Welcome
CICS® VR and CICS® TS
Setting up CICS® VR for CICS® TS
The tasks you need to do to set up CICS® VR for CICS TS.
Setting up CICS® VR change accumulation
CICS® VR CA reduces the time it takes to perform a forward recovery.
Step 1: Set up change accumulation batch jobs
The first step is to create batch jobs that define CA groups and identify the spheres in each group.
Diagnosing change accumulation and DFSORT™ problems
Change accumulation calls DFSORT™, or an equivalent sort product, to sort the log records before it updates the current change accumulation data set with the next log range.
How to obtain DFSORT™ messages
To diagnose problems using DFSORT™, you must be able to see the DFSORT messages and control statements in the DWWSORT message data set.

What's new in CICS VR 6.1
CICS® VR 6.1 contains these changes.
Operating environment
CICS® VR uses logs to recover your VSAM data.
CICS VR Overview
Getting Started
CICS® VR and CICS® TS
- Setting up CICS® VR for CICS® TS
  The tasks you need to do to set up CICS® VR for CICS TS.
  - Setting up your CICS® VR ISPF environment
    Using the CICS® VR panel interface can significantly reduce the amount of effort and time required to recover your VSAM data.
  - Understanding the recovery control data set
    The CICS® VR recovery control data set (RCDS) contains essential information for recovering your VSAM spheres.
  - Deciding which VSAM spheres to protect
    You want to be able to forward recover all VSAM spheres that are defined as CICS® files. Data sets that are read-only or browse-only do not need forward recovery or backout, however, back them up regularly in case they become unusable.
  - Creating groups of VSAM spheres
    When you have decided which VSAM spheres to protect, you can create groups of VSAM spheres that share common attributes, such as spheres that reside on the same volume or are updated by the same application, into groups.
  - Registering or deregistering your log of logs data sets
    All log of logs data sets must be registered in the RCDS for CICS® VR to know about them.
  - Setting up the log of logs scan utility (scan)
    The LOGOFLOGS scan utility scans all the log of logs that are registered in the RCDS, gathers information, and updates the RCDS with this information.
  - Setting up CICS® VR change accumulation
    CICS® VR CA reduces the time it takes to perform a forward recovery.
    - Step 1: Set up change accumulation batch jobs
      The first step is to create batch jobs that define CA groups and identify the spheres in each group.
      - Understanding the change accumulation utility report
        A CICS® VR CA utility report is produced every time the CA command is issued.
      - Diagnosing change accumulation and DFSORT™ problems
        Change accumulation calls DFSORT™, or an equivalent sort product, to sort the log records before it updates the current change accumulation data set with the next log range.
        How to obtain DFSORT™ messages
        To diagnose problems using DFSORT™, you must be able to see the DFSORT messages and control statements in the DWWSORT message data set.
        How to eliminate other common errors
        DFSORT™ needs intermediate storage to sort the log records.
        How to obtain a DFSORT™ dump
        To obtain an DFSORT™ dump when an abend occurs, add the JCL and program control statements, shown in this table, to your change accumulation JCL.
        Common system abends related to storage
        The items are listed by system abend code.
    - Step 2: Use the change accumulation data sets in a forward recovery
      The second step occurs automatically when you use the CICS® VR ISPF dialog interface to forward recover a sphere.
    - Using change accumulation in a remote site recovery scenario
      If you want to periodically create change accumulation data sets and send them for use during forward recovery processing at a remote recovery site, you can consider using change accumulation with the options described in this section.
  - Deciding if you want to use shadow copies
    You can reduce the time it takes to forward recover a VSAM file by creating a shadow copy of it.
  - Understanding CICS® VR automatic deregistration
    During the execution of various CICS® VR utilities, log of logs scan, backup notification, change accumulation, and so on. CICS VR stores information in the RCDS.
  - Implementing CICS® VR automatic deregistration
    The retention period values that you enter for CICS® VR automatic deregistration reflect your current environment and requirements.
- Setting up your CICS® TS environment
  This section describes the tasks you need to do to set up your CICS® TS environment for CICS VR.
- Using the CICS® VR file copy notification service
  This section primarily documents intended Programming Interface that allow the customer to write programs to obtain the notify service of CICS® VR.
- Using CICS® VR with CICS® TS at your disaster recovery site
  This section describes the tasks you need to perform to prepare your primary site and your remote site for disaster recovery using CICS® TS and CICS VR.
- Automated Recovery and Reorganization
  This section describes the tasks to perform when enabling automated recovery in CICS® VR V4R1.
CICS VR Exits
Running CICS® VR forward recovery
CICS® VR forward recovery consists of a restore and then forward recovery.
Running CICS® VR backup
The information in the following topics describe how to take a backup using CICS® VR. The panels and secondary windows are in the sequence that they are displayed during a backup job generation.
Running CICS® VR reorganization
You can reorganize a VSAM sphere using CICS® VR. VSAM sphere reorganization can increase the space of a sphere and its alternate indexes. It can also change the control interval sizes for a sphere's components.
Working with other VSAM sphere list pull-down menus
The CICS® VR recovery and backup functions are typically accessed using the Utilities pull-down menu after selecting VSAM spheres.
Working with CICS® Backout Failed spheres
The CICS® Backout Failed sphere list shows the CICS spheres registered for manual recovery or reorganization after CICS notification of a backout failure.
Working with logs
Using ISMF data set lists with CICS® VR
CICS® VR is integrated with ISMF so that you can create a CICS VR recovery job for the data sets in an ISMF data set list by entering the VSAMREC line operator or list command. When you enter the VSAMREC line operator or list command, the necessary CICS VR panels are called and you can create a recovery job for the VSAM sphere.
Running CICS® VR manually
IBM® recommends that you use the CICS® VR panel interface to create recovery jobs for your VSAM spheres. Using the CICS VR panel interface eliminates the need for you to manually keep track of daily update activity, logs, backups, etc. Also, the CICS VR panel interface automatically creates the recovery JCL for you.
Running CICS® VR batch backout
The CICS® VR batch backout utility allows you to remove updates that were made to KSDS, ESDS, RRDS, and VRRDS VSAM spheres by steps in a batch job. This section describes how to run the CICS VR batch backout utility.
Understanding CICS® VR reports
The CICS® VR forward recovery and batch backout utilities produce a set of reports upon successful completion. The reports are written to the data set allocated to the DWWPRINT ddname. However, the set of reports written for the forward recovery backout utilities differ from the set of reports written for the batch backout utilities.
Understanding IBM® program support
The IBM® Customer Engineering Program Support structure helps you resolve problems with IBM products, and ensures that you can make the best use of your IBM computing systems.
Problem determination procedures
If you have to contact IBM® personnel about a CICS® VR problem, you must classify and describe the problem.
Diagnosing the causes of abends
You can determine the cause of a CICS® VR abend in a number of ways.
Reference information
The reference sections of the information contain reference information that you need when you use CICS® VR.
Glossary
The terms in this glossary are defined as they pertain to the CICS VSAM Recovery documentation.
Edition notice
This is the information for CICS VSAM Recovery for z/OS. It applies to CICS VSAM Recovery for z/OS Version 6.1, and to all subsequent versions, releases, and modifications until otherwise indicated in new editions. Make sure you are using the correct edition for the level of the product.
Download PDF
Download the PDF format documentation for CICS VSAM Recovery for z/OS 6.1

How to obtain DFSORT™ messages

To diagnose problems using DFSORT™, you must be able to see the DFSORT™ messages and control statements in the DWWSORT message data set.

DFSORT™ messages start with 'ICE'. If you receive a condition code of 20 or do not see the DFSORT™ messages and control statements, add the following to your change accumulation JCL:

 //DWWSORT DD SYSOUT=A

and resubmit your job.

If you still do not see the DFSORT™ messages and control statements in the DWWSORT message data set, add the following to your change accumulation JCL:

//SORTDIAG DD DUMMY

to force out the DFSORT™ messages and control statements, and resubmit your job.