Home
Rational® Integration Tester
Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
Tester Guide - Service Virtualization
This guide describes the tasks that you can perform for using virtual services or stubs to simulate parts of an environment if the real services are not yet available or because they are difficult or expensive to use. This guide is intended for Integration Testers.
Modifying message-based stubs
You can use either the Test Editor or the Stub Editor to create, modify, and enhance any legacy or new stubs created by Rational® Integration Tester.
Performance profiles
You can use a performance profile to store response time characteristics for a stub over a period of time.
Creating performance profiles
You can use performance profiles to define response time details for a stub over time.
Importing performance data from Recording Studio
When you save events in Recording Studio, you can import performance data into a performance profile. You can then use the performance profile to simulate the timing of the responses from a stub.

Rational® Integration Tester
- Release Notes
  This document contains information about What's new, installation, known issues, and contact information of IBM Support.
- System Requirements
  This document includes information about hardware and software requirements for IBM® Rational® Integration Tester.
- Getting Started
  This guide provides an overview and describes the tasks to get you started with Rational® Integration Tester.
- Administrator Guide
  This guide describes how to install Rational® Integration Tester. After you install the software, you can perform administration tasks such as configuration and integration of the product. This guide is intended for administrators.
- Tester Guide
  This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
  - Tester Guide - Integration Testing
    This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for Integration testers.
  - Tester Guide - Performance Testing
    Typically, a user with the Integration Tester role is also responsible for performance testing. This guide lists all such topics.
  - Tester Guide - Service Virtualization
    This guide describes the tasks that you can perform for using virtual services or stubs to simulate parts of an environment if the real services are not yet available or because they are difficult or expensive to use. This guide is intended for Integration Testers.
    - Rational® Test Virtualization Server overview
      Rational® Test Virtualization Server is software that is used for creating, maintaining, publishing, and running message-based stubs and database stubs.
    - Virtualizing HTTP
      You can simulate an HTTP connection with a virtual service, also known as a stub.
    - Virtualizing HTTPS
      You can simulate an HTTPS connection with a virtual service, also known as a stub.
    - Virtualizing TCP
      You can simulate a TCP connection with a virtual service, also known as a stub.
    - Virtualizing a REST API without recording or synchronization
      You can virtualize REST APIs by using the Recording Studio, or by synchronizing WADL, Swagger, or RAML documents. When none of these options is available, you can still manually virtualize REST APIs that use path parameters.
    - Creating message-based stubs
      In Rational® Integration Tester, there are several methods that you can use to create a message-based stub.
    - Modifying message-based stubs
      You can use either the Test Editor or the Stub Editor to create, modify, and enhance any legacy or new stubs created by Rational® Integration Tester.
      - The Events tab
        With the Events tab, you can define how the stub will handle internally and/or externally received events.
      - The Behavior tab
        With the Behavior tab, you can add reusable behavioral entities, that is, pre-programmed intelligence, to your stub.
      - The Properties tab
        With the Properties tab, you can set up states for your stub and input parameters that can determine how the stub behaves when it runs.
      - The Performance tab
        With the Performance tab, you can change the performance characteristics of the stub either by adding delays when a stub runs or by disabling performance optimization.
      - The Session tab
        With the Session tab, you can configure the sharing of the tag data store between workers (instances of the stub), so that messages can be processed based on information that was captured from previously processed messages.
      - The Logging tab
        With the Logging tab, you can define how much information is recorded when the stub is run.
      - The Documentation tab
      - Adding a timer behavior to a stub
        You can use a timer behavior to set a timer event in a stub. After a set time period, the timer event is triggered, the stub receives the event, which it can then respond to. For example, you might have a stub to manage user sessions and you want to add a timer behavior that automatically logs out a user after 30 seconds of inactivity.
      - Example: Adding a repeating timer behavior to a stub
        In this example, you add a repeating timer event to a stub that starts after zero seconds and then repeats every 10 seconds.
      - Sift-and-pass-through capability
        You can filter the messages that a stub receives, separating traffic from client and server applications that need to use the live system as opposed to a virtual system.
      - Performance profiles
        You can use a performance profile to store response time characteristics for a stub over a period of time.
        Creating performance profiles
        You can use performance profiles to define response time details for a stub over time.
        Creating a stub that includes a performance profile
        You can save performance data at the same time that you save recorded events for a stub in Recording Studio.
        Importing performance data from Recording Studio
        When you save events in Recording Studio, you can import performance data into a performance profile. You can then use the performance profile to simulate the timing of the responses from a stub.
        Populating performance profiles manually
        You can populate performance profiles for stubs manually.
        Importing performance data from a spreadsheet
        In Rational® Integration Tester version 8.5.1 or later, you can populate stub performance profiles by importing data from spreadsheets.
        Importing performance data from Tivoli Composite Application Manager for Transactions
        Depending on the version of Rational® Integration Tester that you are using, you can use the Rational Integration Tester command-line client or user interface to import data from IBM® Tivoli® Monitoring and IBM Tivoli Composite Application Manager for Transactions, and then populate stub performance profiles with this data.
        Applying a performance profile to a stub
        After you create a performance profile, you must apply recorded response data to the stub execution to gather performance data.
    - Creating and modifying database stubs
      You can create and modify database stubs in Rational® Integration Tester.
    - Configuring stubs to connect to Rational® Test Control Panel and the HTTP proxy
      A stub running on its own may not be sufficient in some cases, because it might have dependencies on services such as Rational® Test Control Panel or the HTTP proxy. If the stub is running on the public cloud and the services are running in the enterprise, you must configure the stub to connect to these services.
    - Publishing and running stubs
      You can publish stubs that are created in IBM® Rational® Integration Tester to IBM Rational Test Control Panel, Dockerfile and build context, Kubernetes, or Istio, if the stub is based on a supported transport.
    - Viewing results in Rational® Test Control Panel
      You can use IBM® Rational® Test Control Panel to display the results of tests that you run in both Rational Integration Tester and Rational Test Control Panel.
    - Viewing usage statistics of virtual services in Rational® Test Control Panel
      You can use IBM® Rational® Test Control Panel to display the usage statistics of virtual services across Rational Test Virtualization Server and IBM Rational Integration Tester.
    - Viewing reports in Rational® Test Automation Server
      All the project stakeholders can view test reports for multiple testing products from the Results page on IBM® Rational® Test Automation Server. You can access the Results page from a web browser. Therefore, there is no need to install the desktop client.
    - Troubleshooting: Rational® Test Virtualization Server
      You can use workarounds to common problems that you might encounter when you use IBM® Rational® Test Virtualization Server.
- Test Manager Guide
  This guide describes the tasks that you can perform for tracking the quality of the application. This guide is intended for Test Managers.
- Troubleshooting
  While working with Rational® Integration Tester, you might encounter some problems that you can easily troubleshoot.
- Reference Guide
  This guide provides the topics to help the Integration tester use the product by using the user interface, commands or scripts. This guide is intended for Integration testers.
- Security Considerations
  You can take certain actions to ensure that your installation is secure, customize your security settings, and set up user access controls.
- Notices
  This document provides information about copyright, trademarks, terms and conditions for product documentation.

Importing performance data from Recording Studio

When you save events in Recording Studio, you can import performance data into a performance profile. You can then use the performance profile to simulate the timing of the responses from a stub.

Procedure

In Recording Studio, record a set of events and select the ones to save.
Click the Save Events button. On the Resource Type page of the Recorded Events wizard, click performance profiles.

Alternatively, click the Create a Performance Profile from selected events icon (), or right-click any of the selected events and click Create Performance Profile.

For more information about saving events, see Stub creation by using the Recording Studio.
Complete the steps in the wizard as you normally would. Make sure that your transactions are grouped properly. For example, pair requests with matching replies. Specify a name for the performance profile on the Summary page.

Results

The wizard extracts the timing data from the recorded events to automatically populate the performance profile. The profile is saved, using the name that you specified, in the Test Data folder of the resource tree in Test Factory.

What to do next

You can edit a performance profile by double-clicking the name. For more information about the contents of this file, see Populating performance profiles manually.
The performance profile is useful only when you assign it to one or more stubs. For more information, see Applying a performance profile to a stub.