Home
Rational® Performance Test Server
Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
Integration Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for Integration testers.
Integration Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for Integration testers.
Testing with Software AG webMethods
You can configure and run Rational® Integration Tester with the Software AG webMethods Integration Server to connect to Software AG webMethods Broker and Integration Server resources.
Setting up webMethods Integration Server
To integrate Software AG webMethods Broker and webMethods Integration Server with Rational® Integration Tester, configure the required webMethods libraries through the Library Manager and deploy certain Rational Integration Tester files to webMethods Integration Server.
Enabling data source access for the JDBC adapters in Software AG webMethods Integration Server
In Software AG webMethods Integration Server, a container obtains the location of the data source by an internal lookup that happens outside of the regular JNDI interfaces. Therefore, specifying alternate connections is not possible. To overcome this problem, augment the configuration with additional properties where applicable.

Rational® Performance Test Server
- Release Notes
  This document contains information about What's new, installation, known issues, and contact information of IBM Support.
- System Requirements
  This document includes information about hardware and software requirements for IBM® Rational® Test Virtualization Server.
- Getting Started
  This guide provides an overview and describes the tasks to get you started with IBM® Rational® Performance Test Server.
- Administrator Guide
  Typically, a user with the administrator role is responsible for certain tasks including installation, configuration, and integration of the product. This guide lists all such topics.
- Tester Guide
  This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
  - Technical Tester Guide
    Typically, a user with the Integration Tester role is also responsible for performance testing. This guide lists all such topics.
  - Integration Tester Guide
    This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for Integration testers.
    - Integration Tester Guide
      This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for Integration testers.
      - Testing Java™ applications
        You can use Rational® Integration Tester to test Java™ applications.
      - Testing Java™ Message Service (JMS) systems
        Use the generic JMS plug-in to connect Rational® Integration Tester to a wide range of EAI platforms, which includes any vendor that provides an implementation of this Java™ standard. JMS provides a way of separating the application from the transport layer of providing data. The same Java classes can be used to communicate with different JMS providers by using the JNDI information for a specific provider. The classes first use a connection factory to connect to the queue or topic, and then use populate and send or publish the messages. On the receiving side, the clients then receive or subscribe to the messages
      - Testing Java™ objects
        You can import Plain Old Java™ Objects (POJOs) from JAR files into Rational® Integration Tester in order to parse and construct messages containing the serialized forms of those objects. You can construct and parse the Java objects and perform validation, but you cannot test the objects directly.
      - Testing with Apache Camel components
        You can use Rational® Integration Tester to create tests and stubs by setting up an Apache Camel component in a Rational Integration Tester project. You can configure the technology endpoints supported by the Camel component as the physical resources in the Rational Integration Tester project and test for the services provided by the technology.
      - Testing with Apache Kafka
        Starting from IBM® Rational® Integration Tester 10.0.2 and later, you can create Kafka transports to test Kafka services.
      - Testing with Docker
        You can use Docker containers with Rational® Integration Tester to run stubs co-located with your test systems.
      - Testing with the email transport
        When you use applications in your test environment that use email services, you can use Rational® Integration Tester to create tests and stubs for testing the email services. You can set up an email transport in a Rational Integration Tester project and configure the email servers as the physical resources in the Rational Integration Tester project, and then test the email services.
      - Testing with Envoy Proxy (Experimental)
        You can use Rational® Integration Tester to record the HTTP traffic on the Envoy Proxy by using the Experimental HTTP Tap Filter feature of the Envoy Proxy.
      - Testing with the File transport
        As with any other transport, the File transport includes both logical and physical configurations. Tests and stubs are associated with the logical File resource, which represents an abstraction of the File resource and is the same for all environments. The physical File Access configuration includes connection details, and you can configure a different physical File Access for each environment.
      - Testing with the FIX transport
        You can use the Financial Information eXchange (FIX) transport and FIX dictionaries in Rational® Integration Tester to help you test trade-related messages and the systems that use them.
      - Testing with the HTTP transport
        To provide support for HTTP-based communications, you must configure and run Rational® Integration Tester by using the HTTP transport and SOAP message formatters.
      - Testing with IBM® API Developer Portals
        You can configure IBM® Rational® Integration Tester to synchronize IBM API Connect™ Developer Portal resources or IBM API Management Developer Portal resources.
      - Testing with IBM® App Connect Enterprise
        When you want to test the services on applications deployed by the integration node of IBM® App Connect Enterprise, you can use the synchronization feature in Rational® Integration Tester to import details of deployed applications into a Rational Integration Tester project. You can select the tests and stubs to be created in your project during the synchronization process in Rational Integration Tester.
      - Testing with IBM® Integration Bus
        When you want to test the services on applications deployed by the integration node of IBM® Integration Bus, you can use the synchronization feature in Rational® Integration Tester to import details of deployed applications into a Rational Integration Tester project. You can select the tests and stubs to be created in your project during the synchronization process in Rational Integration Tester.
      - Testing with IBM® WebSphere® Application Server
        You can configure IBM® Rational® Integration Tester to synchronize IBM WebSphere® Application Server resources.
      - Testing with IBM® WebSphere® MQ messages
        You can test WebSphere® MQ messages using the WebSphere MQ transport method or JMS interface. Rational® Integration Tester also supports testing WebSphere MQ on z/OS systems.
      - Testing with WebSphere® Portal
        You can configure IBM® Rational® Integration Tester to synchronize IBM WebSphere® Portal resources.
      - Testing with IBM® z/OS® Connect Enterprise Edition
        IBM® z/OS® Connect Enterprise Edition provides a framework for enabling z/OS®-based programs and data to fully participate in the new API economy for mobile and cloud applications. Use IBM® z/OS® Connect Enterprise Edition to access z/OS subsystems, such as CICS®, IMS™ and Batch, by using RESTful APIs with JSON formatted messages. You can access multiple z/OS subsystems concurrently through a common interface.
      - Testing with Istio
        When you have applications hosted in a Kubernetes cluster that have Istio as a service mesh, you can virtualize the services in the cluster by creating stubs and tests for testing with Istio in Rational® Integration Tester.
      - Testing with Kubernetes
        For testing with Kubernetes set up a Kubernetes cluster, and then you can create and publish stubs from Rational® Integration Tester so that stubs can be run within Kubernetes. The stubs published can be co-located with existing services running within the Kubernetes cluster.
      - Testing with Microsoft™ .NET objects
        You can import serializable .NET objects from .NET assembly files (.exe or .dll) into IBM® Rational® Integration Tester and apply them to messages in the same way as you would apply a schema. A service-based test or stub can then send and receive a message containing a serialized form of a .NET object from the assembly file. You can construct and parse the .NET objects and perform validation, but you cannot test the objects directly.
      - Testing with MongoDB
        If you are using Rational® Integration Tester 9.5.0 or later, you can create MongoDB transports and run tests against them.
      - Testing with the MQ telemetry transport
        If you are using Rational® Integration Tester 8.6.0 or later, you can create MQ telemetry transports.
      - Testing with Oracle Fusion
        Configure and run Rational® Integration Tester with the Oracle Fusion plug-in, which provides support for synchronization with and testing of the web services and composites that are available on a configured SOA server (that is, an Oracle WebLogic server with Oracle SOA Suite 11g deployed on it).
      - Testing with RabbitMQ
        If you are using Rational® Integration Tester 9.2.1.1 or later, you can create RabbitMQ transports.
      - Testing with SAP applications
        You can use Rational® Integration Tester to test SAP application server resources.
      - Testing with Software AG CentraSite
        You can incorporate governance in your SOA by using the integration of Rational® Integration Tester with Software AG CentraSite.
      - Testing with Software AG Universal Messaging
        You can use Rational® Integration Tester API to test Software AG Universal Messaging Broker server resources. From Rational Integration Tester 10.0.2 or later, you can create Software AG Universal Messaging Broker transports, configure and run Rational Integration Tester with the Software AG Universal Messaging server.
      - Testing with Software AG webMethods
        You can configure and run Rational® Integration Tester with the Software AG webMethods Integration Server to connect to Software AG webMethods Broker and Integration Server resources.
        Setting up webMethods Integration Server
        To integrate Software AG webMethods Broker and webMethods Integration Server with Rational® Integration Tester, configure the required webMethods libraries through the Library Manager and deploy certain Rational Integration Tester files to webMethods Integration Server.
        Software AG webMethods requirements
        To use Software AG webMethods with Rational® Integration Tester, you need Software AG webMethods Broker and Software AG webMethods Integration Server.
        Installing the webMethods Integration Server adapter package
        To run Rational® Integration Tester tests, you must install the Rational Integration Tester webMethods Integration Server adapter package on every webMethods Integration Server.
        Deploying JDBC proxy into Software AG webMethods Integration Server
        You must deploy the JDBC proxy on each application server that is running webMethods Integration Server (WMIS). With the JDBC proxy, you can allow a server that hosts applications to use JDBC to access a live database to be recorded or virtualized.
        Enabling data source access for the JDBC adapters in Software AG webMethods Integration Server
        In Software AG webMethods Integration Server, a container obtains the location of the data source by an internal lookup that happens outside of the regular JNDI interfaces. Therefore, specifying alternate connections is not possible. To overcome this problem, augment the configuration with additional properties where applicable.
        Configuring Software AG webMethods Integration Server to use the HTTP/TCP proxy
        You can configure the webMethods Integration Server to use the proxy by editing the server startup script.
        Managing webMethods recorders
        To manage webMethods recorders, you must configure the integration by changing values in a properties file.
        webMethods network settings
        Rational® Integration Tester application preferences in the Library Manager utility include two settings that are specific to webMethods Integration Server that are WMIS Server Port and WMIS Server Bind Address.
        webMethods Broker transport
        You can create the webMethods Broker transport while creating a physical webMethods Broker resource in Rational® Integration Tester’s Architecture School. You can then configure it from the webMethods Broker resource in the Architecture School’s Physical View.
        Configuring Integration Server transport
        Software AG webMethods Integration Server connects all the systems and applications in an enterprise by means of a single integration backbone.
        Using webMethods Integration Server services
        There are several ways that Integration Server publishers and subscribers can be used in Rational® Integration Tester.
      - Testing with SSL
        To provide secure connections between clients and servers during testing, you can use the Secure Sockets Layer (SSL) technology supported by Rational® Integration Tester.
      - TCP and UDP
        In Rational® Integration Tester, you can create transports that facilitate communication between clients and servers by using both TCP- and UDP-based sockets.
      - Testing with TIBCO applications
        To use IBM® Rational® Integration Tester to test TIBCO messaging, you must configure and run Rational Integration Tester with the TIBCO messaging plug-in. Doing so supports TIBCO Rendezvous messaging ("plain" TIBCO Rendezvous messaging and TIBCO ActiveEnterprise (AE) formats), TIBCO EMS messaging, and sending and receiving AE messages by using TIBCO EMS.
      - Testing applications on z/OS®
        You can test applications on IBM® z/OS® systems by using the capabilities that are supported for mainframes by Rational® Integration Tester. Rational Integration Tester is installed as part of the IBM Rational Test Workbench product offering.
      - Configuration of virtual IP addresses as virtual clients
        You can find information about how to configure virtual IP addresses in the operating system, and then use the virtual IP addresses to configure them as virtual clients in tests or as virtual servers in stubs.
    - Extending Rational® Integration Tester functionality by using custom functions
      You can add more calculations and operations to tests by using the Rational® Integration Tester custom function class. Rational Integration Tester custom function is a Java™ class that extends the com.ghc.ghTester.expressions function.
    - Working in non-GUI mode
      You can use the tools and executable files that are provided along with the product software. You can use these tools to perform different test actions in a non-GUI mode.
- Security Considerations
  You can take certain actions to ensure that your installation is secure, customize your security settings, and set up user access controls.
- Notices
  This document provides information about copyright, trademarks, terms and conditions for product documentation.

Enabling data source access for the JDBC adapters in Software AG webMethods Integration Server

In Software AG webMethods Integration Server, a container obtains the location of the data source by an internal lookup that happens outside of the regular JNDI interfaces. Therefore, specifying alternate connections is not possible. To overcome this problem, augment the configuration with additional properties where applicable.

About this task

The process of configuring the JDBC adapter in Software AG webMethods Integration Server has the following steps:

Load the Rational® Integration Tester data source driver by changing the class of the data source implementation to com.greenhat.jdbc.ConnectionPoolDataSource.
Specify the existing value in the dataSourceClass property so that it can access the underlying implementation source.

Procedure

In webMethods Integration Server Administrator console, under the Adapters box, click JDBC Adapter. The View Connection dialog box opens.
Disable the existing data source.
Copy the value set in the DataSource Class field. You will use this value in Step 5 .
Set DataSource Class to com.greenhat.jdbc.ConnectionPoolDataSource.
Add the following name-value pairs to the Other Properties field:
- dataSourceClass=The value that you copied in Step 3 - for example, dataSourceClass=oracle.jdbc.pool.OracleDataSource
- liveDatabaseURL=The URL of the Rational® Integration Tester physical resource - for example, liveDatabaseURL=jdbc:oracle:thin:@localhost:1521:XE.
Note: Ensure that the field does not have any liveJNDIName property set.
Optional: To connect to a virtual database instance, add the following name-value pairs to the Other Properties field: virtualDBProperties=databaseName=gh|user=gh|password=gh. You can use any data source property supported by Oracle or Microsoft™ SQL providers.

Note: Format the values as name=value pairs separated by "|" (vertical pipe symbol).
Enable the data source.
Verify that the configuration works as expected.

Results

You can record, create, edit, or run stubs and implement virtualization with the built-in database.