────────────────────
 Copy from USERID.FMDATA(DATA1)

 To Partitioned, Sequential or VSAM Data Set, or HFS file:
    Data set name . . . . . FMDATA                                          +
    Member  . . . . . . . . DATA2   
    Volume serial . . . . .       

 Processing Options:
    Disposition             Execution "/" options          ISPF Packing
    1  1. Old or Reuse         Replace members             1  1. Asis
       2. Mod                  Binary mode, reclen            2. Pack
    Stats Option                                              3. Unpack
    1  1. Off                                                 4. None
       2. Force                                               5. Skip



 Command ===>                                                                  
  F1=Help      F2=Split     F3=Exit      F4=Expand    F7=Backward  F8=Forward
  F9=Swap     F10=Actions  F12=Cancel

Copy from

Lists the data set, HFS file (directory), WebSphere® MQ queue name, or a CICS® resource from which you are copying data.

To data set/file: Data set/path name

Can be a fully-qualified data set name or a pattern, an HFS file or directory, a WebSphere® MQ queue name, or a CICS® resource.

For information about specifying a WebSphere® MQ queue name, see Specifying an MQ manager or queue.

For information about specifying a CICS® resource, see Specifying a CICS resource.

The data set name may include a member name or name pattern in parenthesis. If the member is specified here, the associated Member field must be empty.

When you specify an HFS file or directory, you must enter a full path name. If the path name is longer than the displayed entry field, press the Expand function key (F4) to display a pop-up window in which you can enter a longer name.

To Data Set: Member

If you specified the name of a partitioned data set (PDS) without including a member name or name pattern in parenthesis in the Data set name field, then you can use this field to specify the member name or a member name pattern.

Volume serial

Serial number of the volume which is to contain the copied data set. Required for data sets which are not cataloged.

Disposition

The To data set status:

Old or Reuse: Writes copied records into the output data set, starting from the beginning of the set and replacing any existing records.
Mod: Appends the input records to the end of the data set unless the data set is a VSAM KSDS data set. In this case, the records are positioned in the data set using the key value in the input record. MOD is invalid for a member of a partitioned data set.

Replace members

Replace like-named members in an output partitioned data set.

Binary mode

When processing an HFS file, select this option to specify binary mode. In binary mode, data in an HFS file is processed without record delimiters. reclen specifies the logical record length used to deblock data into fixed records. Enter a value between 0 and 32760 (default: 80).

Clear this option to specify text mode. In text mode, the data is processed as a collection of records delimited by one or more of the following EBCDIC characters, depending on the file format: newline (X'15'), carriage return (X'25'), line feed (X'0D').

Stats Option

Determines whether ISPF statistics (if present) for the PDS members being processed are updated:

Blank: Update ISPF statistics.
1 Off: Do not update ISPF statistics.
2 Force: Always update or create ISPF statistics.

Use I/O exit

Allows you to specify a user I/O exit for compressed or encrypted data sets.

This option has two fields. To select the option, enter “/” in the field to the left of Use I/O exit. With this selected, you can then specify which exit to use in the field to the right of the field label.

Note:

The field only displays if File Manager is installed with the option USEIOX=ENABLE, and the Exit enabled field (in the Set System Processing Options panel) is set to YES. If a default is specified with either of those options, it is displayed in the field to the right of Use I/O exit.
I/O exits can only be used to process the data sets that you are using. They cannot be used to process the copybook or template that you are using to format the data set.

ISPF Packing

Provided that the output data set is a sequential file or a PDS or PDSE, an I/O exit routine is not used, and the DISP is set to OLD, one of these options can be used to control the copy behavior when processing data that is in ISPF PACK format.

1. Asis: If the input data set is packed, it is unpacked before any processing. The output is written in packed format only when the input is packed.
2. Pack: If the input data set is packed, it is unpacked before processing. The output is always written in packed format.
3. Unpack: If the input data set is packed, it is unpacked before processing. The output is always written in unpacked format.
4. None: No checking or processing of ISPF packed data occurs. This option is forced if an I/O exit has been used.
5. Skip: If the input data is packed, no processing or copying occurs.

Template fields for output data set

When you have specified a template in the Copy From panel, the Copy To panel contains additional fields, so that you can choose to specify a template for the output data set.

Figure 2. Copy Utility: “To” panel (copybook or template specified in Copy From panel)

  Process   Options   Help
 ──────────────────────────────────────────────────────────────────────────────
 Copy from FMNUSER.EXPORT                                           Top of data

 To Partitioned, Sequential or VSAM Data Set, or HFS file:
    Data set/path name  . . 'FMNUSER.DATX'                                  +
    Member name (or mask) .              (Blank or pattern for member list)
    Volume serial . . . . .              (If not cataloged)

 To Copybook/Template From:  FMNUSER.DATA(TEMPA)
    Data set name . . . . .                                               
    Member  . . . . . . . .                (Blank or pattern for member list)

 Processing Options:
   Copybook/template usage   Disposition          Enter "/" to select option
   2  1. Above               1  1. Old or Reuse      Replace members
      2. None                   2. Mod               Edit template mapping
      3. Create dynamic      Stats Option            Edit template source
   ISPF Packing              1  1. Off               Binary mode, reclen      
   1  1. Asis                   2. Force
      2. Pack                Optimize Scrambling
      3. Unpack                 1. Off
      4. None                   2. On
      5. Skip                   3. Max
 Command ===>                                                                  
  F1=Help      F2=Split     F3=Exit      F4=CRetriev  F7=Backward  F8=Forward
  F9=Swap     F10=Actions  F12=Cancel

Copybook/Template From

Lists the copybook or template specified in the Copy From panel, if applicable.

To Copybook or Template: Data set name

Data set name of the template or copybook to be used when mapping fields from the From Copybook or Template. This template does not affect the record selection or field format of the copied data. The field is ignored when the Copybook/template usage field is set to 2. None.

Note: In the case of a copybook, this can be the name of a CA-Panvalet library, or a library accessed using the Library Management System Exit.

To Copybook or Template: Member

If you specified the name of a partitioned data set (PDS) or CA-Panvalet or other external library in the Data set name field, then use this field to specify the member name or member name pattern. This field is ignored when the Copybook/template usage field is set to 2. None.

Edit template mapping

Specifies that you want to change the mapping of input fields to output fields or the data creation patterns for new fields.

Edit template source

Specifies that you want to edit the copybook used to generate the template.

Optimize Scrambling

This option specifies the method used to perform random scrambling or repeatable scrambling as defined in the To template.

Note: 1, 2, and 3 use different repeatable scrambling algorithms. Repeatable results can only be obtained by using the same optimization option.

Blank: This defaults to the setting of the OPSCRAM keyword in the installation options module.
1 Off: No optimization is performed.
2 On: This option is designed to improve performance when scrambling large amounts of data where the Repeat or Random option has been specified for various fields.
3 Max: This option is designed to provide the maximum performance improvement.
Note: If Repeat or Random has been specified for a field and a value list is not provided then duplicate alphanumeric characters within a field will yield the same scrambled character.

Fields for Export/Import options: XML

If you selected 1. XML as the Export/Import option on the Copy From panel, the Copy To panel contains additional fields that allow you to customize how the data is written to XML.

Figure 3. Copy Utility: “To” panel (XML export mode specified in Copy From panel)

  Process   Options   Help
 ──────────────────────────────────────────────────────────────────────────────
 Copy from FMNUSER.FMDATA

 To Partitioned, Sequential or VSAM Data Set, or HFS file:
    Data set/path name  . . 'FMN.FMDATA.XML'                                +
    Member name (or mask) .              (Blank or pattern for member list)
    Volume serial . . . . .              (If not cataloged)

 Processing Options:
   Disposition           Execution "/" options         Non-print. characters
   1  1. Old or Reuse       Replace members            2  1. Asis
      2. Mod                Binary mode, reclen           2. Hex
   ISPF Packing             Include fillers               3. Replace with .     
   1  1. Asis               Include redefines             4. Skip
      2. Pack               Convert to Unicode         Special characters
      3. Unpack             Split output line          1  1. Escape
      4. None                                             2. CData
      5. Skip               Stats Option                  3. Hex
   Export/Import         1  1. Off                     4. Replace with *     
   1  1. XML                   2. Force                Invalid data
                            Indent step 1              1  1. Hex
                                                          2. Replace with *     
                                                          3. Skip
 Command ===>                                                                  
  F1=Help      F2=Split     F3=Exit      F4=Expand    F7=Backward  F8=Forward
  F9=Swap     F10=Actions  F12=Cancel

Export/Import

Specifies that the output is to be written in XML format.

Execution "/" options

Replace members: Replace like-named members in an output partitioned data set.
Binary mode: When processing an HFS file, select this option to specify binary mode. In binary mode, data in an HFS file is processed without record delimiters. reclen specifies the logical record length used to deblock data into fixed records. Enter a value between 0 and 32760 (default: 80).
Clear this option to specify text mode. In text mode, the data is processed as a collection of records delimited by one or more of the following EBCDIC characters, depending on the file format: newline (X'15'), carriage return (X'25'), line feed (X'0D').
Include fillers: Fillers are unnamed items that are defined in the input template (COBOL copybook or PL/I include). Select this option to include fillers in the output.
Convert to Unicode: Indicates whether the output is to be converted to Unicode, or not.
Split output line: Indicates whether the output lines resulting from processing an input record are to be spanned contiguously over multiple output records. If so, the output records will not match output lines. If not, each output line must fit (as the only line) into a single output record, otherwise File Manager truncates the output, ends processing, and reports an error.

Indent step

Defines the number of blanks used to indent each level of XML tag nesting (each nested level in the template, COBOL copybook, or PL/I include causes an increase in indentation by the specified number of blanks). Valid range: 0–9 (default:1).

Non-print. characters

Indicates how non-printable characters are to be represented in the output.

1. Asis

Non-printable characters appear unchanged in the output.

2. Hex

A value with one or more non-printable characters is substituted by its hexadecimal representation.

3. Replace with replacing-character

Each non-printable character is substituted with a replacing character, or each substring of non-printable characters is converted to its hexadecimal representation and surrounded by nested <HEX> and </HEX> tags. The set of allowable replacing characters is limited to printable characters with the exception of special characters.

You can specify the replacing character in one of the following forms:

char

Each non-printable character is replaced with a character, such as "?". Default character: "." (dot).

C'char

Each non-printable character is replaced with a character without case translation.

X'cc'

Each non-printable character is replaced with a character defined by its hexadecimal value.

HEX

If you specify HEX instead of a replacing character, each substring of consecutive special characters is replaced by its hexadecimal representation, tagged by <HEX> and </HEX>, and nested into the content of the element. In other words, each string of consecutive special characters is represented by:

<HEX>hex-representation-of-nonprintable-char-string</HEX>

nested in the content of the element.

4. Skip

Value is skipped if it contains any non-printable characters.

Special characters

Indicates how special characters are to be represented in XML output.

1. Escape

Special characters are converted into escaped strings:

">" for ">"
"<" for "<"
"'" for "'"
""" for "'"
"&" for "&"

2. CData

The string containing special characters is left unchanged. It is enclosed in the CDATA section.

3. Hex

A value with one or more special characters is substituted with its hexadecimal representation.

4. Replace with replacing-character

Each special character is substituted with a replacing character, or each substring of special characters is converted to its hexadecimal representation and surrounded by nested <HEX > and </HEX > tags. If a replacing character is specified or defaulted, each special character is substituted with the replacing character. The set of allowable replacing characters is limited to printable characters with the exception of special characters.

You can specify the replacing character in one of the following forms:

char

Each special character is replaced with a character, such as "?". Default character: "_" (underscore).

C'char'

Each special character is replaced with a character without case translation.

X'cc'

Each special character is replaced with a character defined by its hexadecimal value.

HEX

If you specify HEX instead of a replacing character, each substring of consecutive special characters is replaced by its hexadecimal representation, tagged by <HEX> and </HEX>, and nested into the content of the element. In other words, each string of consecutive special characters is represented by:

<HEX>hex-representation-of-special-char-string</HEX>

nested in the content of the element.

Invalid data

Indicates how invalid data is to be represented in the output.

1. Hex

Any invalid value is substituted by its hexadecimal representation.

2. Replace with replacing character

Any invalid value is replaced with a string of replacing characters for the length of the value. The set of allowable characters is limited to printable characters with the exception of special characters.

You can use:

char: The value is replaced with a string of characters, such as "?". Default character: "*" (asterisk).
C'char': The value is replaced with a string of characters without case translation.
X'cc': The value is replaced with a string of characters, each character being defined by its hexadecimal value.

3. Skip

Any invalid value is skipped.

Fields for Export/Import options: CSV

If you selected 2. CSV as the Export/Import option on the Copy From panel, the Copy To panel contains additional fields that allow you to customize how the data is written to CSV.

Figure 4. Copy Utility: “To” panel (CSV export mode specified in Copy From panel)

  Process   Options   Help
 ──────────────────────────────────────────────────────────────────────────────
 Copy from FMNUSER.FMDATA

 To Partitioned, Sequential or VSAM Data Set, or HFS file:
    Data set/path name  . . 'FMN.FMDATA.CSV'                                +
    Member name (or mask) .              (Blank or pattern for member list)
    Volume serial . . . . .              (If not cataloged)

 Processing Options:
   Disposition           CSV options                   Output Options
   1  1. Old or Reuse       Include fillers            /  Replace members
      2. Mod                Include redefines             Binary mode, reclen 10
   ISPF Packing             Include headings           Invalid data
   4  1. Asis               Include leading blanks     1  1. Hex
      2. Pack               Include trailing blanks       2. Replace with *     
      3. Unpack             Leading zeros                 3. Skip
      4. None               Quoted values              Stats
      5. Skip               Single quotes              1  1. Off
                            CSV delimiter                 2. Force 
                            ASIS encapsulation 

 Command ===>                                                                  
  F1=Help      F2=Split     F3=Exit      F4=Expand    F7=Backward  F8=Forward
  F9=Swap     F10=Actions  F12=Cancel

CSV options

Include fillers

Fillers are unnamed items that are defined in the input template (COBOL copybook or PL/I include). Select this option to include fillers in the output.

Include redefines

Indicates whether redefinitions of data items that are specified in the input template (COBOL copybook or PL/I include) are to be included in the output or ignored.

Include headings

Select this option to include field names as headings in the first line of CSV output.

Include leading blanks

Select this option to preserve leading blanks in field values.

Include trailing blanks

Select this option to preserve trailing blanks in field values.

Leading zeros

Select this option to format all numeric fields with leading zeros.

Quoted values

Select this option to wrap the output field value in quotation marks as indicated by the Single quotes option. If this option is not selected, automatic encapsulation occurs when the field value contains:

A delimiter.
A quote for the first character.

Note: To suppress automatic encapsulation, select the ASIS encapsulation option.

Single quotes

Select this option to use single quotation marks instead of double quotation marks for quoted values.

CSV delimiter

Use this field to specify an alternate character to delimit fields in the output file. The default character is a comma.

ASIS encapsulation

Select this option to suppress automatic encapsulation. Automatic encapsulation occurs when the Quoted values option is not selected and the field value contains:

A delimiter.
A quote for the first character.

Replace members: Replace like-named members in an output partitioned data set.
Binary mode: When processing an HFS file, select this option to specify binary mode. In binary mode, data in an HFS file is processed without record delimiters. reclen specifies the logical record length used to deblock data into fixed records. Enter a value between 0 and 32760 (default: 80).
Clear this option to specify text mode. In text mode, the data is processed as a collection of records delimited by one or more of the following EBCDIC characters, depending on the file format: newline (X'15'), carriage return (X'25'), line feed (X'0D').

Invalid data

Indicates how invalid data is to be represented in the output.

1. Hex

Any invalid value is substituted by its hexadecimal representation.

2. Replace with replacing character

Any invalid value is replaced with a string of replacing characters for the length of the value. The set of allowable characters is limited to printable characters with the exception of special characters.

You can use:

char: The value is replaced with a string of characters, such as "?". Default character: "*" (asterisk).
C'char': The value is replaced with a string of characters without case translation.
X'cc': The value is replaced with a string of characters, each character being defined by its hexadecimal value.

3. Skip

Any invalid value is skipped.

Fields for Export/Import options: CSV Import

If you selected 3. CSV Import as the Export/Import option on the Copy From panel, the Copy To panel contains additional fields that allow you to customize how the data is written to CSV.

Figure 5. Copy Utility: “To” panel (CSV import mode specified in Copy From panel)

  Process   Options   Help
 ──────────────────────────────────────────────────────────────────────────────
 Copy from FMNUSER.FMDATA

 To Partitioned, Sequential or VSAM Data Set, or HFS file:
    Data set/path name  . . 'FMN.FMDATA.CSV'                                +
    Member name (or mask) .              (Blank or pattern for member list)
    Volume serial . . . . .              (If not cataloged)

 Processing Options:
   Disposition           CSV options                   Output Options
   1  1. Old or Reuse       Headings                   /  Replace members
      2. Mod                DBCS                          Binary mode, reclen 60
   ISPF Packing             Single quotes              Stats
   4  1. Asis             ,  CSV delimiter             1  1. Off
      2. Pack               Fillers                       2. Force
      3. Unpack             Redefines
      4. None
      5. Skip

 Command ===>                                                                  
  F1=Help      F2=Split     F3=Exit      F4=Expand    F7=Backward  F8=Forward
  F9=Swap     F10=Actions  F12=Cancel

CSV Options

Headings: Select this option if the CSV data set to be imported includes headings.
DBCS: Select this option if the CSV data set to be imported includes double-byte data (DBCS characters wrapped in shift-in (x'0E') and shift-out (x'0F') characters.
Single quotes: Select this option if the CSV data set to be imported uses single quote encapsulation instead of double quote.
CSV delimiter: Use this field to specify an alternate delimiter value to the comma "," character .
Fillers: Select this option if the CSV data set to be imported includes filler fields.
Refines: Select this option if the CSV data set to be imported includes redefines fields.

Parent panels

Copy From panel

Child panels

Copy From panel (the Copy To data set and template, if specified, was fully qualified)
Data Set Selection panel (a pattern has been entered in the Data set name field)
Member Selection panel(a pattern or a blank has been entered in the Member field)
Record Type Selection panel (Edit Template is selected and the specified template was based on a copybook with more than one record type).
Field Selection/Edit panel (Edit Template is selected and the specified template was based on a copybook with only one record type).
Dynamic Template panel (Create Dynamic option is selected or Edit Template is selected and the specified template was created dynamically).
Personal Data Set List panel (Current® Data Set List option selected from the Process drop-down menu, or REFL fastpath command entered).
Personal Data Set Lists panel (Personal Data Set Lists option selected from the Process drop-down menu, or REFD fastpath command entered).

Equivalent functions

DSC (Data Set Copy)