Find/Change Utility panel

The Find/Change Utility allows you to search for or change a string in a PDS, a VSAM data set, or a sequential data set by entering a FIND or CHANGE command on the Command line. You can also search for strings in HFS files.

Panel and field definitions

Figure 1. Find/Change Utility panel
  Process   Options   Help
 ──────────────────────────────────────────────────────────────────────────────
 File Manager                 Find/Change Utility
Command ===>                                                       Scroll CSR  
 Input Partitioned, Sequential or VSAM Data Set, or HFS file:
 Data set/path name  'FMNUSER.DATA'                                  +
    Member . . . . . *            (Blank - selection, pattern - process list)
    Volume serial  .              (If not cataloged)
    Record count . . ALL          (Number of records to be searched)
 - Additional options
 Listing data set  . SRCHFOR.LIST                                  

 Enter "/" to select option                        Listing Option  ISPF Packing
   JCL Source format           Immediate change    1 1. Long       1 1. Asis
   Use REXX proc               Batch execution       2. Summary      2. Pack
   REXX no update              Directory integrity Stats Option      3. Unpack
   Advanced member selection   Memory                           2 1. Off          4. None
   Binary mode, reclen         CAPS initially on    2. Force        5. Skip
 Process List:
 Sel Name     Prompt   Alias-of Size Created    Changed             ID
     M100     Selected
     M1000    Selected
     M10000   Selected
     M10001   Selected
     M10007   Selected
     M10008   Selected
 Command ===>                                                       Scroll PAGE
  F1=Help      F2=Split     F3=Exit      F4=CRetriev  F5=Refresh   F7=Up
  F8=Down      F9=Swap     F12=Cancel                                           
Data set/path name
Can be a fully-qualified data set name or a pattern, an HFS file or directory, a WebSphere® MQ queue name, or a CICS® resource.

For information about specifying a WebSphere® MQ queue name, see Specifying an MQ manager or queue.

For information about specifying a CICS® resource, see Specifying a CICS resource.

The name may include a member name or name pattern in parenthesis. If the member is specified here, the associated Member field must be empty.

When you specify an HFS file or directory, you must enter a full path name. If the path name is longer than the displayed entry field, press the Expand function key to display a pop-up window in which you can enter a longer name.

Member
If you specified the name of a partitioned data set (PDS) without including a member name or name pattern in parenthesis in the Data set name field, then you can use this field to specify the member name or a member name pattern.
Volume serial
Serial number of the volume which contains the data set. Required for data sets which are not cataloged.
Record count
Number of logical records to be searched for FIND/CHANGE/FINDNOT commands. For a PDS, the number of logical records to be searched per member.

Range = 1 - 99,999,999; default = ALL.

Additional options
Collapses or expands the following section of the Find/Change Utility panel.

When a minus sign (-) is shown, position the cursor on the minus sign and press Enter to expand the following section of the panel.

When a plus sign (+) is shown, position the cursor on the plus sign and press Enter to collaps the following section of the panel.

Listing data set
Specifies the data set where File Manager find/change results are to be stored. Use the default name or enter a sequential data set name.

Default: 'userid.SRCHFOR.LIST'

JCL source format
Indicates that the data set contains JCL and that the JCL syntax is to be preserved.
If not successful at maintaining the number and size of records, File Manager attempts to rewrite the file:
  • More errors are possible in this case. For example, a PDS(E) may run out of room.
  • If a logical line is changed and requires more physical records, the file is rewritten. The data in columns 73–80 for new physical records is copied from the last related original physical record.

The file must be non-VSAM and have a fixed record length of 80.

When using the JCL source format option, the columns searched are set to 3 through 71, unless the statement is not a JCL statement. A statement is considered to be a JCL statement if it begins with the strings "/*" or "//". If the statement does not begin with either of these strings, it is not considered to be a JCL statement in which case any column range specified on the FIND (or CHANGE, respectively) command or preset using the BOUNDS command is honored. If no column range has been specified, the full record is searched.

Use REXX proc
You can use this option to perform either of these actions
  • Enter a temporary REXX procedure for one-time use by entering a single asterisk (*). File Manager displays an Edit panel, in which you can create a new REXX procedure.
  • Specify the name of the member containing the REXX procedure you want to use, The member must belong to the PDS allocated to ddname FMNEXEC. You can enter any of the following:
    • The name of the member.
    • A member name pattern (other than a single *) to list all matching members. You can then select the required member by entering an S in the Sel field. A member name pattern can consist of any characters that are valid in a member name and the following two special pattern characters:
      asterisk (*)
      Represents any number of characters. As many asterisks as required can appear anywhere in a member name. For example, if you enter *d*, a list of all members in the data set whose name contains “d” is displayed.
      percent sign (%)
      A place-holding character representing a single character. As many percent symbols as necessary can appear anywhere in a member name. For example, if you enter %%%%, a list of all members in the data set whose name is four characters in length is displayed.
Note: If you select this option but leave the Use REXX proc member entry field blank, File Manager displays a member name list. You can then select the required member by entering S in the Sel field.

(Also, see Supplying a procedure when using a File Manager panel.)

REXX no update
Allows you to specify that you intend no updates to the FCH data set while executing the utility. This option is valid only when a REXX procedure has been specified and is ignored otherwise. If selected, it forces the allocation of the data set as input only. All updates to the data are ignored.
Advanced member selection
Enter "/" to specify a range of members to be selected rather than a specific or generic member name.
Binary mode
When processing an HFS file, allows you to specify binary mode (selected) or text mode (unselected).
reclen
When processing an HFS file and the Binary mode option is selected, records are derived based on the fixed record length specified. The default is 80. Can be in the range: 1–32760.
Use I/O exit
Allows you to specify a user I/O exit for compressed or encrypted data sets.

This option has two fields. To select the option, enter “/” in the field to the left of Use I/O exit. With this selected, you can then specify which exit to use in the field to the right of the field label.

Note:
  1. The field only displays if File Manager is installed with the option USEIOX=ENABLE, and the Exit enabled field (in the Set System Processing Options panel) is set to YES. If a default is specified with either of those options, it is displayed in the field to the right of Use I/O exit.
  2. An I/O exit can only be used to process the data set in which you are creating records. It cannot be used to process the copybook or template that you are using to format the data set.
Immediate change
When you use the CHANGE command, the input data set is updated immediately (without displaying the changes in the listing data set).
Batch execution
Creates JCL to reflect the command entered. The JCL is presented in an Edit session which you can edit before submitting.

Batch execution restricts the member selection to the pattern specified in the member field. Batch execution does not produce a pop-up selection panel for member selection. If you leave the member field blank, an asterisk (*) is substituted in the JCL generated. For more information, see FCH (Find/Change).

Directory integrity
Forces an override of the default PDS(E) member processing method which allows for faster PDS directory access.

This option has significant performance impact. When selected, the members are processed in a way which allows concurrent directory updates as File Manager accesses the members using current directory information.

When not selected, the member processing is performed faster, but may be affected by PDS(E) directory updates, possibly causing I/O errors if the data set is updated concurrently.

Memory
Enter / to perform a change in memory. The following changes occur:
  1. Opens the data set or member for input and reads all the records into memory.
  2. Supports record length changes when the search and replace strings are different lengths and the resultant length is less than or equal to the maximum logical record length of a variable length data set.
  3. Opens for output and writes all the records loaded back to the data set when a change is made.
Note:
  1. This option is ignored for VSAM files.
  2. This option can be used to avoid the restrictions associated with opening the data set in UPDATE mode.
  3. The function is terminated if there is insufficient memory to load the entire member or data set into memory. A larger region size may be required.
  4. For compressed data sets, the change is always performed in memory.
  5. Memory processing performs slower than update in place.
CAPS initially on
Converts the data entered into input fields to uppercase characters. Do not select this option if you want to enter lowercase characters or mixed case data. This option also affects the processing of CHANGE arguments.
Listing Option
Determines the format of the output report.
1 Long
A full report, including each record found or changed.
2 Summary
A summary report providing totals for records processed and strings found and changed.
Stats Option
Determines whether ISPF statistics (if present) for the PDS members being processed are updated:
Blank
Update ISPF statistics.
1 Off
Do not update ISPF statistics.
2 Force
Always update or create ISPF statistics.
ISPF Packing
Provided that the data set is a sequential, PDS or PDSE file and an I/O exit routine is not used, one of these options can be used to control the utility's behavior when processing data that is in ISPF PACK format.
1. Asis
If the data set is packed, it is unpacked before any processing. The data set is rewritten in packed format only when it was packed initially.
2. Pack
If the data set is packed, it is unpacked before processing. The data set is always rewritten in unpacked format.
3. Unpack
If the data set is packed, it is unpacked before processing. The data set is always rewritten in packed format.
4. None
No checking or processing of ISPF packed data occurs. The FIND and CHANGE commands operate on the packed data. This option is forced if an I/O exit has been used.
5. Skip
If the data is packed, no processing occurs.

Parent panels

Equivalent functions

Related tasks and examples