Performance report

Contents

• Overall page
• Summary page
• Page Performance page
• Response vs. Time Summary page
• Response vs. Time Detail page
• Page Throughput page
• Server Throughput page
• Server Health Summary page
• Server Health Detail page
• Caching Details page
• Resources page
• Page Element Responses
• Page Response Time Contributions
• Page Size
• Errors
• Page Health

Overall page

The Overall page provides the following information:

• A progress indicator that shows the state of the run.
• A pie chart that shows the information about the overall verification point passed and failed for the test run if they were set. For the schedule run, it displays the overall requirements that passed and failed.

Summary page

The Summary page displays the following Run Summary information:

• The name of the test.
• The number of users that are active and the number of users that have completed testing. This number is updated during the run.
• The elapsed time. This is the run duration, which is displayed in hours, minutes, and seconds.
• The status of the run. This can be Initializing Computers, Adding Users, Running, Transferring data to test log, Stopped, or Complete.
• Displaying results for computer: All Hosts. To see summary results for individual computers, click the computer name in the Performance Test Runs view.

The Summary page displays the following Page Summary information:

• The total number of page attempts and hits. A page attempt means that a primary request was sent; it does not include requests within the page. A hit means that the server received the primary request and returned any complete response.
• The average response time for all pages. Response time is the sum of response times for all page elements (including the connect time and inter-request delays). Response time counters omit page response times for pages that contain requests with status codes in the range of 4XX (client errors) to 5XX (server errors). The only exception is when the failure (for example, a 404) is recorded and returned, and the request is not the primary request for the page. Page response times that contain requests that time out are always discarded.
• The standard deviation of the average response time for all pages.
• The maximum response time for all pages.
• The minimum response time for all pages.
• A summary of the results for page verification points, if these verification points were set.

The Summary page displays the following Page Element Summary information:

• The total number of page element attempts and hits. A page element attempt means that a request was sent. A hit means that the server received the request and returned any complete response.
• The total number of page elements where no request was sent to the server because the client determined that the page elements were fresh in the local cache.
• The average response time for all page elements. Response time is the time between the first request character sent and the last response character received. Response times for HTTP requests that time out or that return an unexpected status code (the recorded and played back codes do not match) in the range of 4XX (client errors) to 5XX (server errors) are discarded from the reported values.
• The standard deviation of the average response time. The standard deviation tells you how tightly the data is grouped about the mean. For example, System A and System B both have an average response time of 12 ms. However, this does not mean that the response times are similar. System A might have response times of 11, 12, 13, and 12 ms. System B might have response times of 1, 20, 25, and 2. Although the mean time is the same, the standard deviation of System B is greaterand the response time is more varied.
• The percentage of verification points that passed.
• A summary of the results for page element verification points, if these verification points were set.

If you have set transactions in your test, the Summary page displays the following Transaction information:

• The minimum, maximum, and average response time for all transactions. Response time is the actual time spent within the transaction container.
• The standard deviation of the average response time. The standard deviation tells you how tightly the data is grouped about the mean. For example, System A and System B both have an average response time of 12 ms. However, this does not mean that the response times are similar. System A might have response times of 11, 12, 13, and 12 ms. System B might have response times of 1, 20, 25, and 2. Although the mean time is the same, the standard deviation of System B is greaterand the response time is more varied.
• The total number of transactions that were started and completed.

Page Performance page

The bar chart shows the average response time of the 10 slowest pages. Each bar represents a page that you visited during recording. As you run the test, the bar chart changes, because the 10 slowest pages are updated dynamically during the run. For example, the Logon page might be one of the 10 slowest pages at the start of the run, but then, as the test progresses, the Shopping Cart page might replace it as one of the 10 slowest. After the run, the page shows the 10 slowest pages for the entire run.

Response vs. Time Summary page

• The Page Response vs. Time graph shows the average response time for all pages during the run. Each point on the graph is an average of what has occurred during that interval. The table after the graph lists the total average response time for all pages in the run and the standard deviation of the average response time.
• The Page Element response vs. Time graph shows the average response time for all page elements during the run. Each point on the graph is an average of what has occurred during that interval. The table under the graph lists the total average response time for all page elements in the run and the standard deviation of the average response time. The table also lists the total number of page elements where no request was sent to the server because the client determined that the page elements were fresh in the local cache. You set the Statistics sample interval value in the schedule, as a schedule property.

Response vs. Time Detail page

The Average Page Response Time graph shows the average response of each page for each sample interval. When a schedule includes staged loads, colored time-range markers at the top of the graph delineate the stages. The table after the graph provides the following additional information:

• The minimum page response time for the run. Response time is the time between the first request character sent of the primary request and the last response character received. Response time counters omit page response times for pages that contain requests with status codes in the range of 4XX (client errors) to 5XX (server errors). The only exception is when the failure (for example, a 404) is recorded and returned, and the request is not the primary request for the page. Page response times that contain requests that time out are always discarded.
• The average page response time for the run. This is similar to the graph, but the information in the table includes the entire run.
• The maximum page response time for the run.
• The standard deviation of the average response time. The standard deviation tells you how tightly the data is grouped about the mean. For example, System A and System B both have an average response time of 12 ms. However, this does not mean that the response times are similar. System A might have response times of 11, 12, 13, and 12 ms. System B might have response times of 1, 20, 25, and 2. Although the mean time is the same, the standard deviation of System B is greaterand the response time is more varied.
• The rate of page attempts per interval for the most recent statistics sample interval. A page attempt means that the primary request was sent; it does not include requests within the page. You set the Statistics sample interval value in the schedule, as a schedule property.
• The number of page attempts per interval.

Page Throughput page

• The Page Hit Rate graph shows the page attempt rate and page hit rate per sample interval for all pages.

  A page attempt means that the primary request was sent; it does not include requests within the page.

  A hit means that the server received the primary request and returned any complete response.

  When a schedule includes staged loads, colored time-range markers at the top of the graph delineate the stages. The summary table after the graph lists the total hit rates and counts for each page in the run.
• The User Load graph shows active users and users that have completed testing, over the course of a run. The summary table after the graph lists the results for the most recent sample interval. You set the Statistics sample interval value in the schedule, as a schedule property. As the run nears completion, the number of active users decreases and the number of completed users increases. The summary table after the graph lists the active and completed users for the entire run.
  Note: To set the sample interval value, open the schedule, click the Statistics tab, and then view or modify Statistics sample interval.

If you add virtual users during a run and watch these two graphs in tandem, you can monitor the ability of your system to keep up with the workload. As the page hit rate stabilizes, even though the active user count continues to climb and the system is well-tuned, the average response time will naturally slow down. This response time reduction happens because the system is running at its maximum effective throughput level and is effectively throttling the rate of page hits by slowing down how quickly it responds to requests.

Server Throughput page

• The Byte Transfer Rates graph shows the rate of bytes sent and received per interval for all intervals in the run. When a schedule includes staged loads, colored time-range markers at the top of the graph delineate the stages. The summary table after the graph lists the total number of bytes sent and received for the entire run.
• The User Load graph shows active users and users that have completed testing, per sample interval, over the course of a run. You set the Statistics sample interval value in the schedule, as a schedule property. As the run nears completion, the number of active users decreases and the number of completed users increases. The summary table after the graph lists the active and completed users for the entire run.

Server Health Summary page

• The Page Health chart shows the total number of page attempts, page hits, and status code successes for the run. The table under the bar chart lists the same information.

  A page attempt means that a primary request was sent; it does not include requests within the page.

  A hit means that the server received the primary and returned any complete response.

  A success means that the response code verification point passed for that request. If a primary request has no verification points, the Success value indicates that the server received the primary request and returned a response with one of the following status codes:

  • 200 or 300 category
  • 400 or 500 category, which is an expected response code
• The Page Element Health chart shows the total number of page element attempts, page element hits, status code successes, and page element redirections for the run. The table under the bar chart lists the same information and the total number of page elements where no request was sent to the server because the client determined that the page elements were fresh in the local cache.

Server Health Detail page

• The bar chart shows 10 pages with the lowest success rate.
• The summary table under the chart lists, for all pages, the number of attempts, hits, and successes in the run and the attempts per second during the run.

  An attempt means that a primary request was sent; it does not include requests within the page.

  A hit means that the server received the primary and returned any complete response.

  A success means that the response code verification point passed for that request. If a primary request has no verification points, the Success value indicates that the server received the primary request and returned a response with one of the following status codes:

  • 200 or 300 category
  • 400 or 500 category, which is an expected response code

Caching Details page

• The Caching Activity graph shows the total number of page element cache attempts, page element cache hits, and page element cache misses for the run. These values correspond to responses from the server, indicating whether the content has been modified. Additionally, the bar chart shows the total number of page elements in the cache that were skipped for the run. That value indicates the cache hits that were still fresh in the local cache, where communication with the server was not necessary.
• The Page Element Cache Hit Ratios graph shows the percentage of cache attempts that indicate server-confirmed success and client-confirmed success for the run. Server-confirmed cache hits occur when the server returns a 304 response code. Client-confirmed cache hits occur when the content is still fresh in the local cache and no communication with the server is required.

Resources page

The Resources page displays the following information as mentioned in the table:

When you click on any of the sources, the graph removes all the resource counters of other sources and displays only the resource counters of the selected source.

For example, you have an Apache httpd server and a Windows Performance Host as a Resource Monitoring source. When the schedule completes, the Resources page displays the resource counter information of both the sources. If you want to analyze the resource counters for any one of the sources, you can click the Apache httpd server or the Windows Performance Host. Based on your selection, the graph is updated to show the selected source resource counters information.

The Performance Summary table under the graph lists the most recent values of the resource counters that were monitored during the schedule run. The first two columns show the Type of the source and Name of the resource counter. This table also lists the minimum, maximum, and average values of the resource counters that were monitored during the schedule run.

Page Element Responses

Page Response Time Contributions

Page Size

The size of a page is mostly determined by the size of its elements. Each bar in this report represents a page. To view the Page Elements Size report, click a bar and select Page Element Sizes. All the elements that are on the page show up with sizes.

Errors

Page Health

Use this page(report) to determine if the pages of your application have errors. If a page contains any error, the report displays that the page is not 100% healthy. If there are pages that are not 100% healthy, the report displays another section listing such pages and the errors reported.