Welcome
Working with logs
Selecting from the log of logs list
Use the CICS® VR log of logs list panel pull-down menu to re-display the log stream list by specifying search or sort criteria. This panel lists all the log of logs that are registered in the recovery control data set (RCDS).
Working with the log of logs list Administrate pull-down menu
The methods with which you can register a log of logs to the RCDS from the Administrate pull-down menu.

What's new in CICS VR 6.1
CICS® VR 6.1 contains these changes.
Operating environment
CICS® VR uses logs to recover your VSAM data.
CICS VR Overview
Getting Started
CICS® VR and CICS® TS
CICS VR Exits
Running CICS® VR forward recovery
CICS® VR forward recovery consists of a restore and then forward recovery.
Running CICS® VR backup
The information in the following topics describe how to take a backup using CICS® VR. The panels and secondary windows are in the sequence that they are displayed during a backup job generation.
Running CICS® VR reorganization
You can reorganize a VSAM sphere using CICS® VR. VSAM sphere reorganization can increase the space of a sphere and its alternate indexes. It can also change the control interval sizes for a sphere's components.
Working with other VSAM sphere list pull-down menus
The CICS® VR recovery and backup functions are typically accessed using the Utilities pull-down menu after selecting VSAM spheres.
Working with CICS® Backout Failed spheres
The CICS® Backout Failed sphere list shows the CICS spheres registered for manual recovery or reorganization after CICS notification of a backout failure.
Working with logs
- Selecting from the log stream list
  On the CICS® VR log stream list panel, a list of all MVS™ log streams and SAM copies of log streams that are registered in the recovery control data set (RCDS) are displayed.
- Selecting from the log of logs list
  Use the CICS® VR log of logs list panel pull-down menu to re-display the log stream list by specifying search or sort criteria. This panel lists all the log of logs that are registered in the recovery control data set (RCDS).
  - Working with the log of logs list Administrate pull-down menu
    The methods with which you can register a log of logs to the RCDS from the Administrate pull-down menu.
    - Registering a log of logs in the RCDS
      How to register the log of logs in the RCDS using the Administrate pull-down menu.
    - Deregistering a log of logs from the RCDS
      How to deregister a log of logs from the RCDS using the CICS® VR log of logs deregister secondary window.
  - Working with the log of logs list Utilities pull-down menu
    From the Utilities pull-down menu, you can call a dynamic online scan of the log of logs registered to CICS® VR.
  - Working with the CICS® VR log of logs list panel List pull-down menu
    The methods with which you can list details about log of logs.
  - Working with the CICS® VR log of logs list View pull-down menu
    How to display the log of logs list by specifying search or sort criteria using the View pull-down menu.
  - Using the log of logs list Help pull-down menus
    How to obtain help information using the of the CICS® VR log of logs list panel Help pull-down menu and information about the Help pull-down menu options.
- Setting automatic deregistration criteria
  CICS® VR provides automatic deregistration to stop the RCDS from filling up. Periodically automatic deregistration removes outdated information from the RCDS, based on retention criteria you set. CICS VR can delete and uncatalog certain entities when they are deregistered from the RCDS.
- Browsing messages
  At various locations throughout the CICS® VR panel interface, CICS VR writes messages to the data set allocated to the DWWMSG ddname when the specific error conditions are detected.
- CICS® VR settings
  Use the CICS® VR main menu to customize all CICS VR settings, such as Undo logs.
Using ISMF data set lists with CICS® VR
CICS® VR is integrated with ISMF so that you can create a CICS VR recovery job for the data sets in an ISMF data set list by entering the VSAMREC line operator or list command. When you enter the VSAMREC line operator or list command, the necessary CICS VR panels are called and you can create a recovery job for the VSAM sphere.
Running CICS® VR manually
IBM® recommends that you use the CICS® VR panel interface to create recovery jobs for your VSAM spheres. Using the CICS VR panel interface eliminates the need for you to manually keep track of daily update activity, logs, backups, etc. Also, the CICS VR panel interface automatically creates the recovery JCL for you.
Running CICS® VR batch backout
The CICS® VR batch backout utility allows you to remove updates that were made to KSDS, ESDS, RRDS, and VRRDS VSAM spheres by steps in a batch job. This section describes how to run the CICS VR batch backout utility.
Understanding CICS® VR reports
The CICS® VR forward recovery and batch backout utilities produce a set of reports upon successful completion. The reports are written to the data set allocated to the DWWPRINT ddname. However, the set of reports written for the forward recovery backout utilities differ from the set of reports written for the batch backout utilities.
Understanding IBM® program support
The IBM® Customer Engineering Program Support structure helps you resolve problems with IBM products, and ensures that you can make the best use of your IBM computing systems.
Problem determination procedures
If you have to contact IBM® personnel about a CICS® VR problem, you must classify and describe the problem.
Diagnosing the causes of abends
You can determine the cause of a CICS® VR abend in a number of ways.
Reference information
The reference sections of the information contain reference information that you need when you use CICS® VR.
Glossary
The terms in this glossary are defined as they pertain to the CICS VSAM Recovery documentation.
Edition notice
This is the information for CICS VSAM Recovery for z/OS. It applies to CICS VSAM Recovery for z/OS Version 6.1, and to all subsequent versions, releases, and modifications until otherwise indicated in new editions. Make sure you are using the correct edition for the level of the product.
Download PDF
Download the PDF format documentation for CICS VSAM Recovery for z/OS 6.1

Working with the log of logs list Administrate pull-down menu

The methods with which you can register a log of logs to the RCDS from the Administrate pull-down menu.

Use one of the following methods to register a log of logs to the RCDS:

Select option 1.
Press the Register key, F6.
Type register on the command line.
Move the cursor to the Register item in the pull-down menu and press Enter.

You can deregister a log of logs from the RCDS by using one of these methods:

Select option 2.
Press the Dereg key, F11.
Type dereg on the command line.
Move the cursor to the Deregister item in the pull-down menu and press Enter.

Figure 1. Log of logs list—Administrate pull-down menu

   Administrate  Utilities  List  View  Help
 ________________________-----------------------------------------------------
 | 1 1. Register...  F6  |  CICSVR log of logs list            Row 1 to 5 of 5
 |   2. Deregister...F11 |
 |   3. Exit         F3  |logs, then select an action.
 |_______________________|
                                 
   S  Log of logs                Last scan time (GMT)    DD name
   _  CICS10.LOGOFLOG            08.159 12:10            DWWSYS1
   _  CICS11.LOGOFLOG            08.159 12:23            DWWSYS2
   _  CICS12.LOGOFLOG            08.159 12:43            DWWSYS3
   _  CICS13.LOGOFLOG            08.159 14:02            DWWSYS4
   _  CICS14.LOGOFLOG            08.159 16:53            DWWSYS5
   ***************************BOTTOM OF DATA***********************************











 Command ===> ___________________________________________________________
 F1=Help      F3=Exit      F4=ListDet   F5=ScanAll      F6=Register  F7=Bkwd
 F8=Fwd      F10=Menu bar F11=Dereg    F12=Cancel

To obtain information about each menu choice move the cursor to an item and press F1.