Home
Rational® Integration Tester
Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
Integration Tester Guide (Service Virtualization)
This guide describes the tasks that you can perform for using virtual services or stubs to simulate parts of an environment if the real services are not yet available or because they are difficult or expensive to use. This guide is intended for Integration Testers.
Creating message-based stubs
In Rational® Integration Tester, there are several methods that you can use to create a message-based stub.
Stub creation by using the Recording Studio
Use the Recording Studio to create a message-based stub if you have access to a live system from which you can record events.
Creating a stub that manages multiple operations using recorded messages
Create a stub with multiple operations by using the Recording Studio perspective. Such a stub is required if you need to share state across several operations.

Rational® Integration Tester
- Release Notes
  This document contains information about What's new, installation, known issues, and contact information of IBM Support.
- System Requirements
  This document includes information about hardware and software requirements for IBM® Rational® Integration Tester.
- Getting Started
  This guide provides an overview and describes the tasks to get you started with Rational® Integration Tester.
- Administrator Guide
  This guide describes how to install Rational® Integration Tester. After you install the software, you can perform administration tasks such as configuration and integration of the product. This guide is intended for administrators.
- Tester Guide
  This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
  - Integration Tester Guide
    This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for Integration testers.
  - Technical Tester Guide
    Typically, a user with the Integration Tester role is also responsible for performance testing. This guide lists all such topics.
  - Integration Tester Guide (Service Virtualization)
    This guide describes the tasks that you can perform for using virtual services or stubs to simulate parts of an environment if the real services are not yet available or because they are difficult or expensive to use. This guide is intended for Integration Testers.
    - Rational® Test Virtualization Server overview
      Rational® Test Virtualization Server is software that is used for creating, maintaining, publishing, and running message-based stubs and database stubs.
    - Task flow: Working with the IBM® Rational® Test Control Panel Environments dashboard
      You can use the Rational® Test Control Panel Environments dashboard to perform various tasks such as starting, stopping stubs and scenarios, and modifying stub configurations after you have published stubs to Rational Test Control Panel. You can also lock the environment that contain the published stubs.
    - Virtualizing HTTP
      You can simulate an HTTP connection with a virtual service, also known as a stub.
    - Virtualizing HTTPS
      You can simulate an HTTPS connection with a virtual service, also known as a stub.
    - Virtualizing TCP
      You can simulate a TCP connection with a virtual service, also known as a stub.
    - Virtualizing a REST API without recording or synchronization
      You can virtualize REST APIs by using the Recording Studio, or by synchronizing WADL, Swagger, or RAML documents. When none of these options is available, you can still manually virtualize REST APIs that use path parameters.
    - Creating message-based stubs
      In Rational® Integration Tester, there are several methods that you can use to create a message-based stub.
      - Message-based stubs overview
        A message-based stub is essentially an Rational® Integration Tester resource that listens for incoming messages on a particular transport. A stub can reply to specific messages or message-types, matched according to incoming filters, by using message case actions.
      - Creating an empty stub
        You can create an empty stub. You can add content later by using the stub editor.
      - Creating a stub by using MEP
        You can use the message exchange pattern (MEP) properties for an operation, which define binding and timeout details, to create a stub.
      - Stubs with multiple operations
        You can create a single stub to manage multiple operations as a unit. Such a stub is required if you need to share state across several operations.
      - Stub creation by using the Recording Studio
        Use the Recording Studio to create a message-based stub if you have access to a live system from which you can record events.
        Creating basic stubs
        A basic stub, also called a hardcoded stub, is a stub that always returns the same response. You can create a basic stub from recorded events by using the Recorded Events wizard from the Recording Studio perspective.
        Creating parameterized stubs
        A parameterized stub, also called a data-driven stub, is one that uses a data source such as a spreadsheet. You can create a data-driven stub from recorded events.
        Creating data model-driven stubs
        Data models provide an alternative way to store data for a stub. This method creates stubs from recorded events, and such stubs can reuse the data across multiple operations.
        Creating a stub that manages multiple operations using recorded messages
        Create a stub with multiple operations by using the Recording Studio perspective. Such a stub is required if you need to share state across several operations.
        Reply-sequenced stubs
        In the Recording Studio perspective, you can create a stub that can send different replies to a particular request, depending on the state of the tag data store for the stub.
        Managing recorded events data
        IBM® Rational® Test Control Panel can be used to manage and share recorded events data exported from Rational Integration Tester.
    - Modifying message-based stubs
      You can use either the Test Editor or the Stub Editor to create, modify, and enhance any legacy or new stubs created by Rational® Integration Tester.
    - Creating and modifying database stubs
      You can create and modify database stubs in Rational® Integration Tester.
    - Configuring stubs to connect to Rational® Test Control Panel and the HTTP proxy
      A stub running on its own may not be sufficient in some cases, because it might have dependencies on services such as Rational® Test Control Panel or the HTTP proxy. If the stub is running on the public cloud and the services are running in the enterprise, you must configure the stub to connect to these services.
    - Publishing and running stubs
      You can publish stubs that are created in IBM® Rational® Integration Tester to IBM Rational Test Control Panel, Dockerfile and build context, Kubernetes, or Istio, if the stub is based on a supported transport.
    - Viewing results in Rational® Test Control Panel
      You can use IBM® Rational® Test Control Panel to display the results of tests that you run in both Rational Integration Tester and Rational Test Control Panel.
    - Viewing usage statistics of virtual services in Rational® Test Control Panel
      You can use IBM® Rational® Test Control Panel to display the usage statistics of virtual services across Rational Test Virtualization Server and IBM Rational Integration Tester.
    - Viewing reports in Rational® Test Automation Server
      All the project stakeholders can view test reports for multiple testing products from the Results page on IBM® Rational® Test Automation Server. You can access the Results page from a web browser. Therefore, there is no need to install the desktop client.
    - Troubleshooting: Rational® Test Virtualization Server
      You can use workarounds to common problems that you might encounter when you use IBM® Rational® Test Virtualization Server.
- Test Manager Guide
  This guide describes the tasks that you can perform for tracking the quality of the application. This guide is intended for Test Managers.
- Troubleshooting
  While working with Rational® Integration Tester, you might encounter some problems that you can easily troubleshoot.
- Reference Guide
  This guide provides the topics to help the Integration tester use the product by using the user interface, commands or scripts. This guide is intended for Integration testers.
- Security Considerations
  You can take certain actions to ensure that your installation is secure, customize your security settings, and set up user access controls.
- Notices
  This document provides information about copyright, trademarks, terms and conditions for product documentation.

Creating a stub that manages multiple operations using recorded messages

Create a stub with multiple operations by using the Recording Studio perspective. Such a stub is required if you need to share state across several operations.

About this task

For more information about stubs with multiple operations, see Stubs with multiple operations. For more information about recording, see Using the Recording Studio.

Procedure

In the Recording Studio perspective, monitor one of the following sources:
- A transport that has multiple operations
- Two or more operations
Generate events for multiple operations.
Highlight the events, right-click, and click Save Stub.
Complete the Recorded Events wizard, making sure that the Operation Assignment page shows multiple operations.
The new stub opens in the stub editor. Set the guard conditions so that appropriate responses are returned to the requests that the stub receives.
Separate events are generated for each request and response for each operation.

Results

When you run the stub, Rational® Integration Tester generates a separate stub process for each operation.