Welcome
Messages
Messages
HAT0416
An error occurred while forwarding control to WebFacing.

HATS Release Notes
What's new in HATS 9.7
HATS prerequisites
Getting Started
User's and Administrator's Guide
Web Application Programmer's Guide
Cloud Deployment
Messages
- Messages
  - HAT0001
    Loading configuration data from {0}.
  - HAT0002
    The message log file is {0}.
  - HAT0003
    The trace log file is {0}.
  - HAT0040
    A program exception occurred. There may be additional messages in this log which describe the error. The following information may help determine the cause, if this log is requested by IBM® service: {0}
    {1}
  - HAT0060
    File {0} was not found.
  - HAT0061
    Directory {0} was not found.
  - HAT0062
    Archive file {0} could not be created.
  - HAT0300
    An unexpected exception was received: {0}
  - HAT0350
    An error occurred reading the file {0}.
  - HAT0351
    An error occurred writing the file {0}.
  - HAT0352
    Cannot find the file named {0}.
  - HAT0353
    Creating the file {0}.
  - HAT0354
    Failed to delete the file named {0}.
  - HAT0360
    Licenses used ({0}) exceeding licenses purchased ({1}). For more information on licensing enablement, see the InfoCenter at ({2}).
  - HAT0361
    HATS License key is corrupt. Default assigned. For more information on licensing enablement, see the InfoCenter at ({0}).
  - HAT0362
    HATS License key is missing. Default assigned. For more information on licensing enablement, see the InfoCenter at ({0}).
  - HAT0363
    HATS Error reading HATS License key. Default assigned. For more information on licensing enablement, see the InfoCenter at ({0}).
  - HAT0400
    An exception occurred creating the host configuration. A message containing the exception details follows.
  - HAT0401
    Cannot connect to the host using the following session properties:{0}
  - HAT0402
    Session is in CONNECTION_ACTIVE state, but not CONNECTION_READY state. A possible reason could be that the TN server port specified does not support the data stream expected. Session properties being used:
    {0}
  - HAT0403
    Cannot load the application {0}.
  - HAT0405
    Session is ready, but no host data was available. Session properties:{0}
  - HAT0410
    An error occurred while processing this request. Detailed error information: {0}
  - HAT0411
    The host connection is inactive.
  - HAT0412
    An error occurred while processing an application Web page "{0}".
  - HAT0413
    An exception occurred. {0}
  - HAT0414
    An error occurred while scanning for screen matches.
  - HAT0415
    The wfhats.xml file is malformed.
  - HAT0416
    An error occurred while forwarding control to WebFacing.
  - HAT0600
    An error occurred while retrieving the action list for the screen customization "{0}".
  - HAT0601
    The action {0} specifies an invalid parameter.
  - HAT0602
    Cannot insert null value to the host screen at row {0}, column {1}.
  - HAT0603
    Cannot insert the value {0} to the host screen at row {1}, column {2}, because the host screen size is {3}.
  - HAT0604
    An exception occurred while calculating the value for the global variable {0}. The action which failed was {1}. A message containing the exception details follows.
  - HAT0605
    An error occurred while processing the actions for the screen customization "{0}".
  - HAT0606
    Global variable "{0}" does not exist.
  - HAT0607
    The index {0} for global variable "{1}" is out of bounds. The global variable has {2} elements.
  - HAT0608
    Cannot insert the value "{0}" to the host screen at row {1}, column {2}, because the location is not contained in an unprotected field.
  - HAT0700
    The attribute "{0}" of widget setting does not exist.
  - HAT0701
    The value of attribute "{0}" in widget setting is empty.
  - HAT0702
    The value of attribute "{0}" in widget setting is invalid.
  - HAT0703
    An error occurred while processing a transformation fragment {0}.
  - HAT0800
    An exception occurred setting the property of print session. A message containing the exception details follows.
  - HAT0801
    An exception occurred processing PDF I/O to client browser. A message containing the exception details follows.
  - HAT0910
    User credentials could not be retrieved from Web Express™ Logon.
  - HAT0911
    Web Express™ Logon macro could not be initialized.
  - HAT0912
    Web Express™ Logon cannot retrieve user credentials because the client servlet request was not provided.
  - HAT0913
    Web Express™ Logon cannot retrieve user credentials because the credential mapper was not initialized.
  - HAT0914
    Verify that the connection has been configured to support Web Express™ Logon.
  - HAT0915
    The plug-in {0} is not appropriate for the environment it is running in. Be sure to choose the proper plug-in implementation class for IBM® or Standard portlet environments.
  - HAT1300
    Event payload type must be serializable.
  - HPS5001
    The value {0} of the attribute {1} in the XML element {2} is not a valid value
  - HPS5007
    Failed to delete the file named {0}
  - HPS5008
    There was an error reading the file {0}
  - HPS5009
    There was an error writing the file {0}
  - HPS5010
    The installation directory parameter {0} specifies a directory {1} that is not an absolute path
  - HPS5011
    The installation directory parameter {0} specifies a path {1} that does not exist
  - HPS5012
    {0} is not a directory
  - HPS5013
    The XML element {0} is missing the required attribute {1}
  - HPS5014
    The initialization parameter {0} is missing. It should specify the installation directory name
  - HPS5015
    The XML element {0} is missing either the attribute {1} or the attribute {2}
  - HPS5016
    The XML element {0} is not a valid element in the file {1}
  - HPS5017
    Unexpected error {0} occurred. {1}
  - HPS5018
    An unexpected exception has occurred. {0}.
  - HPS5019
    There was an XML parse error while reading the file {0} or its DTD file at line {1} in column {2}. The error message is {3}
  - HPS5020
    An exception occurred while parsing XML file {0} : {1}.
  - HPS5021
    Invalid value of attribute {0} in object {1}. {0} can only be greater than 0.
  - HPS5022
    Invalid value of attribute {0} in object {1}. {0} cannot be equal to 0
  - HPS5023
    Invalid value of attribute {0} in object {1}. {0} can only be 0 or higher
  - HPS5024
    Invalid value of attribute {0} in object {1}. {0} can only be -1 or higher.
  - HPS5025
    Missing mandatory attribute {0} in object {1}
  - HPS5027
    Error creating object {0}. Object {1} not defined.
  - HPS5028
    Object {0} already defined
  - HPS5029
    The runtime is not started.
  - HPS5030
    {0} expired. Cannot get a connection from {1}.
  - HPS5031
    Object {0} not defined
  - HPS5032
    Cannot load Pool Manager {0}
  - HPS5033
    Too little memory. {0} bytes available
  - HPS5034
    No HttpSession available
  - HPS5035
    There is no data source object {0} in HttpSession. A possible cause is the use of multiple browsers from a single machine to a chained application. See documentation for more information.
  - HPS5036
    Attempt to create user list with invalid type: {0}.
  - HPS5037
    Attempt to create user list with invalid name: {0}.
  - HPS5038
    Error creating object {0}. Object is empty
  - HPS5039
    Cannot get a User from user list {0}
  - HPS5040
    Invalid value of attribute {0} in object {1}. {0} can only be -1 or greater than 0
  - HPS5041
    Value of attribute {0} specified, but no file name specified.
  - HPS5043
    Internal error, attribute {0} in Conn object is null.
  - HPS5044
    SQL connection is closed.
  - HPS5045
    JDBC exception while checking connection state : {0}
  - HPS5046
    JDBC driver {0} not loadable, received exception: {1}
  - HPS5047
    JDBC getConnection call failed for URL {0}, received exception: {1}
  - HPS5048
    Call to method {0} not expected for JDBC connections.
  - HPS5049
    The following Session properties are not acceptable to HOD : {0}. Exception received: {1}
  - HPS5050
    Cannot recover connection if HodLogonSpec is null.
  - HPS5051
    Cannot recover connection if logon or alternate logon macros are null
  - HPS5052
    Cannot set up a connection to the host using the following session properties: {0}
  - HPS5053
    Received InterruptedException: {0}
  - HPS5054
    Macro state STATE_EMPTY not reached. Current® macro state is {0}
  - HPS5055
    Ran out of time while playing HOD macro: Macro file name = {0} Macro = {1}
  - HPS5056
    Problem encountered while playing macro in file {0} Current® state is {0} Initial fragment of the macro: {1}
  - HPS5057
    PropertyVetoException received from HOD: {0}
  - HPS5058
    MacroException received from HOD: {0}
  - HPS5059
    HOD extract event {0} not expected. Extracts are not permitted in logon or logoff macros
  - HPS5060
    Both UserPool and BeanRef are null - cannot provide value for prompt {0} to HOD macro
  - HPS5061
    Ran out of time while supplying prompt values to HOD macro in file {0}. Exception received: {1}
  - HPS5062
    Macro prompt value could not be provided. Exception received: {0}
  - HPS5063
    Received the following MacroErrorEvent while playing HOD macro: {0}
  - HPS5064
    No get_userid method (with either 0 or 1 argument) in bean
  - HPS5065
    No get_password method in bean
  - HPS5066
    No "getter" method {0} for parameter {1} in bean {2}
  - HPS5067
    Exception received when calling getter method in bean: {0}
  - HPS5068
    Exception received: {0}
  - HPS5069
    Attempt to set connection state to {0} is not valid.
  - HPS5070
    Cannot change originating Pool. Old: {0}, New: {1}.
  - HPS5071
    Cannot change connection specification. Old: {0}, New: {1}
  - HPS5072
    There is no Pool Manager
  - HPS5073
    An encryption key is needed to start the system.
  - HPS5074
    An encryption key is needed because user list {0} is encrypted.
  - HPS5075
    Received STATE_PLAY_ERROR while playing macro in file {0}
  - HPS5077
    Session is in CONNECTION_ACTIVE state, but not CONNECTION_READY state. A possible reason could be that the TN server port specified does not support the data stream expected. Session properties being used: {0}
  - HPS5079
    HOD macro {0} has one or more syntax errors
  - HPS5080
    Invalid value of attribute {0} in object {1}. {0} can only be -1 or greater than {2}
  - HPS5081
    The value {0} assigned to the attribute {1} in the file {2} is not valid. It should be a number. A value of {3} will be used.
  - HPS5082
    Missing property {0} in user list {1}
  - HPS5083
    Failed to find the file named {0}
  - HPS5084
    Could not set up a connection
  - HPS5085
    Licenses used ({0}) exceeding licenses purchased ({1}). For more information on licensing enablement, see the InfoCenter at ({2}).
  - HPS5086
    Invalid value of attribute {0} in object {2}. {0} cannot be greater than attribute {1}. The value of attribute {1} will be used.
  - HPS5090
    System start
  - HPS5091
    System shutdown
  - HPS5092
    {0} Security attribute {1} appears to be corrupted, or the encryption key is incorrect. {2}
  - HPS5093
    {0} Invalid schema value for {1} property. {2}
  - HPS5094
    {0} User property {1} conflicts with schema. {2}
  - HPS5095
    User {0} not found in user list {1}
  - HPS5096
    Pool {0} exceeded its capacity. Overflow connection created
  - HPS5097
    Pool {0} exceeded its capacity. Request failed
  - HPS5098
    Ran out of time while playing HOD macro: Macro file name = {0} Macro = {1} Exception received: {2}
  - HPS5099
    Internal error, the following attribute or result is unexpected {0}
  - HPS5100
    User ID {0} from UserPool {1} was used to set up a session to host {2}, and must be recovered
  - HPS5101
    The WebSphere® servlet engine cannot create an HttpSession object to store the host connection with the key {0}.
  - HPS5102
    Insufficient rights to the file {0}. Please check file owner and permissions
  - HPS5103
    The data source connection has been removed, probably because the maxBusyTime has expired
  - HPS5107
    User list {0} not found
  - HPS5108
    Connection Pool {0} not found
  - HPS5109
    Hostname {0} cannot be resolved
  - HPS5110
    RemoteException received when making RMI call: {0}
  - HPS5111
    Integration object {0} has no methods. Check your Java™ CLASSPATH
  - HPS5117
    Key {0} not present in message file
  - HPS5136
    There is no runtime on host "{0}" named {1}.
  - HPS5137
    Checkin screen did not match current PS. Connection = {0} ECL error = {1} Screen description = {2} Screen dump = {3}
  - HPS5142
    License limit has been reached. No further connections are allowed. For more information on licensing enablement, see the InfoCenter at ({0}).
  - HPS5143
    An Exception was caught when creating an HOD screen for connection {0}. This probably is caused by an environment configuration problem. Perhaps the X Window System DISPLAY variable is not set, or RAWT is not configured properly.
  - HPS5145
    Cannot connect to the host using SSL. If importing a certificate is required for this SSL connection, make sure that it has been imported from the Telnet server into a valid PKCS12 file, and that the password (SSLP12Password) and path (SSLP12FilePath) for the PKCS12 file are specified correctly. The session properties are: {0}
  - HAT5551
    Parameter {0} is missing
  - HAT5552
    Conflicting parameters {0}
  - HAT5556
    File has been opened {0}
  - HAT5557
    File not found {0}
  - HAT5561
    A fix for {0} cannot be applied to {1}.
  - HAT5562
    {0} fix information for {1} was not found in {2}
  - HAT5563
    {0} cannot be restored because it has not been applied
  - HAT5564
    {0} cannot be committed because it has not been applied
  - HAT5565
    Fix {0} has an unknown type {1}
  - HAT5571
    CAPAR {0} was applied on {1}
  - HAT5572
    CAPAR {0} was committed on {1}
  - HAT5573
    CAPAR {0} has an unknown state {1}
  - HAT5574
    APAR {0} was applied on {1}
  - HAT5575
    APAR {0} was committed on {1}
  - HAT5576
    APAR {0} has an unknown state {1}
  - HAT5577
    Fix type {0} is a valid type for {1}
  - HAT5578
    APAR {0} for build {1} will be applied to build {2}
  - HAT5579
    CAPAR {0} for build {1} will be applied to build {2}
  - HAT5581
    Source file {0} is available
  - HAT5582
    There are no CAPARs applied to this component.
  - HAT5583
    There are no APARs applied to this component.
  - HAT5584
    There are no CAPARs or APARs applied to this component
  - HAT5585
    The {0} build level is {1} dated {2}
  - HAT5586
    Report for {0} version {1}
  - HAT5587
    CAPAR {0} includes fix {1}
  - HAT5588
    APAR {0} includes fix {1}
  - HAT5589
    {0} is not applied or committed
  - HAT5590
    {0} is included in fix {1}
  - HAT5591
    {0} cannot be applied because it was superseded by {1}
  - HAT5592
    {0} cannot be applied until prereq fix {1} is committed
  - HAT5593
    {0} cannot be applied because it requires prereq fix {1}
  - HAT5594
    {0} has already been applied
  - HAT5595
    Write permission is denied for target {0}.
  - HAT5596
    Source file {0} is missing
  - HAT5597
    Read permission is denied for {0}
  - HAT5598
    Checking source file {0}
  - HAT5599
    {0} - Checking applied fix {1}
  - HAT5602
    Checking target file {0}
  - HAT5603
    Target file {0} is missing and cannot be replaced
  - HAT5604
    Directory {0} is missing
  - HAT5605
    Existing file {0} will be replaced
  - HAT5606
    Target file {0} is missing and cannot be removed
  - HAT5607
    Target file {0} is missing and cannot be restored
  - HAT5611
    File {0} was previously backed up
  - HAT5612
    Checking backup file {0}
  - HAT5613
    Backup file {0} is missing
  - HAT5614
    Target file {0} is missing and will be created.
  - HAT5615
    Write access is permitted for target {0}.
  - HAT5616
    Read access is permitted for {0}
  - HAT5617
    Source file {0}
  - HAT5618
    Target file {0}
  - HAT5619
    Creating directory {0}
  - HAT5620
    Existing target file {0} will be backed up
  - HAT5621
    Backing up file {0}
  - HAT5623
    Applying new file {0}
  - HAT5624
    Removing old file {0}
  - HAT5627
    File {0} was previously restored
  - HAT5628
    Restoring original file {0}
  - HAT5629
    {0} cannot be restored because it has been committed
  - HAT5630
    {0} cannot be restored because it has not been applied
  - HAT5635
    {0} has concurrent {1} fix requirements - see the readme file
  - HAT5641
    {0} has already been committed
  - HAT5642
    {0} must be committed before a new fix can be applied
  - HAT5643
    {0} for build {1} cannot be applied to build {2}
  - HAT5644
    {0} for build {1} cannot be applied to build {2}
  - HAT5645
    The request was successful
  - HAT5646
    The request was not successful
  - HAT5647
    The final return code is {0}
  - HAT5648
    Log file {0} contains 1 additional message.
  - HAT5649
    Log file {0} contains {1} additional messages.
  - HAT5653
    System Information {0} {1}
  - HAT5654
    Today is {0}
  - HAT5655
    Fix type {0} is not a CAPAR or APAR
  - HAT5656
    Unable to construct the XML image {0}
  - HAT5657
    Unexpected xerces exception {0}
  - HAT5658
    Unexpected exception {0}
  - HAT5659
    Internal program problem {0}
  - HAT5700
    User Parameter {0} {1}
  - HAT5703
    Checking {0} root {1}
  - HAT5704
    Unable to locate {0} root {1}
  - HAT5705
    {0} root located {1}
  - HAT5706
    {0} product not found
  - HAT5708
    {0} not found.
  - HAT5710
    {0} located {1}
  - HAT5711
    Fix file not found {0}
  - HAT5712
    Unknown action {0}
  - HAT5713
    Extracting fix {0} ...
  - HAT5714
    Extracting the fix control file {0}
  - HAT5715
    Fix control file {0} is missing
  - HAT5716
    Extracting the fix data files
  - HAT5745
    {0} can not be applied until previous maintenance is applied to your HATS projects. See the readme for information on applying maintenance to your HATS projects.
  - HPS5747E
    Unable to copy application configuration files
  - HPS5748E
    Security Exception {0}
  - HPS5750E
    Arguments are {0}
  - HPS5901
    Exception occurred attempting to create or activate the HATS EJB
  - HPS5902
    Exception occurred while processing the EJB Properties input argument
  - HPS5903
    Exception occurred while processing the EJB Helper object
  - HPS5904
    Exception occurred invoking the EJB Helper object
  - HPS5905
    Exception occurred attempting to invoke ConnMgr to cleanup a connection
  - HPS5950
    {0}: {1}: {2}: HPubEJB2_Reference={3}, JNDI_NAME={4}, PROVIDER_URL={5}, INITIAL_CONTEXT_FACTORY={6}
  - HPS5951
    {0}: accessHandle==null || hPubLinkKey==null
  - HPS5952
    {0}: getEJBObject(): {2}: {3}
  - HPS5953
    {0}: processIO({1}): {2}: {3}
  - HPS5954
    {0}: HPubEJB.remove(), ejb={1}: {2}: {3}
  - HPS5955
    {0}: ejb.getHandle(), ejb={1}: {2}: {3}
  - HPS5956
    {0}: HttpServletRequest.getSession(true), hPubLinkKey={2}
  - HPS6002
    Conn exception while releasing session to the Session Manager
  - HPS6003
    Unable to acquire connection from the Session Manager
  - HPS6004
    Exception while invoking a property's read method
  - HPS6005
    Internal processing error
  - HPS6006
    Introspection exception
  - HPS6007
    Connection Link Key is null when trying to acquire a chained non-web connection
  - HPS6008
    Connection Link Key is null when trying to release a chained non-web connection
  - HPS6009
    Unexpected exception: {exception text}
  - HPS6100
    Unable to acquire session from the Session Manager
  - HPS6101
    Internal HOD macro processing error
  - HPS6102
    Internal macro processing error, extraction coordinates out of bounds
  - HPS6103
    Internal macro processing error, macro empty
  - HPS6105
    Received unexpected interrupted exception while waiting
  - HPS6106
    Unable to communicate with the Session Manager
  - HPS6107
    Illegal access exception while invoking a property's read method
  - HPS6108
    Invocation target exception while invoking a property's read method
  - HPS6109
    Exception occurred, cannot retrieve current screen
  - HPS6112
    Received the following MacroErrorEvent while playing Host On-Demand macro: {0}
  - HPS6202
    Internal error: Unable to locate read method for property
  - HPS6203
    Internal error: Unable to locate marker for end-of-input-variable in SQL statement
  - HPS6204
    Internal error: Unable to locate ForSQL read method for property
  - HPS6205
    SQL error while opening statement
  - HPS6209
    SQL error while executing SQL statement: {0}
  - HPS6210
    Numeric input values cannot be blank. Enter a value for all numeric input fields
  - HPS7001
    Unexpected exception {0}.
- Notices
Advanced Macro Guide
IBM i, System z, and UNIX platform-specific information
Developing WebFacing Applications
FAQs
HATS API References (Javadoc)
HATS Tuning Documentation

HAT0416

An error occurred while forwarding control to WebFacing.

Check that wfContextRoot in wfhats.xml matches the context root of your WebFacing application.