Home
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in Rational® Test Automation Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
Configuration of a change management system
When you use any application to create and track defects (bugs), issues, or other work items, you can configure the application as a change management system on Rational® Test Automation Server. You can then create defects (bugs), issues, or other work items without the need to open your application.
Configuration of Rational® ClearQuest® as a change management system
You can use IBM® Rational® ClearQuest® as a change management system in Rational Test Automation Server to create Rational ClearQuest work items after you run tests on Rational Test Automation Server. You can then view and track the Rational ClearQuest work items in Rational ClearQuest.

Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in Rational® Test Automation Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
- System modeling
  You can use the system model feature on Rational® Test Automation Server to create a model that simulates an application or system under test. You can define components to represent the actual components in the system under test, define their relationships and then view the components in a system under test as a diagrammatic representation.
- Prerequisites to running tests
  Before you can run a test asset in a project on Rational® Test Automation Server, you must read the information about the different tests assets. You can add a remote static agent or Docker host to the project and then select it as an alternate location to run the test assets.
- Management of agents
  You can find information about managing performance agents or API agents that you install on remote computers and then configure the remote agents to register with IBM® Rational® Test Automation Server. After the agents are registered, you can add them to your projects and then select them as locations to run tests or virtual services.
- Management of Docker hosts
  You can find information about the tasks that you can perform on remote Docker hosts. After you set up a remote Docker host, you can register the Docker host with IBM® Rational® Test Automation Server. You must then add the registered remote Docker host to your project before you can run tests on the remote Docker host location.
- Management of remote Kubernetes clusters
  You can find information about the tasks that you can perform on remote Kubernetes clusters. After you set up a remote Kubernetes cluster, you can register the external cluster with a team space on IBM® Rational® Test Automation Server. You must then add the remote cluster to a project before you run test assets or resources on the remote Kubernetes cluster.
- Test run configurations
  You can configure and run tests in IBM® Rational® Test Automation Server after you add the test resources to your project in your team space.
- Configuration of test runs in a GitHub Actions Workflow
  You can configure test runs of test resources that are in a project repository of Rational® Test Automation Server in a GitHub Actions Workflow. You can choose to run test resources that are in your server project in the GitHub Workflow when you do not want to run the test resources without opening the Rational Test Automation Server project.
- Configuration of a scan of an application code
  You can use Rational® Test Automation Server to scan your application code for security vulnerabilities similar to using the HCL AppScan CodeSweep plugin to scan code in Visual Studio.
- Management of running tests
  Find information about the tasks that you can perform on a test that you configured for a run either while it runs or after it completes the run.
- Management of virtualized services
  You can find information about the tasks that you can perform on and manage the virtualized services that run on Rational® Test Automation Server. You can start or stop the virtual services that are available to Rational Test Automation Server. You can view the routing rules and usage statistics of virtualized services, agents, or intercepts that are connected to Rational Test Automation Server.
- Test results
  After the tests, Suites, or schedules are run and completed, you can view the results and open the reports in IBM® Rational® Test Automation Server to analyze the verdict, the performance, and statistics. You can also re-execute tests and schedules from the Result page with the same commit id.
- Resource monitoring
  When you apply load to a system under test, the amount of resources consumed by your system is increasing. If the capacity of the resources does not match the load, you can see performance issues in the results. Resource monitoring in Rational® Test Automation Server helps you monitoring the resources of a system and establish the performance metrics and usage data of the system. Thus, you can observe the health of these resources while a schedule is running.
- Configuration of a change management system
  When you use any application to create and track defects (bugs), issues, or other work items, you can configure the application as a change management system on Rational® Test Automation Server. You can then create defects (bugs), issues, or other work items without the need to open your application.
  - Configuration of Atlassian Jira as a change management system
    You can use Atlassian Jira as a change management system in Rational® Test Automation Server to create issues in the Jira project for the tests that ran in Rational Test Automation Server. Links to the Jira issues are displayed on the Results page in Rational Test Automation Server, and you can then view and track the Jira issues in Jira.
  - Configuration of Azure DevOps as a change management system
    You can use Azure DevOps as a change management system in Rational® Test Automation Server to create work items in the Azure DevOps project for the tests that ran in Rational Test Automation Server. Links to the Azure DevOps work items are displayed on the Results page in Rational Test Automation Server, and you can then view and track the work items in the Azure DevOps server.
  - Configuration of HCL® Compass as a change management system
    You can use HCL® Compass as a change management system to create HCL Compass work items after you run tests on Rational® Test Automation Server. You can then view and track the HCL Compass work items in HCL Compass.
  - Configuration of Rational® ClearQuest® as a change management system
    You can use IBM® Rational® ClearQuest® as a change management system in Rational Test Automation Server to create Rational ClearQuest work items after you run tests on Rational Test Automation Server. You can then view and track the Rational ClearQuest work items in Rational ClearQuest.
    - Configuring Rational® ClearQuest®
      You can configure IBM® Rational® ClearQuest® as a change management system in your project to create the Rational ClearQuest work items from Rational Test Automation Server.
    - Creating Rational® ClearQuest® work items
      You can create IBM® Rational® ClearQuest® work items for the tests that ran on Rational Test Automation Server. For example, you might want to create a work item in Rational ClearQuest when the test results differ from the expected results.
    - Viewing details of the Rational® ClearQuest® work items
      After you create a work item in IBM® Rational® ClearQuest® from Rational Test Automation Server, you can view and track the details of the IBM Rational ClearQuest work item in Rational ClearQuest.
    - Managing the Rational® ClearQuest® configuration
      You can manage the IBM® Rational® ClearQuest® configuration that you set in Rational Test Automation Server when you want to edit and modify the configuration or when you want to delete the existing configuration.
- Integrations with other applications
  You can integrate certain applications with IBM® Rational® Test Automation Server to run tests, view the test results, and create defects.
- Managing access to IBM® Rational® Test Automation Server
  Desktop clients and third-party integrations use offline user tokens to connect to Rational® Test Automation Server.
- Working with IBM® Rational® Test Automation Server REST services
  When you want to use the IBM® Rational® Test Automation Server REST APIs in your test automation scripts, you can view the REST APIs that are exposed by IBM Rational Test Automation Server. You can also run the APIs from within your project in IBM Rational Test Automation Server.

Configuration of Rational® ClearQuest® as a change management system

You can use IBM® Rational® ClearQuest® as a change management system in Rational® Test Automation Server to create Rational® ClearQuest® work items after you run tests on Rational® Test Automation Server. You can then view and track the Rational® ClearQuest® work items in Rational® ClearQuest®.

Prerequisites

Before you configure Rational® ClearQuest® on Rational® Test Automation Server, you must have completed the following tasks:

Ensured that you obtained the access and authentication details to Rational® ClearQuest® from the Rational® ClearQuest® administrator.
Created a project in your team space in Rational® Test Automation Server. See Adding a project.
Ensured that you are assigned a role as a Project Owner or Tester in the project. See Managing access to the server projects.

Task flow

You can follow the tasks that are listed in the following table when you want to use Rational® ClearQuest® as a change management system on Rational® Test Automation Server. The table also provides links to the information about the tasks.


S.N	Task	Go to...
1	Configure Rational® ClearQuest® as a change management system.	Configuring Rational ClearQuest
2	Create Rational® ClearQuest® work items for the tests that ran on Rational® Test Automation Server.	Creating Rational ClearQuest work items
3	View and track the details of the created Rational® ClearQuest® work items.	Viewing details of the Rational ClearQuest work items

You can manage the Rational® ClearQuest® settings that you configured in Rational® Test Automation Server. You can edit the saved configuration or you can delete the configuration. For more information, see Managing the Rational ClearQuest configuration.