Home
Rational® Integration Tester
Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
Integration Tester Reference
This guide provides the topics to help the Integration tester use the product by using the user interface, commands or scripts. This guide is intended for Integration testers.
Integration Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for Integration testers.
Testing applications on z/OS®
You can test applications on IBM® z/OS® systems by using the capabilities that are supported for mainframes by HCL OneTest™ API. HCL OneTest API is installed as part of the HCL OneTest Studio product offering.
Testing with WebSphere® MQ on z/OS® systems
You can test WebSphere® MQ on z/OS® by using the HCL OneTest™ API MQ exit module. You can record at the transport level or operation level when running the exit with a single queue manager. If you have a queue sharing group and if you choose to run an instance of the exit for each queue manager within the queue sharing group, you can record shared queues using mirror queue recording. You can also virtualize requests to shared queues using fixed queue stubbing.
Configuring IBM® WebSphere® MQ on z/OS®
You must configure IBM® WebSphere® MQ on IBM z/OS® to set up the required queues and namelists. Based on your system security requirement, you might need to grant permissions to enable HCL OneTest™ API to intercept the queue messages. From HCL OneTest API V9.1.1 release onwards, you can do the required setup using the example configuration JCL templates (RITDEFN, RITCFGS, and RITCFGG) which are provided with the RIT.PROC.XMIT.BIN package.
Considerations before using the V9.5.0 WebSphere® MQ exit for z/OS
In V9.5.0 the WebSphere® MQ exit for z/OS changed. Before you use that exit, you must consider the changes made to the exit.

Rational® Integration Tester
- Release Notes
  This document contains information about What's new, installation, known issues, and contact information of IBM Support.
- System Requirements
  This document includes information about hardware and software requirements for HCL OneTest™ API.
- Getting Started
  This guide provides an overview and describes the tasks to get you started with HCL OneTest™ API.
- Administrator Guide
  This guide describes how to install HCL OneTest™ API. After you install the software, you can perform administration tasks such as configuration and integration of the product. This guide is intended for administrators.
- Tester Guide
  This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
  - Integration Tester Reference
    This guide provides the topics to help the Integration tester use the product by using the user interface, commands or scripts. This guide is intended for Integration testers.
    - Integration Tester Guide
      This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for Integration testers.
      - Testing Java™ applications
        You can use HCL OneTest™ API to test Java™ applications.
      - Testing Java™ Message Service (JMS) systems
        Use the generic JMS plug-in to connect HCL OneTest™ API to a wide range of EAI platforms, which includes any vendor that provides an implementation of this Java™ standard. JMS provides a way of separating the application from the transport layer of providing data. The same Java classes can be used to communicate with different JMS providers by using the JNDI information for a specific provider. The classes first use a connection factory to connect to the queue or topic, and then use populate and send or publish the messages. On the receiving side, the clients then receive or subscribe to the messages
      - Testing Java™ objects
        You can import Plain Old Java™ Objects (POJOs) from JAR files into HCL OneTest™ API in order to parse and construct messages containing the serialized forms of those objects. You can construct and parse the Java objects and perform validation, but you cannot test the objects directly.
      - Testing with Apache Camel components
        You can use HCL OneTest™ API to create tests and stubs by setting up an Apache Camel component in a Rational® Integration Tester project. You can configure the technology endpoints supported by the Camel component as the physical resources in the HCL OneTest API project and test for the services provided by the technology.
      - Testing with Apache Kafka
        Starting from HCL OneTest™ API V10.0.2 and later, you can create Kafka transports to test Kafka services.
      - Testing with Docker
        You can use Docker containers with HCL OneTest™ API to run stubs co-located with your test systems.
      - Testing with the email transport
        When you use applications in your test environment that use email services, you can use HCL OneTest™ API to create tests and stubs for testing the email services. You can set up an email transport in a HCL OneTest API project and configure the email servers as the physical resources in the HCL OneTest API project, and then test the email services.
      - Testing with Envoy Proxy (Experimental)
        You can use HCL OneTest™ API to record the HTTP traffic on the Envoy Proxy by using the Experimental HTTP Tap Filter feature of the Envoy Proxy.
      - Testing with the File transport
        As with any other transport, the File transport includes both logical and physical configurations. Tests and stubs are associated with the logical file, which represents an abstraction of the file and is the same for all environments. The physical File Access configuration includes connection details, and you can configure a different physical File Access for each environment.
      - Testing with the FIX transport
        You can use the Financial Information eXchange (FIX) transport and FIX dictionaries in HCL OneTest™ API to help you test trade-related messages and the systems that use them.
      - Testing with the HTTP transport
        To provide support for HTTP-based communications, you must configure and run HCL OneTest™ API by using the HTTP transport and SOAP message formatters.
      - Testing with IBM® API Developer Portals
        You can configure HCL OneTest™ API to synchronize IBM API Connect™ Developer Portal resources or IBM® API Management Developer Portal resources.
      - Testing with IBM® App Connect Enterprise
        When you want to test the services on applications deployed by the integration node of IBM® App Connect Enterprise, you can use the synchronization feature in HCL OneTest™ API to import details of deployed applications into a Rational® Integration Tester project. You can select the tests and stubs to be created in your project during the synchronization process in HCL OneTest API.
      - Testing with IBM® Integration Bus
        When you want to test the services on applications deployed by the integration node of IBM® Integration Bus, you can use the synchronization feature in HCL OneTest™ API to import details of deployed applications into a Rational® Integration Tester project. You can select the tests and stubs to be created in your project during the synchronization process in HCL OneTest API.
      - Testing with WebSphere® Application Server
        You can configure HCL OneTest™ API to synchronize IBM® WebSphere® Application Server resources.
      - Testing with IBM® WebSphere® MQ messages
        You can test WebSphere® MQ messages using the WebSphere MQ transport method or JMS interface. HCL OneTest™ API also supports testing WebSphere MQ on z/OS systems.
      - Testing with WebSphere® Portal
        You can configure HCL OneTest™ API to synchronize IBM® WebSphere® Portal resources.
      - Testing with IBM® z/OS® Connect Enterprise Edition
        IBM® z/OS® Connect Enterprise Edition provides a framework for enabling z/OS®-based programs and data to fully participate in the new API economy for mobile and cloud applications. Use IBM® z/OS® Connect Enterprise Edition to access z/OS subsystems, such as CICS®, IMS™ and Batch, by using RESTful APIs with JSON formatted messages. You can access multiple z/OS subsystems concurrently through a common interface.
      - Testing with Istio
        When you have applications hosted in a Kubernetes cluster that have Istio as a service mesh, you can virtualize the services in the cluster by creating stubs and tests for testing with Istio in HCL OneTest™ API.
      - Testing with Kubernetes
        For testing with Kubernetes set up a Kubernetes cluster, and then you can create and publish stubs from HCL OneTest™ API so that stubs can be run within Kubernetes. The stubs published can be co-located with existing services running within the Kubernetes cluster.
      - Testing with Microsoft™ .NET objects
        You can import serializable .NET objects from .NET assembly files (.exe or .dll) into HCL OneTest™ API and apply them to messages in the same way as you would apply a schema. A service-based test or stub can then send and receive a message containing a serialized form of a .NET object from the assembly file. You can construct and parse the .NET objects and perform validation, but you cannot test the objects directly.
      - Testing with MongoDB
        If you are using HCL OneTest™ API V9.5.0 or later, you can create MongoDB transports and run tests against them.
      - Testing with the MQ telemetry transport
        If you are using HCL OneTest™ API 8.6.0 or later, you can create MQ telemetry transports.
      - Testing with Oracle Fusion
        Configure and run HCL OneTest™ API with the Oracle Fusion plug-in, which provides support for synchronization with and testing of the web services and composites that are available on a configured SOA server (that is, an Oracle WebLogic server with Oracle SOA Suite 11g deployed on it).
      - Testing with RabbitMQ
        If you are using HCL OneTest™ API V9.2.1.1 or later, you can create RabbitMQ transports.
      - Testing with SAP applications
        You can use HCL OneTest™ API to test SAP application server resources.
      - Testing with Software AG CentraSite
        You can incorporate governance in your SOA by using the integration of HCL OneTest™ API with Software AG CentraSite.
      - Testing with Software AG Universal Messaging
        You can use HCL OneTest™ API API to test Software AG Universal Messaging Broker server resources. From HCL OneTest API V10.0.2 or later, you can create Software AG Universal Messaging Broker transports, configure and run HCL OneTest API with the Software AG Universal Messaging server.
      - Testing with Software AG webMethods
        You can configure and run HCL OneTest™ API with the Software AG webMethods Integration Server to connect to Software AG webMethods Broker and Integration Server resources.
      - Testing with SSL
        To provide secure connections between clients and servers during testing, you can use the Secure Sockets Layer (SSL) technology supported by HCL OneTest™ API.
      - TCP and UDP
        In HCL OneTest™ API, you can create transports that facilitate communication between clients and servers by using both TCP- and UDP-based sockets.
      - Testing with TIBCO applications
        To use HCL OneTest™ API to test TIBCO messaging, you must configure and run HCL OneTest API with the TIBCO messaging plug-in. Doing so supports TIBCO Rendezvous messaging ("plain" TIBCO Rendezvous messaging and TIBCO ActiveEnterprise (AE) formats), TIBCO EMS messaging, and sending and receiving AE messages by using TIBCO EMS.
      - Testing applications on z/OS®
        You can test applications on IBM® z/OS® systems by using the capabilities that are supported for mainframes by HCL OneTest™ API. HCL OneTest API is installed as part of the HCL OneTest Studio product offering.
        Testing with CICS®
        HCL OneTest™ API supports the recording and virtualization of CICS® programs that are run on z/OS® and are called by CICS Distributed Program Link (DPL). The CICS transport supports interacting with such calls in CICS Transaction Server (EXEC CICS LINK calls and ECIRequest calls using IPIC) and CICS Transaction Gateway (ECIRequest calls). CICS programs can be called in a test via a CICS Transaction Gateway.
        Testing with WebSphere® MQ on z/OS® systems
        You can test WebSphere® MQ on z/OS® by using the HCL OneTest™ API MQ exit module. You can record at the transport level or operation level when running the exit with a single queue manager. If you have a queue sharing group and if you choose to run an instance of the exit for each queue manager within the queue sharing group, you can record shared queues using mirror queue recording. You can also virtualize requests to shared queues using fixed queue stubbing.
        Transferring the JCL and executable files for Websphere MQ to z/OS®
        To transfer JCL and executable files to IBM® z/OS®, download and extract the HCL OneTest™ API API exit for Websphere MQ (z/OS) package.
        Unpacking the files
        Use the TSO receive command to unpack the files in IBM® z/OS®.
        APF authorizing the load library
        The system programmer must APF-authorize the userid.RIT.AUTH library.
        Adding the HRVMMQF module to the Link Pack Area
        You can dynamically add the HRVMMQF module to the Link Pack Area (LPA).
        Configuring IBM® WebSphere® MQ on z/OS®
        You must configure IBM® WebSphere® MQ on IBM z/OS® to set up the required queues and namelists. Based on your system security requirement, you might need to grant permissions to enable HCL OneTest™ API to intercept the queue messages. From HCL OneTest API V9.1.1 release onwards, you can do the required setup using the example configuration JCL templates (RITDEFN, RITCFGS, and RITCFGG) which are provided with the RIT.PROC.XMIT.BIN package.
        Considerations before using the V9.5.0 WebSphere® MQ exit for z/OS
        In V9.5.0 the WebSphere® MQ exit for z/OS changed. Before you use that exit, you must consider the changes made to the exit.
        Security settings for MQ exit resources on z/OS
        If security is enabled for your queue manager or queue sharing group, you must set up security for the HCL OneTest™ API MQ exit resources and give user IDs access to the HCL OneTest API intercept queue.
        Additional configuration steps if the HCL OneTest™ API user cannot be given queue create permission
        As of version 9.2.0, HCL OneTest™ API uses queues that are named COM.GREENHAT.INTERCEPT_LCK, COM.GREENHAT.INTERCEPT.<QMGR>_LCK, RIT.DIVERT.RULES_LCK, and RIT.DIVERT.RULES.<QMGR>_LCK. Which of these queues is required depends on your environment. HCL OneTest API attempts to create these queues automatically when they are first accessed. If you do not allow HCL OneTest API to create queues, then you must predefine these queues.
        Message interception and application setup
        Every intercepted message results in an MQPUT1 to the HCL OneTest™ API queue, which doubles the CPU cost of an MQPUT or MQPUT1. To reduce the overhead, intercept only the messages that you are interested in rather than intercepting all messages.
        Editing the JCL file for local customization
        You can edit the JCL file for local customization in RIT.PROC.
        Running the HCL OneTest™ API jobs
        You can run the HCL OneTest™ API job and stop the running ones.
        Verifying the configuration and installation of the API Exits
        After you configure the IBM® WebSphere® MQ on IBM z/OS® and install the API Exits, you can verify if the configurations and the exits are installed correctly by running the installation verification jobs that are provided with the RIT.PROC.XMIT.BIN package. If you have set up HCL OneTest™ API to run with a single queue manager, use jobs RITIVP1, RITIVP2, and RITIVP3. If you have set up HCL OneTest API to run with a queue sharing group, use jobs RITIVP1G, RITIVP2G, and RITIVP3G.
        Special considerations for queue sharing groups
        Starting HCL OneTest™ API V9.1.1, you can record and virtualize shared queues in a queue sharing group.
        Creating transports for WebSphere® MQ
        To record interactions with IBM® WebSphere® MQ, you must set up transports to provide information about the infrastructure of these systems. HCL OneTest™ API uses a decoupled, plug-in architecture to provide maximum flexibility for the messaging transport software in use by a system under test.
        Using WebSphere® MQ transports on distributed platforms to test traffic to and from WebSphere® MQ on z/OS
        You can record requests from a non-z/OS queue manager to a queue on a z/OS queue manager and virtualize replies from z/OS to a queue on a non-z/OS queue manager without installing the HRVMMQF exit.
        Uninstalling HCL OneTest™ API and the HRVMMQF exit module
        Uninstalling the HCL OneTest™ API HRVMMQF exit module involves a few actions.
        Testing with IMS™ Connect
        For testing with IBM® Information Management System (IMS) Connect, you can set up HCL OneTest™ API. The set up will help you to record the IMS™ Connect traffic.
        Testing with IBM® Db2® on z/OS® systems
        With the Agent for z/OS® that works together with IBM® Debug for z/OS, you can record SQL statements to Db2® for z/OS databases from COBOL and PL/I programs that run on z/OS.
        Troubleshooting: Testing on IBM® z/OS®
        You can use workarounds to common problems that you might encounter when you use IBM® z/OS® with HCL OneTest™ API.
      - Configuration of virtual IP addresses as virtual clients
        You can find information about how to configure virtual IP addresses in the operating system, and then use the virtual IP addresses to configure them as virtual clients in tests or as virtual servers in stubs.
    - Extending HCL OneTest™ API functionality by using custom functions
      You can add more calculations and operations to tests by using the HCL OneTest™ API custom function class. HCL OneTest API custom function is a Java™ class that extends the com.ghc.ghTester.expressions function.
    - Working in non-GUI mode
      Many test actions can be completed in non-GUI mode by using the command line, Ant, or REST interfaces.
  - Technical Tester Guide
    Typically, a user with the Integration Tester role is also responsible for performance testing. This guide lists all such topics.
  - Integration Tester Guide (Service Virtualization)
    This guide describes the tasks that you can perform for using virtual services or stubs to simulate parts of an environment if the real services are not yet available or because they are difficult or expensive to use. This guide is intended for Integration Testers.
- Test Manager Guide
  This guide describes the tasks that you can perform for tracking the quality of the application. This guide is intended for Test Managers.
- Troubleshooting HCL OneTest™ API
  While working with HCL OneTest™ API, you might encounter some problems that you can easily troubleshoot.
- HCL OneTest™ API reference
  HCL OneTest™ API is a scripting-free environment for developing tests for service-oriented architecture (SOA) messaging and business process integration projects. Tests can be built by recording existing system behaviors or from requirements, by entering the data to send and the data that is expected in return.
- Security Considerations
  You can take certain actions to ensure that your installation is secure, customize your security settings, and set up user access controls.
- Notices
  This document provides information about copyright, trademarks, terms and conditions for product documentation.

Considerations before using the V9.5.0 WebSphere® MQ exit for z/OS

In V9.5.0 the WebSphere® MQ exit for z/OS changed. Before you use that exit, you must consider the changes made to the exit.

Starting in V9.5.0, the WebSphere® MQ exit on z/OS does additional checking to verify the user’s authority to record. When recording a WebSphere® MQ transport or recording an operation with wildcard characters in queue names, the RIT user must have access to the queue named COM.GREENHAT.ALLOW.GENERIC.QNAMES. If you are upgrading to version 9.5.0 of the WebSphere® MQ exit on z/OS, you must follow these steps.

Create queue COM.GREENHAT.ALLOW.GENERIC.QNAMES. You can find an example of the command to create the queue in job RITDEFN.
Give READ access to this queue only to users who are allowed to perform transport recording or recording of queues containing wild card characters in the queue names. You can find examples of the RACF commands to do this in the RITCFGS (single queue manager) and the RITCFGG (queue sharing group) jobs.
Update HCL OneTest™ API for all users who perform mirror queue recording, dynamic mirror queue recording, stubbing with fixed queues, or stubbing with dynamic queues on queues residing on a WebSphere® MQ queue manager on z/OS.
Implement the version 9.5.0 WebSphere® MQ exit on z/OS.

If you want to implement the V9.5.0 exit before HCL OneTest™ API was upgraded for all users, another option is to disable the new security features of the exit by specifying AUTHCHK(NO) on the EXEC statement PARM parameter within the JCL used to start the exit. This causes the exit to perform the same as in previous releases. Once all RIT users are upgraded, you can then restart the exit without the AUTHCHK(NO) parameter.