Running compound tests on Android devices or emulators connected to a remote agent computer

You can run compound tests that contain mobile tests on Android mobile devices or emulators that are connected to a remote agent computer.

Before you begin

You must have completed the following tasks:

Recorded mobile tests. See Recording mobile tests for Android applications.
Created a compound test that contains mobile tests, see Creating a compound test.
Installed the Android SDK on the computer that you want to use for testing Android mobile applications.
Set or changed the value of the ANDROID_HOME environment variable on the computer that you want to use for testing Android mobile applications for the following operating systems:
- Windows operating systems, see Setting or changing the ANDROID_HOME path in Windows operating systems.
- Linux operating systems, see Setting or changing the ANDROID_HOME path in Linux operating systems.
- Mac operating systems, see Setting or changing the ANDROID_HOME path in Mac operating systems.
Connected and started the Android device or emulator to the computer that you want to use for testing Android mobile applications. You can connect the Android device to the computer through a USB cable.

About this task

When you run mobile tests, you can enable Rational® Functional Tester to collect metrics for certain parameters of the resources used by the mobile applications or devices. You can select the Resource Monitoring option and set the time intervals for the collection of the metrics during the test run.

Important: Collection of Resource Monitoring metrics and displaying of the data graphically is supported only when you run a compound test on a single device.

Procedure

Open the UI Test perspective in Rational® Functional Tester, if it is not already open.
Select the compound test that contains the mobile tests from the Test Navigator pane.
The test window is displayed.
Click Window > Preferences > Test > Test Execution > UI Test Playback.

The UI Test Playback pane is displayed.
Click the Mobile Device tab, and then perform the following steps:
1. Select the Host check box in the UI Test Agent panel, and then enter the IP address of the remote computer in the Host field.
  
  Note: The port in use by the UI Test Agent on the computer is automatically populated in the Port field.
2. Select the Android Device check box in the Android Device panel, and then enter the name of the Android device or emulator that is connected to the computer in the Android Device field.
  
  The Is real device check box is enabled.
3. Perform any of following actions:
  - If you are using an Android device, select the Is real device check box.
  - If you are using an emulator, retain the Is real device check box as deselected or clear the selection, if selected.
4. Click Apply and Close.
Click the Run Compound Test icon.
The Run Configuration dialog box is displayed.
Perform any of the following actions:
- To run each mobile test that are in the compound test on a specific device, go to step 6.
- To simultaneously run all the tests that are in the compound test on the same set of devices, go to step 7.
Clear the Run on several devices and browsers in parallel option, if selected, and then perform the following actions:
1. Click the Run using option for each test, to view the mobile devices or emulators that are connected to the remote agent computer.
2. Select a device from the list.
3. Repeat steps 6.a and 6.b, for each of the tests in the Compound test.
4. Click Next.
  
  The Advanced Playback Options dialog is displayed.
  Note: There is no action to be performed by you for mobile tests.
5. Go to step 8.
Select the Run on several devices and browsers in parallel option, if not selected.
All the mobile devices and emulators that are connected to the remote agent computer are displayed.
You must perform the following steps:
1. Select the devices on which you want to run the test.
2. Click Next.
  
  The Advanced Playback Options dialog is displayed.
  
  Note: There is no action to be performed by you for mobile tests.
3. Go to step 8.
Click Next.

The Performance Measurement dialog is displayed.
Perform the following steps if you want Rational® Functional Tester to collect the Resource Monitoring metrics during the test run:
1. Select the Resource Monitoring option.
2. Set the interval to collect the metrics by entering a number in the Polling interval field.
  
  Note: The minimum value that you can enter in the Polling interval field is 1000 milliseconds.
Click Finish.

Results

The test runs on the selected mobile devices or emulators. The test result is displayed as a unified report in Rational® Functional Tester.

What to do next

You can view the unified report for the mobile tests and choose to export the unified report. See Unified reports.

If you opted to collect the Resource Monitoring metrics, you can view the metrics displayed graphically in the UI Test Statistical report. You can analyze the Resource Monitoring metrics to manage the resources of the device or the mobile application under test. See UI Test Statistical report.